
Nashorn
-
Posts
126 -
Joined
-
Last visited
Reputation Activity
-
Nashorn reacted to R C-R in Welche Endungen haben Vorlagen vom Publisher auf MacOS?
*.aftemplate
They are put in whatever folder(s) you have chosen for them.
-
Nashorn reacted to walt.farrell in Wie exportiere ich ein png mit transparenten Teilen aus Photo2?
Make sure your Publisher document is set to have a Transparent Background. This will be in Document Settings, in the Color tab.
-
Nashorn reacted to joe_l in Wie exportiere ich ein png mit transparenten Teilen aus Photo2?
Ups. Übersehen. Es ist so, wie du gesagt hast. Entweder Füllung auf Transparent setzen oder den von dir erwähnten Button anklicken. 👍
-
Nashorn reacted to NotMyFault in Wie exportiere ich ein png mit transparenten Teilen aus Photo2?
https://affinity.help/publisher2/de.lproj/pages/ObjectControl/objectDefaults.html
Klicken Sie im Menü Bearbeiten auf Standardwerte und dann auf Auf Installationswerte zurücksetzen.
Ist aktuell ein Objekt ausgewählt, werden seine Attribute auf die Standardeinstellungen zurückgesetzt.
-
Nashorn reacted to thomaso in Wie exportiere ich ein png mit transparenten Teilen aus Photo2?
Tatsächlich verwirrend. Zur Aufklärung wäre es aber nötig, alle Parameter dieses Objects zu anzusehen, besonders in der Ebenen-Palette. Vielleicht ist zusätzlich eine Maske auf das Personen-Bild angewendet, oder eine modifizierte Überblend-Optionen Kurve, oder …?
(p.s.: ich habe nur V1 und kann dein .afpub nicht selbst inspizieren)
-
Nashorn got a reaction from mopperle in Wie exportiere ich ein png mit transparenten Teilen aus Photo2?
DAS WAR DAS PROBLEM !!!
Vielen, vielen Dank für eure Mühen und eure Hartnäckigkeit.
Es ist mir etwas peinlich, dass ich so lang gebraucht habe, bis der Groschen fiel.
Ich erstelle seit 16 Jahren für meine Enkel zum Geburtstag Fotobücher. Nach vielen Versuchen mit diversen Programmen benutze ich den Publisher, seit es ihn gibt. Ich habe schon oft mit Transparenzen gearbeitet, es ging immer wie von alleine. Dieses Mal hat es zum ersten Mal nicht auf Anhieb geklappt.
Hier ein kleines, für mein Empfinden recht gutes Beispiel, bei dem es mir gelungen ist, die Beschränkungen durch das Buchformat zugunsten des Fotos auszutricksen. 🙃
Liebe Grüße
-
Nashorn got a reaction from joe_l in Wie exportiere ich ein png mit transparenten Teilen aus Photo2?
DAS WAR DAS PROBLEM !!!
Vielen, vielen Dank für eure Mühen und eure Hartnäckigkeit.
Es ist mir etwas peinlich, dass ich so lang gebraucht habe, bis der Groschen fiel.
Ich erstelle seit 16 Jahren für meine Enkel zum Geburtstag Fotobücher. Nach vielen Versuchen mit diversen Programmen benutze ich den Publisher, seit es ihn gibt. Ich habe schon oft mit Transparenzen gearbeitet, es ging immer wie von alleine. Dieses Mal hat es zum ersten Mal nicht auf Anhieb geklappt.
Hier ein kleines, für mein Empfinden recht gutes Beispiel, bei dem es mir gelungen ist, die Beschränkungen durch das Buchformat zugunsten des Fotos auszutricksen. 🙃
Liebe Grüße
-
Nashorn got a reaction from NotMyFault in Wie exportiere ich ein png mit transparenten Teilen aus Photo2?
DAS WAR DAS PROBLEM !!!
Vielen, vielen Dank für eure Mühen und eure Hartnäckigkeit.
Es ist mir etwas peinlich, dass ich so lang gebraucht habe, bis der Groschen fiel.
Ich erstelle seit 16 Jahren für meine Enkel zum Geburtstag Fotobücher. Nach vielen Versuchen mit diversen Programmen benutze ich den Publisher, seit es ihn gibt. Ich habe schon oft mit Transparenzen gearbeitet, es ging immer wie von alleine. Dieses Mal hat es zum ersten Mal nicht auf Anhieb geklappt.
Hier ein kleines, für mein Empfinden recht gutes Beispiel, bei dem es mir gelungen ist, die Beschränkungen durch das Buchformat zugunsten des Fotos auszutricksen. 🙃
Liebe Grüße
-
Nashorn got a reaction from Nils Sens in How do I get the original size of my page on the screen?
How can I set the screen display of a page to the original size in Publisher 1.10.4?
My project has a page size of 39.0 x 19.5 cm.
If I choose the setting View> Zoom> Actual size, the publisher shows me 46.0 x 23.0, with Zoom> 100% also 46.0 x 23.0
and with Zoom> appropriate zooming 45.0 x 22.5.
Has a bug crept into the new version?
How do I get the original size?
-
Nashorn got a reaction from thomaso in Der Publisher bringt mich zur Verzweiflung - wie komme ich an mein Buch?
Danke tomaso,
das war eine große Hilfe! Es handelte sich um ein abgelöstes Dokumentfenster. Das kannte ich noch nicht.
Ich konnte es einfach auf den zweiten Monitor verschieben und die darunter liegenden Dokumente schließen.
