lphilpot Posted November 9, 2022 Share Posted November 9, 2022 Apologies in advance if this has been answered, but I scanned the topics and didn't see it. Is there a way to migrate my v1 Photo preferences to v2? I realize they're not identical (obviously!) but unless it would be detrimental, migrating my prefs and saved Studio presets would be a nice jump start (at a minimum). I don't plan on keeping v1 once I'm comfortable with 2. Thanks! Quote Len Affinity Photo 2 | QCAD 3 | FastStone | SpyderX Pro | FOSS: ART darktable XnView RawTherapee Inkscape G'MIC LibreOffice Windows 11 on a 16 GB, Ryzen 5700 8-core laptop with a cheesy little embedded AMD GPU Canon T8i / 850D | Canon EF 24-70mm F4L IS USM | Canon EF 70-200mm F4 L USM | Rikenon P 50mm f/1.7 | K&F Concept Nano-X filters ...desperately looking for landscapes in Nolandscapeland https://www.flickr.com/photos/14015058@N07/ Link to comment Share on other sites More sharing options...
3joern Posted November 9, 2022 Share Posted November 9, 2022 I'am also very interested in this topic. I tried to copy the preset folder from V1 to V2, but it doesn't work. The safed studio is visible in v2, but if I select it, nothing happens. It's crucial for me to have the same tool on the same place and all do it new by hand would be very time consuming on all 3 Apps. Quote Link to comment Share on other sites More sharing options...
Staff Dan C Posted November 9, 2022 Staff Share Posted November 9, 2022 Hi @lphilpot & @3joern, I can confirm that due to the overhaul of the UI in V2, the Studio Presets from V1 aren't compatible - unfortunately you will need to manually create new Studio Presets in V2. However, Keyboard Shortcuts can be exported from the Preferences dialog in V1, then imported into V2 as required. I hope this helps Quote Please note - I am currently out of the office for a short while whilst recovering from surgery (nothing serious!), therefore will not be available on the Forums during this time. Should you require a response from the team in a thread I have previously replied in - please Create a New Thread and our team will be sure to reply as soon as possible. Many thanks! Link to comment Share on other sites More sharing options...
lphilpot Posted November 9, 2022 Author Share Posted November 9, 2022 I put 1 on my left monitor, 2 on my right and it only took a few minutes to reconfigure 2. To be clear, I'm a Photo-only user and had only one default Studio Preset. But a migration ability of some sort would certainly be a benefit to others, I'm sure. One thing that would be nice in regard to Studio Presets is the ability to simply save the currently active preset, instead of having to "create" it anew each time and overwrite the existing Preset. Just add a "Save preset" choice to the menu. Thanks. Dan C 1 Quote Len Affinity Photo 2 | QCAD 3 | FastStone | SpyderX Pro | FOSS: ART darktable XnView RawTherapee Inkscape G'MIC LibreOffice Windows 11 on a 16 GB, Ryzen 5700 8-core laptop with a cheesy little embedded AMD GPU Canon T8i / 850D | Canon EF 24-70mm F4L IS USM | Canon EF 70-200mm F4 L USM | Rikenon P 50mm f/1.7 | K&F Concept Nano-X filters ...desperately looking for landscapes in Nolandscapeland https://www.flickr.com/photos/14015058@N07/ Link to comment Share on other sites More sharing options...
R C-R Posted November 10, 2022 Share Posted November 10, 2022 6 hours ago, lphilpot said: One thing that would be nice in regard to Studio Presets is the ability to simply save the currently active preset, instead of having to "create" it anew each time and overwrite the existing Preset. Just add a "Save preset" choice to the menu. Can't you do that via Window > Studio > Add Preset...? You just have to set up everything however you want, click that, & give the preset a name. Quote All 3 1.10.8, & all 3 V2.4.1 Mac apps; 2020 iMac 27"; 3.8GHz i7, Radeon Pro 5700, 32GB RAM; macOS 10.15.7 Affinity Photo 1.10.8; Affinity Designer 1.108; & all 3 V2 apps for iPad; 6th Generation iPad 32 GB; Apple Pencil; iPadOS 15.7 Link to comment Share on other sites More sharing options...
