Gnobelix Posted December 12, 2017 Share Posted December 12, 2017 13 minutes ago, Mark Ingram said: I've spoken with the guy who wrote the Shadows & Highlights algorithm and he's said this will be improved for the next beta. I am looking forward to further improvements...... Best Regards Henry Stahle 1 Affinity Photo 2.4: Affinity Photo 1.10.6: Affinity Designer 2.4: Affinity Designer 1.10.6: Affinity Publisher 2.4: Affinity Publisher 1.10.6: Windows 11 Pro (Version 23H2 Build (22631.3527) Link to comment Share on other sites More sharing options...
Uwe367 Posted December 12, 2017 Share Posted December 12, 2017 Good to read such news. Big thanks to the guy and i'm looking forward for the next beta Have a nice day. Ich wünsche einen schönen Tag. Link to comment Share on other sites More sharing options...
verysame Posted December 12, 2017 Share Posted December 12, 2017 9 hours ago, Mark Ingram said: I've spoken with the guy who wrote the Shadows & Highlights algorithm and he's said this will be improved for the next beta. That's a good news, thanks! Andrew - Win10 x64 AMD Threadripper 1950x, 64GB, 512GB M.2 PCIe NVMe SSD + 2TB, dual GTX 1080ti Dual Monitor Dell Ultra HD 4k P2715Q 27-Inch Link to comment Share on other sites More sharing options...
Max N Posted December 13, 2017 Share Posted December 13, 2017 Once again I tested the work of lights and shadows. Details on the video.If raw is good, then light and shadow work very well. Increasing the clarity no longer looks terrible.At the end of the video, in the RAW module, almost HDR is sawed. Only HSL for the selected colors is missing.Thanks to the developers for the work done! Keep it up! TEcHNOpls, PaulAffinity, worf2 and 1 other 4 __________________ Windows 11 64-bit, AMD Ryzen 9 3900 + Nvidia 1660 Super + Nvidia Studio driver + 32 Gb RAM. Link to comment Share on other sites More sharing options...
Rafal Posted December 18, 2017 Share Posted December 18, 2017 It's been a year since i bought AP and the bug that is very unnoying to me (and actually prevents me from using AP completaly) haven't been fixed yet. I am talking about some wacom tablets lags and strokes that are not a perfect curves. I am very disappointed, whole round year and all i see was one attemp to improve it with with a updated that was reverted. Not a word since then about any work toward fixing this problem. Link to comment Share on other sites More sharing options...
Halo Posted December 19, 2017 Share Posted December 19, 2017 13 hours ago, Rafal said: It's been a year since i bought AP and the bug that is very unnoying to me (and actually prevents me from using AP completaly) haven't been fixed yet. I am talking about some wacom tablets lags and strokes that are not a perfect curves. I am very disappointed, whole round year and all i see was one attemp to improve it with with a updated that was reverted. Not a word since then about any work toward fixing this problem. Sadly, i must agree. I have mentioned this bug numerous times and the connection in threading to the history tab (that makes matters worse). I have forwarded these (and other) detailed problems to one of the moderators, but yet nothing has changed. - lag with input devices with open history tab - not working details slider with denoise filter - anti aliasing problems with uneven zoom levels The stabilizer is a mediocre workaround for the "edgy lines / curves", but solves not the core of the problem. In the actual state, i can't switch from PS to a Affinity Pipeline. These problems are critical and should be adressed. Link to comment Share on other sites More sharing options...
Rick G Posted December 19, 2017 Share Posted December 19, 2017 10 minutes ago, Halo said: Sadly, i must agree. I have mentioned this bug numerous times and the connection in threading to the history tab (that makes matters worse). I have forwarded these (and other) detailed problems to one of the moderators, but yet nothing has changed. - lag with input devices with open history tab - not working details slider with denoise filter - anti aliasing problems with uneven zoom levels The stabilizer is a mediocre workaround for the "edgy lines / curves", but solves not the core of the problem. In the actual state, i can't switch from PS to a Affinity Pipeline. These problems are critical and should be adressed. Have they acknowledged the bug? Are others having the same issue? Have you contacted support? Any chance it is something on your machine? I am on a Windows 10 desktop so I am probably not much help. There are bugs that get reported and just sit there for some reason, unacknowledged. It really can make one wonder Affinity Designer 2.2.2075 & beta 2.3.1.2212 Affinity Photo 2.2.2075 beta 2.3.1.2212Affinity Publisher 2.2.2075 & beta 2.3.1.2212 Windows 11 Pro Version 22H2 OS build 22621.1928 Processor Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz 2.90 GHz Installed RAM 16.0 GB (15.7 GB usable) System type 64-bit operating system, x64-based processor Link to comment Share on other sites More sharing options...
