JET_Affinity Posted October 28, 2019 Share Posted October 28, 2019 On 10/26/2019 at 3:08 AM, deeds said: To me, these are yet another indication that the product design constraints and compromises favoured illustration, not design. Sorry, but I don't follow your seeming elevation of design over illustration. Realistic or technical commercial Illustration is a far more exacting discipline, requiring precise detail editing at the level of precisely shaped freeform paths; not just upper level constructs with automatic parameters. Quote The features you're talking about in Adobe Blends, that are useful for iterative and explorative design, came about as a byproduct of the desire to provide complex gradient creation and editing - via blends - something blend shapes are only tangentially suitable for. It was Adobe's way of saving time by repurposing focus on heavy blends gradients rather than creating a good set of gradient tools. Gradients are entirely different constructs from object blends. Gradients are "canned" algorithmic rendering commands. In terms of commercial print reproduction, they are specific PostScript objects understood by the printing engine. They actually vary according to the resolution of the imaging device. Path blends are means by which to automate creation of a series of separate objects expressly defined by the illustrator or designer. You can't do the kinds of blends needed for realistic illustration with a canned grad command. You can do it with gradient meshes, but that is usually far more tedious and less predictable. In serious illustration work, one often creates blends between gradient fills in order to render such things as shading and reflection. Path blends interpolate node-to-corresponding-node in the order of path direction. This gives illustrators the necessary control over shaping the shading results for everything from convincing metallic reflections and transparent plastic to human flesh. Quote When Adobe Illustrator is viewed through the tunnel of programmer art creation requirements and thinking, you get Sketch, from Bohemian Coding. Well, when I think of vector-based "programmer art", I think in terms of ECMI-based FlashScript, another important product line which was basically wrecked under Adobe's handling, setting a whole powerful creative medium back by decades. On the other hand, I have yet to see a better or more thoroughly-documented application-specific user scripting implementation in a suite of 2D vector-based illustration and design programs than what Adobe branded as ExtendScript. That's another whole world of potential for using graphics software as something more than a mere interface, the advancement of which has been hamstrung by Adobe's abusive marketing. But all that's getting far off-topic from an at least next-step-more-innovative blend feature. Quote When viewing Adobe Illustrator through the prism of creative design requirements, it looks abhorrent. Because it is. Freehand, Xara and CorelDraw were better for general design, Fireworks was in a class of its own for UI design, and Flash was an innovative set of odd ideas that sort of worked. Again, I don't get your "design over illustration" fixation. The "big four" historic competitors since the early days of the PostScript "desktop publishing revolution" were FreeHand, Illustrator, Canvas, and Draw; all intended as the vector graphics (illustration first; design second) leg of the raster/vector/assembly three-legged publishing platform. In that model, the assembly program (be it print or web-centric) has always been regarded by conventional-wisdom as the "design" environment. In fact, it still remains a frequent battle to make many freelance document designers understand that most of the projects they handle in a given year are better suited for completion in the drawing program than in the repetitive-layout-focused feature set of the page-assembly program. In a nutshell, the differences between the still more fleshed-out 2D Bezier drawing programs boils down to the user interface, of which I consider Illustrator's worst-of-class. Fireworks drawing model was sort of "spun off" from that of Flash (which came from Macromedia's acquisition of upstart SmartSketch) in order to serve as (primarily) a web-centric design tool. But the illustration power of Flash is not its drawing interface. It is programmed interactive animation of not just buttons and such for web effects, but of programmed illustrations themselves; things like interactive simulators of mechanical systems. For example, I replicated the actual programming logic of a bus's multiplex diagnostic system as an interactive training solution for mechanics. A technical illustrator could branch into that kind of stuff with commercial-quality results using Flash far more easily than via raw JavaScript and SVG, because it is a full-blown development environment complete with its own graphics layer and scripting model (FlashScript). Quote Affinity Designer has somewhat gotten the effects right, but the rendering is bad, particularly in things like gradients and glows, shadows and blendings between them. Again, to a serious illustrator, path blends are not merely for canned effects. They are a means for efficiently creating very deliberate node-by-node control over shading to render realistic surfaces, objects, shadows, reflections, etc. Blends are essential to realistic 2D Bezier-based illustration. Quote Affinity Designer vector node editing remains its strongest point… I have to disagree there, too. It's "getting there," but there remains work to be done in that regard. FreeHand was not perfect, but its Bezier handling interface has yet to be matched in terms of powerful elegance. While you say you consider Xara "better [than Illustrator] for general design", its Bezier path handling is sub-standard, basically limited to the "click-click-bend" method, which, while useful for certain reasons, is inefficient and tedious otherwise. So yeah, Affinity's Bezier editing is already vastly better than that; but that's not really saying much. Quote I'm using less than 10% of Affinity Designer because I don't have a Wacom device, is how I view this. I have little to no use for a stylus as a pointing device. I don't even have one connected to my primary workstation. And I have no interest at all for "finger painting" on a tablet. Perhaps that's where we miscommunicate. Maybe when you say "illustration" you're just thinking of the cartoony styles of illustration in which people try to mimic so-called "natural media" by swiping freehand with a stylus, trying to mimic painting in a vector-based drawing program. To my mind, that is actually antithetical to the intent and purpose of vector-based illustration. JET Quote Link to comment Share on other sites More sharing options...