Ich weiß nicht mehr genau wie es dann passiert ist, aber dieses schwebende Fenster ist inzwischen nicht mehr aufgetaucht.
I am happy! 🙂
-
Nashorn got a reaction from Dan C in Eigenes neues Dokument als Preset sichern
Vielen Dank! Wirklich sehr einfach! 😀
-
Nashorn got a reaction from Old Bruce in Publisher wish: Easy way to identify used images, files
Thanks for your tips.
After I wrote down my frustration here, I thought again and looked at the functions in the resources.
I used the help for the "collect resources" function and found the solution there. I copied all the images used into a folder and then archived it.
There is already a solution to my problem. Now I have found her. Many Thanks!!!
-
Nashorn got a reaction from PaoloT in Publisher wish: Easy way to identify used images, files
I wish for some relief for a dull work!
I create photo books with the publisher. I do this by going through my image collection and copying the best photos I could use into a folder. But in the end I only use a quarter of the pictures.
Once the book is printed, I archive the publisher files, the PDF for printing, and the folder containing the images used. But I have to sort out the unused pictures first.
This work is very annoying:
I take the resource list, click "Show in Finder" for each image used and color-code the image. With 200 or more images, this takes more than an hour. Then all unmarked images will be deleted and then the image folder can finally be archived.
Is there a smarter faster solution for this?
-
Nashorn got a reaction from walt.farrell in Where can I find my studio's layers in Affinity Photo?
Dear Walt!
Thanks a lot for your quick help. But I solved the problem differently. I just restarted my Mac.
I believe the fault lies with the new Ventura operating system. Similar errors happen in other programs as well.
After that everything was back to normal. I was probably too early with the update.
🙏🙂
-
Nashorn got a reaction from thomaso in Strange publisher when creating a picture frame
Whoa! I didn't know about this function. After that, creating picture frames and inserting pictures works again. Excellent! Thanks very much, Thomaso!
One more question: What is the reason for the strange behavior of the designer?
-
Nashorn reacted to thomaso in Strange publisher when creating a picture frame
Another trial:
1. Close the affected document.
2. Create a new document of same dimensions, resolution, colour profile.
3. Select menu Document > Add Pages from File…
4. Choose the affected document to get its pages imported this way.
5. Try if the issue with new picture frames still happens.
-
Nashorn got a reaction from joe_l in Resource Manager does not display image. Is this a problem?
Convert to Image Resource is grey, I cannot select it.
But your tip gave me another idea:
I replaced the image with itself. Just reloaded it from my images folder. Now the resource manager recognizes it.
Thank you! 😄
-
Nashorn got a reaction from Old Bruce in How do I make a path invisible after creating text for it?
Yes! That's the way to hide the path! That you very much!
😀
-
Nashorn reacted to Old Bruce in How do I make a path invisible after creating text for it?
Is this in Publisher or Photo or Designer?
In Designer and Photo the stroke for the path / curve disappears as soon as the text is started.
With Publisher it can remain, you access the properties for the path / curve by using the Text Frame panel. Those are separate from the properties for the text.
Here is what I see in Designer; notice how the path is gone when not selected.
-
Nashorn reacted to MEB in renamne projects when working with multiple projects at once
Not at all, I understand where are you coming from/why you tried to do that - there's other native mac apps where you can do it but Affinity apps don't support this.
-
Nashorn got a reaction from thomaso in How do I get the original size of my page on the screen?
Thank you, thomaso, for the tip. I set the zoom level to 85% and now the display is perfect.
I didn't know the setting via the navigator yet. So far it has always worked 100% for me.
However, I recently lowered the resolution on my MacBook. The standard resolution was just too tiny for me. My external monitor can only support HD, but one eye can no longer either 🙂.
Danke an alle! Eure Beiträge waren sehr hilfreich und ermutigend. 🙃
-
Nashorn reacted to walt.farrell in How do I get the original size of my page on the screen?
What OS do you use? What monitor, and are you applying any display scaling?
View > Zoom > 100% is exact for my monitor on my Windows laptop with the recommended 125% display scaling. View > Zoom > Actual Size also works.
-
Nashorn reacted to iconoclast in How do I get the original size of my page on the screen?
Or Ctrl+1 or doubleclick the magnifier tool.
-
Nashorn reacted to Alfred in How do I get the original size of my page on the screen?
This is nothing new. It’s a very long-standing bug, unfortunately.
-
Nashorn reacted to thomaso in How do I get the original size of my page on the screen?
As far I understand you use the macbook + an additional / external monitor. Affinity will know & respect the resolution of your internal macbook screen, I assume if you display your document on this screen then the 1:1 view scaling works as expected.
The reason for your issue lies in the different physical pixel size and density of your two screens, so even in an identical resolution setting they can result in different dimensions. Probably the pixels of your macbook screen are smaller than those of the Dell monitor, at least they both vary slightly in their physical size. Therefore the 1:1 view does not work on both screens but likely does for the macbook because this is the main screen which is used first when you boot the mac.
One workaround could be as you started already: Create in Affinity an object in a common size, e.g. a square with 10 x 10 cm or a page in DIN A5 and create an according piece of paper in same size and tape it on your screen (may be easier to handle than your physical ruler). Then adjust the zoom level in Affinity to make the object on screen exactly "cover" the real object's size. If they are congruent you know the required zoom level for this monitor (in its current resolution). For future use in 1:1 view you can use the Navigator panel to set the according zoom level.
The weird subdivisons of the Affinity ruler is a different issue, as @Alfred mentioned already. It is not at all influencing the 1:1 issue of your external monitor and affects everybody of us, regardless of our hardware.