Halo Posted December 19, 2017 Share Posted December 19, 2017 55 minutes ago, Rick G said: Have they acknowledged the bug? Are others having the same issue? Have you contacted support? Any chance it is something on your machine? I am on a Windows 10 desktop so I am probably not much help. There are bugs that get reported and just sit there for some reason, unacknowledged. It really can make one wonder Yes, the mod has acknowledged most of the bugs. No, i haven't contacted support. Do the Devs look into this forum? The proability that my machine has problems is near zero because: - I have these problems since release and installed windows two times. - I have now a new pc with near zero applications on it, still these problems persist. - The hardware shouldnt a problem: skylake 7820x with 32gigs of ram and a 1080ti. I use mostly the pc for Photoshop, rendering with Blender (CUDA is nice), ZBrush and mediocre gaming. I had high hopes to turn back from Adobe. Link to comment Share on other sites More sharing options...
Rick G Posted December 19, 2017 Share Posted December 19, 2017 10 minutes ago, Halo said: Yes, the mod has acknowledged most of the bugs. No, i haven't contacted support. Do the Devs look into this forum? - I have these problems since release and installed windows two times. No the hardware should not be an issue unless there is a driver issue somewhere Reinstalling Windows 10? Been there done that and have the t shirt. The joys of being a Microsoft alpha tester (Yes I am referring to the so-called stable releases NOT the insider track) If this behavior is happening in the release version of AP, contact support as they may have run into this. If it is just in the beta, then you are stuck with support from this forum You MIGHT keep task manager open while you are trying to do some of these tasks to see if anything starts going crazy or dogging down the system Good luck with it Affinity Designer 2.2.2075 & beta 2.3.1.2212 Affinity Photo 2.2.2075 beta 2.3.1.2212Affinity Publisher 2.2.2075 & beta 2.3.1.2212 Windows 11 Pro Version 22H2 OS build 22621.1928 Processor Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz 2.90 GHz Installed RAM 16.0 GB (15.7 GB usable) System type 64-bit operating system, x64-based processor Link to comment Share on other sites More sharing options...
PaulAffinity Posted December 19, 2017 Share Posted December 19, 2017 1 hour ago, Halo said: Sadly, i must agree. I have mentioned this bug numerous times and the connection in threading to the history tab (that makes matters worse). I have forwarded these (and other) detailed problems to one of the moderators, but yet nothing has changed. - lag with input devices with open history tab - not working details slider with denoise filter - anti aliasing problems with uneven zoom levels The stabilizer is a mediocre workaround for the "edgy lines / curves", but solves not the core of the problem. In the actual state, i can't switch from PS to a Affinity Pipeline. These problems are critical and should be adressed. Hi guys, while I sympathize, I really am confused here. I am loooong time Wacom user Bamboo Touch 480. 6 year old Toshiba satellite Pro, Win 7 8 gb ram and and 1200 CPU... Yep 1200 built in GPU.! 6 years ago I spent Months trying to get the drivers working, I even used to reload the drivers EVERY TIME I switched my laptop on just to use my Wacom on PS CS6. Eventually it got sorted after months of various configuration, changes and tests. (40 years IT expertise, too!) Bulletin boards then were full of issues with Wacom drivers, compatibility and conflicts... In short my Wacom Bamboo works slickly and smoothly on PS AND Affinity Photo.... Although the initial betas were flaky. While there may be some coding changes Affinity can receive I really am wondering how a crappy 6 year old underpowered laptop with win 7 and an old small Wacom works great and yours with beasts of machines do not? When I had issues, as an IT specialist, I started from Safe mode and took driver by driver until it was sorted. Perhaps such a bottom up approach may assist you? Perhaps the Affinity guys could outline any other ideas other than conflicts, drivers, pen mode etc... that you can consider. Cheers, Paul. Link to comment Share on other sites More sharing options...
Rick G Posted December 19, 2017 Share Posted December 19, 2017 That is good advice Paul PaulAffinity 1 Affinity Designer 2.2.2075 & beta 2.3.1.2212 Affinity Photo 2.2.2075 beta 2.3.1.2212Affinity Publisher 2.2.2075 & beta 2.3.1.2212 Windows 11 Pro Version 22H2 OS build 22621.1928 Processor Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz 2.90 GHz Installed RAM 16.0 GB (15.7 GB usable) System type 64-bit operating system, x64-based processor Link to comment Share on other sites More sharing options...
