Jump to content
You must now use your email address to sign in [click for more info] ×

Line Spacing


Recommended Posts

Well, you can adjust the leading: it is in the bottom left corner of the panel Positioning and Transform. It is called Leading Override. But you are right that is not easy to find it. Beside the choice of name (why don't you call it simply ‘leading’?) I think that the position of this command is wrong. The leading is often one of the commands you use the most, and it should be placed close to the type size (as in Indesign, Xpress, and older DP software).

947435321_ScreenShot2018-09-28at10_31_51.png.3e4ee715fb74c7bd010b8fc1ec16aad7.png

Link to comment
Share on other sites

In Affinity products leading is a paragraph attribute and therefore in the Paragraph panel and in the paragraph section of the text context toolbar. Setting leading once per paragraph should result in more consistent results.

What the Character panel has is something slightly different: it's a way to override the paragraph leading just for a few characters, usually to fix some problem such as a font having a different visual size.

Link to comment
Share on other sites

Riccard

7 hours ago, Riccardo O said:

Thanks. Now it is clear. I still think that having the leading command in a different panel than type size command is a waste of time for users. But if this is your policy throughout different pieces of software, I don't have much to say.

Riccardo

For information only, not intended to censure anybody

Line spacing or Leading (pronounced ledding, so called because the space between lines of text used to be set up by inserting strips of lead between lines of text in a printing press) has always been a property found in paragraph settings of all Microsoft text producing  products, Libre Office products, Scribus products, Only Office products, to name but a few, as well as Serif products, so it would appear to be a  common standard 

Pman

Link to comment
Share on other sites

16 hours ago, Jemez said:

I'm not seeing any way to adjust spacing between lines, only where to adjust character spacing.

 

8 hours ago, Dave Harris said:

In Affinity products leading is a paragraph attribute and therefore in the Paragraph panel and in the paragraph section of the text context toolbar. Setting leading once per paragraph should result in more consistent results.

What the Character panel has is something slightly different: it's a way to override the paragraph leading just for a few characters, usually to fix some problem such as a font having a different visual size.

Having explained historical reason that leading is in pagraph properties I meant to add this image just now to make it easier to locate the place to find line spacing on the Paragraph tab if Affinity Publisher.  You can either type a value into the box or click on the down arrow and select a value from the drop-down box

727038535_linespacing.PNG.89cb1fbcd4d41f5ba08e826c09e79992.PNG

Pman

 

Link to comment
Share on other sites

14 minutes ago, PMan said:

Line spacing or Leading (pronounced ledding, so called because the space between lines of text used to be set up by inserting strips of lead between lines of text in a printing press) has always been a property found in paragraph settings of all Microsoft text producing  products, Libre Office products, Scribus products, Only Office products, to name but a few, as well as Serif products, so it would appear to be a  common standard 

Messed up my head when I first started setting type. By Hand. I'd get the copy and be told to set it 12 on 14. Found out real quick that meant 12 point type plus 2 points leading not 12 plus 14 points leading. [retroactive-shame-face emoticon]

Mac Pro (Late 2013) Mac OS 12.7.4 
Affinity Designer 2.4.0 | Affinity Photo 2.4.0 | Affinity Publisher 2.4.0 | Beta versions as they appear.

I have never mastered color management, period, so I cannot help with that.

Link to comment
Share on other sites

 

3 hours ago, PMan said:

Hi Old Bruce

Bet you know why letters are known as Upper Case (capitals to novices) and Lower Case. Aah the good old days of setting by hand and being able to 'read' text as mirror image of outcome

Pman

Upside down and mirror image. I used the California cases, I think that is what they were called. You ever pie the type? Worse than composing was distributing the type.

Mac Pro (Late 2013) Mac OS 12.7.4 
Affinity Designer 2.4.0 | Affinity Photo 2.4.0 | Affinity Publisher 2.4.0 | Beta versions as they appear.

I have never mastered color management, period, so I cannot help with that.