jstnhllmn Posted October 29, 2019 Share Posted October 29, 2019 @deedsNails it. In an effort to refresh both design and software skills (dormant since art school over a decade ago), I purchased the suite. I've been fiddling, running through tutorials on Skillshare, seeing what still works in my artistic brain. Sadly, AD is technologically incapable of allowing users to complete a frustrating majority of elementary design projects. I think this is generally where @deedsfinds the pillar of his argument that AD is much more for illustration than design. There's too much that it cannot do that anyone who expects to work seriously will need it to do. AD is a 20th century solution to 21st century design problems. Until it grows up, the only aspect of all-things Adobe where an argument can be made for it is through the pricing model, which seems wonderful, until tripping over the inability to execute a specific, relatively fundamental design technique leads to the asphyxiation and stymieing of the creative mind. The "roadmap" that a prospective buyer might peruse before deciding to make a purchase is a well-manicured cul-de-sac. Jowday, deeds, Move Along People and 3 others 3 2 1 Quote Link to comment Share on other sites More sharing options...
deeds Posted November 8, 2019 Share Posted November 8, 2019 On 10/29/2019 at 12:06 AM, JET_Affinity said: On 10/26/2019 at 5:38 PM, deeds said: To me, these are yet another indication that the product design constraints and compromises favoured illustration, not design. Sorry, but I don't follow your seeming elevation of design over illustration. You got this right. Then built.a straw man, anyway. Jowday 1 Quote Link to comment Share on other sites More sharing options...
DarkClown Posted February 24, 2020 Share Posted February 24, 2020 Just wondering ... it's 2020 now ... any news on this one? deeds 1 Quote i7-12700KF, 3.60 GHz, 32GB RAM, SSD, NVIDIA GeForce RTX 3070, Wacom Intuos 4 Tablet, Windows 11 Pro - AP, AD and APublisher V1 and V2https://www.timobierbaum.com Link to comment Share on other sites More sharing options...
Oval Posted February 24, 2020 Share Posted February 24, 2020 13 minutes ago, DarkClown said: any news on this one No news are bad news :-) Tatom 1 Quote Link to comment Share on other sites More sharing options...
DarkClown Posted February 25, 2020 Share Posted February 25, 2020 Pretty sure it is on one of the future feature lists ;-) ... very, very future ... ;-) deeds 1 Quote i7-12700KF, 3.60 GHz, 32GB RAM, SSD, NVIDIA GeForce RTX 3070, Wacom Intuos 4 Tablet, Windows 11 Pro - AP, AD and APublisher V1 and V2https://www.timobierbaum.com Link to comment Share on other sites More sharing options...