Halo Posted December 19, 2017 Share Posted December 19, 2017 3 minutes ago, PaulAffinity said: While there may be some coding changes Affinity can receive I really am wondering how a crappy 6 year old underpowered laptop with win 7 and an old small Wacom works great and yours with beasts of machines do not? When I had issues, as an IT specialist, I started from Safe mode and took driver by driver until it was sorted. The problem is pretty sure a software / threading problem. Because the lag is creatly reduced when you close the history tab. I have tested it on three systems. And all have that problem (A Ryzen based AMD System with AMD Graphics, a Surface Pro 4 and my own PC). If you have a Mouse with a high polling rate you can also observe this behaviour easily - history tab open, make fast curves -> no smooth lines / "edgy". Close the history tab - problem greatly reduced. I think the app used the same Thread for undos and the event manager for input device listening. If you use Affinity Photo only for light retouch, then you might dont notice this. But if you draw, expecially fast curves, like hair, then it is really annoying. Rick G 1 Link to comment Share on other sites More sharing options...
Rick G Posted December 19, 2017 Share Posted December 19, 2017 2 minutes ago, Halo said: The problem is pretty sure a software / threading problem That would not be the first of that kind of issue. It seems you have reproduced it elsewhere too. I cannot reproduce it here. I kept adding layers and brush painting them with no change whether the history window was showing or not. IF I am missing steps, please advise and I will try to reproduce it Have you tried the infamous control start? It defaults to resetting 3 items but if that doesn't do it, reset everything and see if that helps. Things do go screwy in this program Affinity Designer 2.2.2075 & beta 2.3.1.2212 Affinity Photo 2.2.2075 beta 2.3.1.2212Affinity Publisher 2.2.2075 & beta 2.3.1.2212 Windows 11 Pro Version 22H2 OS build 22621.1928 Processor Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz 2.90 GHz Installed RAM 16.0 GB (15.7 GB usable) System type 64-bit operating system, x64-based processor Link to comment Share on other sites More sharing options...
Halo Posted December 19, 2017 Share Posted December 19, 2017 1 hour ago, Rick G said: IF I am missing steps, please advise and I will try to reproduce it 1.) Create a new empty document 2.) Turn off stabilizer 3.) Then paint FAST curves (half circle). You will notice that in the beginning of the curve, they are not round, rather straight. I have attached an example. Btw.: anyone else have problems with strange anti aliasing at uneven zoom levels? I cant remember that in PS, GIMP, Corel or others If you view that in image at 100%, you will see strange "ripples" in the lines. Nothing game breaking, but irritating interpolation. debraspicher 1 Link to comment Share on other sites More sharing options...
Rick G Posted December 19, 2017 Share Posted December 19, 2017 I am not getting that effect but ... DISCLAIMER .. I can't draw for sh*t anyway nevermind doing it fast. You half circles were something for me to aspire to. I hope someone jumps in here and tests it without my multi-thumb workflow issues Affinity Designer 2.2.2075 & beta 2.3.1.2212 Affinity Photo 2.2.2075 beta 2.3.1.2212Affinity Publisher 2.2.2075 & beta 2.3.1.2212 Windows 11 Pro Version 22H2 OS build 22621.1928 Processor Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz 2.90 GHz Installed RAM 16.0 GB (15.7 GB usable) System type 64-bit operating system, x64-based processor Link to comment Share on other sites More sharing options...
Gnobelix Posted December 19, 2017 Share Posted December 19, 2017 Hello Halo, so completely I do not understand the problem Well I'm not a graphic artist, for me are the drawn lines are OK, or do you mean the smoothing of the lines? see Screenshot. Image 2 is a 200% view Affinity Photo 2.4: Affinity Photo 1.10.6: Affinity Designer 2.4: Affinity Designer 1.10.6: Affinity Publisher 2.4: Affinity Publisher 1.10.6: Windows 11 Pro (Version 23H2 Build (22631.3527) Link to comment Share on other sites More sharing options...
Halo Posted December 19, 2017 Share Posted December 19, 2017 2 hours ago, Gnobelix said: Hello Halo, so completely I do not understand the problem Well I'm not a graphic artist, for me are the drawn lines are OK, or do you mean the smoothing of the lines? Thanks for the response. You must make that test with an active history tab and it must be in front. The other problem is with the anti aliasing on the screen, on uneven zoom levels. You can't see it every time - vary the zoom level a littel bit - but it's not my main concerns, only an information. Iam on vacation in the next weeks and can't respond to any replies, but i hope that a developer will look into these problems in the next year. Merry christmas to all. Link to comment Share on other sites More sharing options...
Rafal Posted December 20, 2017 Share Posted December 20, 2017 Hey Halo It is good someone else is also trying to get to Serif team with this problem. I kind of feel tired already of posting same thing and hear same respones over and over again. From me again, I checked drivers, did clean install for diffrent versions, check other software's (in terms of possible conflicts), reinstall windows (8.1), nothing helped. Interesting thing is that my Wacom works fine in PS, Krita, Gimp, Sai, Black ink, Inkscape... it is ONLY Affinity Photo that has this problem. I believe there is a certain line of Wacom small tablets that has this problem in AP. After all i could do on my PC i was pretty sure it is not anything wrong with it. As a last resort i installed my tablet on completaly different PC on win 7. All the softwares handled my wacom well on that PC expect AP, again. So after that i am pretty sure there is something wroing with AP and this certain line of Wacom tablets. For me disabeling history tab dosen't change a thing. If it does, it is nearly impossible to catch. Link to comment Share on other sites More sharing options...