Link to comment
Share on other sites

On 9/28/2018 at 1:26 PM, Old Bruce said:

Messed up my head when I first started setting type. By Hand. I'd get the copy and be told to set it 12 on 14. Found out real quick that meant 12 point type plus 2 points leading not 12 plus 14 points leading. [retroactive-shame-face emoticon]

Could have been worse. Could have been hot lead from a Linotype!

SDLeary

Link to comment
Share on other sites

On 9/28/2018 at 10:08 PM, PMan said:

Microsoft text producing  products, Libre Office products, Scribus products, Only Office products, to name but a few, as well as Serif products, so it would appear to be a  common standard 

Well, you listed products that are not what I consider standards for layout design. Are those the range of software among which Affinity Publisher should be placed, rather than Quark Xpress or Adobe Indesign?

Link to comment
Share on other sites

1 hour ago, SDLeary said:

Could have been hot lead from a Linotype!

That smell, that hot lead smell. It smells like victory.

Plus I don't surf.

Mac Pro (Late 2013) Mac OS 12.7.4 
Affinity Designer 2.4.0 | Affinity Photo 2.4.0 | Affinity Publisher 2.4.0 | Beta versions as they appear.

I have never mastered color management, period, so I cannot help with that.

Link to comment
Share on other sites

22 hours ago, Riccardo O said:

Well, you listed products that are not what I consider standards for layout design. Are those the range of software among which Affinity Publisher should be placed, rather than Quark Xpress or Adobe Indesign?

Ricardo O, 

Sorry if I didn't explain; my reply wasn't aimed at experts like yourself, but to assist newbies who may have never heard of Quark Express or Adobe's InDesign but have experience of word processing and want to try Desktop publishing for themselves. 

Here's a thought. If InDesign is so good why are there so many InDesign users complaining about Publisher not working like InDesign does. Can you remember 15 years back when it was introduced?  (and it wasn't completely new but based on years of development in Adobe Page maker). Could it do as well then as Publisher Beta does at the moment? 

Sometimes we mere mortals can only ask for improvements/make suggestions/report bugs to Serif the backroom boys and hope that they can develop the complex code to provide what we'd like. 

I don't know where Publisher is aiming to position itself that is for Serif to decide

Respectfully

Pman

Link to comment
Share on other sites

12 hours ago, PMan said:

I don't know where Publisher is aiming to position itself that is for Serif to decide

I do hope that Serif wants to position it within the desktop publishing software, because I cannot see any need for new word processors, while there is need of a lighter and cheaper piece of software than Indesign. Most of the functions I've seen in Publisher seems to point toward this directions.

For this reason I insist that keeping leading in a different panel that the type size is a mistake.

If you design a layout (unlike if you set a plain text) changing leading is one of the actions you do the most. The way MS Word and other word processors handle leading (as much as many other things, as the OT feature) is simply ridiculous. They were designed by people who had never designed a layout.

Link to comment
Share on other sites

1 hour ago, Riccardo O said:

changing leading is one of the actions you do the most

(But the leading should not be determined by changing it often / by trial and error, but based on a professional layout grid concept that takes into account, for example, image size and readability.)

Link to comment
Share on other sites

3 minutes ago, Oval said:

(But the leading should not be determined by changing it often / by trial and error, but based on a professional layout grid concept that takes into account, for example, image size and readability.) 

This is the way layout is seen in the traditional Swiss school, but it is a bit over nowadays. It is generally considered too strict. I personally love grids, but that is another matter.

The point is that graphic designers usually need to test and try (rather than design out of the blue following prefixed rules) and to test and try layout configurations you often need to play with leading.

Link to comment
Share on other sites

4 hours ago, Riccardo O said:

I do hope that Serif wants to position it within the desktop publishing software, because I cannot see any need for new word processors, while there is need of a lighter and cheaper piece of software than Indesign. Most of the functions I've seen in Publisher seems to point toward this directions.

For this reason I insist that keeping leading in a different panel that the type size is a mistake.

If you design a layout (unlike if you set a plain text) changing leading is one of the actions you do the most. The way MS Word and other word processors handle leading (as much as many other things, as the OT feature) is simply ridiculous. They were designed by people who had never designed a layout.