Jowday Posted February 28, 2020 Share Posted February 28, 2020 On 10/29/2019 at 6:13 AM, jstnhllmn said: @deedsNails it. In an effort to refresh both design and software skills (dormant since art school over a decade ago), I purchased the suite. I've been fiddling, running through tutorials on Skillshare, seeing what still works in my artistic brain. Sadly, AD is technologically incapable of allowing users to complete a frustrating majority of elementary design projects. I think this is generally where @deedsfinds the pillar of his argument that AD is much more for illustration than design. There's too much that it cannot do that anyone who expects to work seriously will need it to do. AD is a 20th century solution to 21st century design problems. Until it grows up, the only aspect of all-things Adobe where an argument can be made for it is through the pricing model, which seems wonderful, until tripping over the inability to execute a specific, relatively fundamental design technique leads to the asphyxiation and stymieing of the creative mind. The "roadmap" that a prospective buyer might peruse before deciding to make a purchase is a well-manicured cul-de-sac. I always said this - Affinity Designer is an advanced paint tool and will probably never evolve into much more. Just monitor Affinity Spotlight articles... and uninspiring, light updates like 1.7 and 1.8. deeds and Markio 2 Quote "The user interface is supposed to work for me - I am not supposed to work for the user interface." Computer-, operating system- and software agnostic; I am a result oriented professional. Look for a fanboy somewhere else. “When a wise man points at the moon the imbecile examines the finger.” ― Confucius Not an Affinity user og forum user anymore. The software continued to disappoint and not deliver. Link to comment Share on other sites More sharing options...
David in MA Posted February 29, 2020 Share Posted February 29, 2020 I'd just like to add another vote for this feature. It's important to our work and we are in the process of switching from Adobe to Affinity. The lack of this feature is a bit of a stumbling block. In the process of trying to find a workaround, I came up with an idea for another tool as well. In Photos, the grow/shrink option under the Selection menu allows one to expand or contract the selection marquee by a specified number of pixels. It would be great to have a similar option in Designer that grows/shrinks a closed path or shape by a specified distance. It should be easy to implement since they've already coded this for selection marquees. Quote Link to comment Share on other sites More sharing options...
rasoolakhter Posted February 29, 2020 Share Posted February 29, 2020 Even Shape builder tool is very important I updated 1.8 and same is there no big changes just I think need to concentrate of shape blender tools Quote Link to comment Share on other sites More sharing options...
dominik Posted February 29, 2020 Share Posted February 29, 2020 2 hours ago, David in MA said: It would be great to have a similar option in Designer that grows/shrinks a closed path or shape by a specified distance. Hello @David in MA, wouldn't it work to type into the transform panel's field 'W: 200px-2' and set aspect ratio to locked? To me this seems to be pretty much the same. d. Quote Affinity Suite on Windows (V2) and iPad (V2). Beta testing when available. Windows 11 64-bit - Core i7 - 16GB - Intel HD Graphics 4600 & NVIDIA GeForce GTX 960M iPad pro 9.7" + Apple Pencil Link to comment Share on other sites More sharing options...
David in MA Posted February 29, 2020 Share Posted February 29, 2020 1 hour ago, dominik said: Hello @David in MA, wouldn't it work to type into the transform panel's field 'W: 200px-2' and set aspect ratio to locked? To me this seems to be pretty much the same. d. Not exactly. That would work for a square or circle, but for irregularly shaped paths/objects it would scale the whole shape toward the center, even if locally at a point on the curve the interior is away from the center. For example, the outline of a thick letter 'C'. Your method would reduce the size of the whole shape proportionately. What I'm thinking is if you shrink the outline so the C becomes skinnier, ie, the outline of the C moves toward the interior, not toward the center of the whole object. Quote Link to comment Share on other sites More sharing options...
dominik Posted February 29, 2020 Share Posted February 29, 2020 1 hour ago, David in MA said: Not exactly. That would work for a square or circle, but for irregularly shaped paths/objects it would scale the whole shape toward the center, even if locally at a point on the curve the interior is away from the center. For example, the outline of a thick letter 'C'. Your method would reduce the size of the whole shape proportionately. What I'm thinking is if you shrink the outline so the C becomes skinnier, ie, the outline of the C moves toward the interior, not toward the center of the whole object. I did a little test with multiple strokes on a letter C (converted to curves). Visually a wider outline is close to an offset path. I compared it to a copy of the letter that I shrank by the same amount of pixels as the stroke width. And, yes, the result is not the same, only somewhere in that area. Too bad that my idea doesn't work 🙁 d. Quote Affinity Suite on Windows (V2) and iPad (V2). Beta testing when available. Windows 11 64-bit - Core i7 - 16GB - Intel HD Graphics 4600 & NVIDIA GeForce GTX 960M iPad pro 9.7" + Apple Pencil Link to comment Share on other sites More sharing options...