Staff Chris J Posted December 20, 2017 Staff Share Posted December 20, 2017 Hi Halo, Thanks for the feedback. Be sure to check out the next beta as I have been working on improvements regarding straight lines on the tablet and the history tab. Cheers Chris altae, Gnobelix, Mark Ingram and 5 others 8 Link to comment Share on other sites More sharing options...
Gnobelix Posted December 20, 2017 Share Posted December 20, 2017 Hi Chris, That's good news, i hope that's not the only improvement. I am looking forward to the new beta. Best Regards Gnobelix Affinity Photo 2.4: Affinity Photo 1.10.6: Affinity Designer 2.4: Affinity Designer 1.10.6: Affinity Publisher 2.4: Affinity Publisher 1.10.6: Windows 11 Pro (Version 23H2 Build (22631.3527) Link to comment Share on other sites More sharing options...
Max N Posted December 20, 2017 Share Posted December 20, 2017 I would like to recall the problem with the Wacom tablet. The first time I reported it on June 9. The solution to the problem was not proposed. __________________ Windows 11 64-bit, AMD Ryzen 9 3900 + Nvidia 1660 Super + Nvidia Studio driver + 32 Gb RAM. Link to comment Share on other sites More sharing options...
Henry Stahle Posted December 21, 2017 Share Posted December 21, 2017 On 2017-12-19 at 6:21 PM, Halo said: 1.) Create a new empty document 2.) Turn off stabilizer 3.) Then paint FAST curves (half circle). You will notice that in the beginning of the curve, they are not round, rather straight. I have attached an example. I agree, I tested and confirm. By drawing slowly, the "corny" behaviour does not occur, only while making quick strokes. I tested the same in ClipStudio and SketchBook Pro. No such problems there. It's only in Affinity Photo and Designer. Link to comment Share on other sites More sharing options...
AsFrog Posted December 30, 2017 Share Posted December 30, 2017 Thanks for the new beta version. Now the brushes work much better, the stairs are gone and the productivity of the program has become much better when drawing. However, quickly calling the pipette on the alt still does not work well, sometimes it does not switch to the brush after removing the Alt key. Even when the atl is clamped, it would be nice if an icon of a pipette or a crosshair appeared instead of a brush, I like taping on the image to quickly take color and this would have made life much easier for me. I can also offer a good basic set of brushes for drawing: Basic Artistic Brush.afbrushes Link to comment Share on other sites More sharing options...
Rick G Posted December 30, 2017 Share Posted December 30, 2017 27 minutes ago, AsFrog said: Thanks for the new beta version. Now the brushes work much better, the stairs are gone and the productivity of the program has become much better when drawing. However, quickly calling the pipette on the alt still does not work well, sometimes it does not switch to the brush after removing the Alt key. Even when the atl is clamped, it would be nice if an icon of a pipette or a crosshair appeared instead of a brush, I like taping on the image to quickly take color and this would have made life much easier for me. I can also offer a good basic set of brushes for drawing: Basic Artistic Brush.afbrushes Thanks! Affinity Designer 2.2.2075 & beta 2.3.1.2212 Affinity Photo 2.2.2075 beta 2.3.1.2212Affinity Publisher 2.2.2075 & beta 2.3.1.2212 Windows 11 Pro Version 22H2 OS build 22621.1928 Processor Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz 2.90 GHz Installed RAM 16.0 GB (15.7 GB usable) System type 64-bit operating system, x64-based processor Link to comment Share on other sites More sharing options...
AsFrog Posted December 30, 2017 Share Posted December 30, 2017 On 19.12.2017 at 10:21 PM, Halo said: 1.) Create a new empty document 2.) Turn off stabilizer 3.) Then paint FAST curves (half circle). You will notice that in the beginning of the curve, they are not round, rather straight. I have attached an example. Btw.: anyone else have problems with strange anti aliasing at uneven zoom levels? I cant remember that in PS, GIMP, Corel or others If you view that in image at 100%, you will see strange "ripples" in the lines. Nothing game breaking, but irritating interpolation. Hi, Max. H! It's a strange thing, but I've come across a similar problem and understand you perfectly. Generally this problem appears randomly. Part of the problem can be solved if you include high-precision input from the tablet in the settings. Then the line will appear with a slight delay just equal to that gap when the stroke slows and draws a straight line. But then the heavier brushes will work much more slowly. I was helped to fix the problem by installing the program cleanly. I deleted it and using the program ccleaner cleaned unnecessary files and registry. After I re-installed the program and it helped me. Link to comment Share on other sites More sharing options...
Recommended Posts