Are you aware that leading is also found in the text context toolbar, at the top of the view? So like pointsize it is always available whatever panels you have visible.

Paragraph leading in InDesign is very limited, so it doesn't get used much and everyone sets leading on characters instead. We feel that is less good typographically. Leading should really be a property of the entire paragraph, and therefore logically should be in the Paragraph panel.

Link to comment
Share on other sites

2 minutes ago, Dave Harris said:

...

Paragraph leading in InDesign is very limited, so it doesn't get used much and everyone sets leading on characters instead. We feel that is less good typographically. Leading should really be a property of the entire paragraph, and therefore logically should be in the Paragraph panel.

Really? I think I can count on one hand the times leading has been overridden for the files I have received (and I really never do). That's going back to v.2 of ID. The few times I have found it, only once was it appropriate for the paragraph I found it in.

But yes, unless there is a really good reason to, leading should be used as part of a p.style.

Link to comment
Share on other sites

1 hour ago, Dave Harris said:

Are you aware that leading is also found in the text context toolbar, at the top of the view? So like pointsize it is always available whatever panels you have visible. 

No, I did not realise it. So, my complaining is pointless. 
Thanks

Link to comment
Share on other sites

2 hours ago, Dave Harris said:

Are you aware that leading is also found in the text context toolbar, at the top of the view? So like pointsize it is always available whatever panels you have visible.

Paragraph leading in InDesign is very limited, so it doesn't get used much and everyone sets leading on characters instead. We feel that is less good typographically. Leading should really be a property of the entire paragraph, and therefore logically should be in the Paragraph panel.

Thanks Dave,

That's the beauty of forums!  Someone points out the obvious which so often we users overlook.  I had overlooked the leading control  in the text panel even when I set columns in the text panel and columns setting is right beside it. So much easier than going to Paragraph in Studio tabs and setting leading there, though of course there are other paragraph controls in Studio such as first line indent, left and right indents which a user  might be wanting to set at the same time.

Pman

Link to comment
Share on other sites

  • 2 weeks later...

Putting this here as it's related.

Whenever I create a new document and put a text frame on it, there is always 12pt spacing after each paragraph. This means I have to change this every single time which gets very wearing. Can this be stopped?

 

Also, can you set a default font, point size and leading for new text frames within Preferences so it is the same for every new document?

 

Screen Shot 2018-10-11 at 15.45.16.jpg

He never fails to achieve new heights in being stupid...

Link to comment
Share on other sites

4 minutes ago, bbwd said:

Putting this here as it's related.

Whenever I create a new document and put a text frame on it, there is always 12pt spacing after each paragraph. This means I have to change this every single time which gets very wearing. Can this be stopped?

 

Also, can you set a default font, point size and leading for new text frames within Preferences so it is the same for every new document?

Set the defaults how you want them and then use Edit > Defaults > Save.

Link to comment
Share on other sites

5 minutes ago, Dave Harris said:

Set the defaults how you want them and then use Edit > Defaults > Save.

So I have to create a new document, set the font, point size and leading within a text frame and then use Edit ▸ Defaults ▸ Save?

He never fails to achieve new heights in being stupid...

Link to comment
Share on other sites

55 minutes ago, bbwd said:

So I have to create a new document, set the font, point size and leading within a text frame and then use Edit ▸ Defaults ▸ Save?

Once.

Mac Pro (Late 2013) Mac OS 12.7.4 
Affinity Designer 2.4.0 | Affinity Photo 2.4.0 | Affinity Publisher 2.4.0 | Beta versions as they appear.

I have never mastered color management, period, so I cannot help with that.

Link to comment
Share on other sites

5 hours ago, bbwd said:

So I have to create a new document, set the font, point size and leading within a text frame and then use Edit ▸ Defaults ▸ Save?

Yes. And set Space After to zero. Art text has different defaults to Frame text, so you may want to set the font and leading for that, too.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use | Privacy Policy | Guidelines | We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.