cdnmoondog Posted March 5, 2020 Share Posted March 5, 2020 this drive me nuts. NO blend tool to morph objects from one to another! I had heard that it could be done in affinity photo. Downloaded a trial to see. While there IS object manipulation (thank ffing god!), there is NO MORPHING features that I could find. What the hell? This is something that is not a new idea (go back 15+ years ago and look at FREEHAND MX) Now both designer and photo have been recently updated with Jack S in them! Guys!! You want to compete with Adobe?? Get with the program! This feature should have been a priority ages ago. jstnhllmn 1 Quote Link to comment Share on other sites More sharing options...
Phil_rose Posted March 5, 2020 Author Share Posted March 5, 2020 Maybe if you yell more stridently they'll put it into their programs for you more quickly! Quote I like turtles! Windows 11 Sony A7iii Sony A7riii Sony A7Rii Sony RX10 Mkiii Canon G5x Mavic Mini drone A partridge A pear tree (occupied) www.philrosephoto.com Link to comment Share on other sites More sharing options...
Oval Posted March 5, 2020 Share Posted March 5, 2020 9 hours ago, cdnmoondog said: want to compete with Adobe?? No. Quote Link to comment Share on other sites More sharing options...
cdnmoondog Posted March 5, 2020 Share Posted March 5, 2020 5 hours ago, Phil_rose said: Maybe if you yell more stridently they'll put it into their programs for you more quickly! ya think? OK Just venting about the lack of this feature I guess. It's been recommended by many. Quote Link to comment Share on other sites More sharing options...
cdnmoondog Posted March 5, 2020 Share Posted March 5, 2020 3 hours ago, Oval said: No. True. But (not being a fan of the murderer of MacroMedia Freehand) I would like Affinity to step the game up. Quote Link to comment Share on other sites More sharing options...
ralisdaum Posted April 22, 2020 Share Posted April 22, 2020 +1 for blend tool Quote Link to comment Share on other sites More sharing options...
jstnhllmn Posted April 22, 2020 Share Posted April 22, 2020 +1 for unicorns. Oval 1 Quote Link to comment Share on other sites More sharing options...
TNT1120 Posted April 23, 2020 Share Posted April 23, 2020 Well, this was disappointing to find...I really would've thought it was possible in Designer by now. I've been using this tool since Illustrator '88...and that came out in 1987. Between morphing/blending shapes and colors, it's a HUGE time-saver. Auto-trace has been around just as long but I think I'd even choose blend over trace if Serif isn't interested in both. I know all the Affinity programs have been written from zero, but Serif was there back in the day when these features were in use... Tatom 1 Quote Link to comment Share on other sites More sharing options...
aaafff Posted September 1, 2020 Share Posted September 1, 2020 +1 for blend tool! Tatom 1 Quote Link to comment Share on other sites More sharing options...
GaryJ Posted September 1, 2020 Share Posted September 1, 2020 Hi ~ I'm new to Designer, a long-time Illustrator and FreeHand user. I love Aff. Designer! But I am sorely missing that Blend tool. Sure do hope it gets added to Designer soon! Also a spiral tool would be great, ala Illustrator and FreeHand. –So, I just wanted to add my vote and encouragement to Aff.Des. developers... Thanks for this fine application! Quote Link to comment Share on other sites More sharing options...
tom.s Posted September 2, 2020 Share Posted September 2, 2020 +1 for another missing feature that was on the roadmap at one time but who knows. jstnhllmn 1 Quote Link to comment Share on other sites More sharing options...
baoyu Posted September 7, 2020 Share Posted September 7, 2020 +1 even more features are needed like: envelop distortion, re-color, transform live filter.... jstnhllmn 1 Quote Link to comment Share on other sites More sharing options...
David in MA Posted September 28, 2020 Share Posted September 28, 2020 I'm trying to resurrect some design files originally created with Illustrator and saved as Adobe PDF. Many use gradient shading or blended shapes. These look fine in any PDF viewing app, but Designer is still not able to render or work with these. Very frustrating. I hope they implement gradient shading and blended shapes soon. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.