lphilpot Posted November 10, 2022 Author Share Posted November 10, 2022 6 minutes ago, R C-R said: Can't you do that via Window > Studio > Add Preset...? You just have to set up everything however you want, click that, & give the preset a name. Yes, that's what I do. But if I later go back and tweak my setup, in order to save it I have to retype the name of the Preset exactly the same and tell Photo to overwrite it. Having a vanilla "save" choice that assumes the current setup / preset name and doesn't prompt would be nice. IOW, assume I want to save / overwrite just like in any word processor, spreadsheet, etc., when Save is chosen (not Save As). Quote Len Affinity Photo 2 | QCAD 3 | FastStone | SpyderX Pro | FOSS: ART darktable XnView RawTherapee Inkscape G'MIC LibreOffice Windows 11 on a 16 GB, Ryzen 5700 8-core laptop with a cheesy little embedded AMD GPU Canon T8i / 850D | Canon EF 24-70mm F4L IS USM | Canon EF 70-200mm F4 L USM | Rikenon P 50mm f/1.7 | K&F Concept Nano-X filters ...desperately looking for landscapes in Nolandscapeland https://www.flickr.com/photos/14015058@N07/ Link to comment Share on other sites More sharing options...
Johannes Posted November 10, 2022 Share Posted November 10, 2022 I will make screenshots from my 2 displays for Studio panels left and right from center canvas display for each app and two times more for the Studios from Studio Link. That makes 8 displays to fill with single Studio windows in the place where I used to find them. In the past I did all that twice for Seperated Mode – and very often in times of Studio presets yet to come. Three-display-setups can mess this stuff up on a regular basis. I will see how that goes with v2 and Float View to Window. *sigh🤷♂️ Quote Advertising designer - Austria — Photo - Publisher - Designer — CS6 d&wP — Mac Pro 5,1 (4,1 2009) 48GB 2x X5690 - RX580 - 970EVO - OS X 10.14.6 - NEC2690wuxi2 - CD20"— iPad Pro 12.9" gen1 128 GB - Pencil Link to comment Share on other sites More sharing options...
Johannes Posted November 10, 2022 Share Posted November 10, 2022 17 hours ago, lphilpot said: Yes, that's what I do. But if I later go back and tweak my setup, in order to save it I have to retype the name of the Preset exactly the same and tell Photo to overwrite it. Having a vanilla "save" choice that assumes the current setup / preset name and doesn't prompt would be nice. IOW, assume I want to save / overwrite just like in any word processor, spreadsheet, etc., when Save is chosen (not Save As). In that case I used to copy the name from the Rename feature inside Studio Presets Manager. 🤷♂️ Quote Advertising designer - Austria — Photo - Publisher - Designer — CS6 d&wP — Mac Pro 5,1 (4,1 2009) 48GB 2x X5690 - RX580 - 970EVO - OS X 10.14.6 - NEC2690wuxi2 - CD20"— iPad Pro 12.9" gen1 128 GB - Pencil Link to comment Share on other sites More sharing options...
Haitch Posted December 14, 2023 Share Posted December 14, 2023 On 11/9/2022 at 5:00 PM, Dan C said: Hi @lphilpot & @3joern, I can confirm that due to the overhaul of the UI in V2, the Studio Presets from V1 aren't compatible - unfortunately you will need to manually create new Studio Presets in V2. However, Keyboard Shortcuts can be exported from the Preferences dialog in V1, then imported into V2 as required. I hope this helps I find this almost unbelievable. Those presets represent a lot of work. Could you not have warned us of this before updating? We could at least have made notes to help recreate them. Quote Link to comment Share on other sites More sharing options...
walt.farrell Posted December 14, 2023 Share Posted December 14, 2023 30 minutes ago, Haitch said: I find this almost unbelievable. Those presets represent a lot of work. Could you not have warned us of this before updating? We could at least have made notes to help recreate them. Installing V2 does not uninstall V1, so you should still be able to run it and take those notes. R C-R 1 Quote -- Walt Designer, Photo, and Publisher V1 and V2 at latest retail and beta releases PC: Desktop: Windows 11 Pro, version 23H2, 64GB memory, AMD Ryzen 9 5900 12-Core @ 3.00 GHz, NVIDIA GeForce RTX 3090 Laptop: Windows 11 Pro, version 23H2, 32GB memory, Intel Core i7-10750H @ 2.60GHz, Intel UHD Graphics Comet Lake GT2 and NVIDIA GeForce RTX 3070 Laptop GPU. iPad: iPad Pro M1, 12.9": iPadOS 17.4.1, Apple Pencil 2, Magic Keyboard Mac: 2023 M2 MacBook Air 15", 16GB memory, macOS Sonoma 14.4.1 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.