PaulD Posted February 9, 2020 Share Posted February 9, 2020 <split by mod from this generic thread> On 7/1/2019 at 4:36 PM, Patrick Connor said: The changes were reasonably subtle. Follwoing the instructions in the previous reprint of the book still works. It's really not something that needs too much attention, we just checked that it could be followed in 1.7 and 98% of it could and the last 2% was tweaked. Also, apparently the content that you can download is unchanged so one or 2 of the files contain a legacy adjustment settings!! I hope this is addressed at somepoint but AFAIK this work is still pending for the downloadable content. Hi Patrick C- Just want to comment on the 2% 'tweak'. As a newbe using the Book to learn the AP app, the 2% is a problem. If you are trying to problem-solve an issue while working a project it comes down to guess work... is it me or a change in product behavior? I spent hours and extensive conversations before it was explained that the Text Layer cannot be chosen when Placing the Texture.jpg on the layer e.g. Search The Woods (Adding Texture)exercise. Other examples of confusion include- Layer>Duplicate vs Layer>Duplicate Selection and Edit>Fill vs Edit>Fill with Primary Color as directed in the Puregold exercise. An experienced user may know intuitively if these choices are decisive in the behavior of the Workbook narrative. A new user can only guess. This being said, I am deeply impressed with the AP product and the Workbook content. I have learned a lot a have gained a great appreciation for the product and the skills required to to be an accomplished user. Thanks- Quote Link to comment Share on other sites More sharing options...
Staff Sean P Posted February 11, 2020 Staff Share Posted February 11, 2020 Hi PaulD, Those passages/examples have not changed in the reprint and don't refer to the 2% tweaks to the reprinted book that Patrick was referring to. With that said the Search the Woods topic can definitely be improved to suggest to ensure a text frame is not selected (this was a change that was introduced in Publisher, that had a knock on effect to Photo). I will get this passed on to the documentation team. The other two points you mention are still correct and can still be followed, they're just two additional options that were added during development, however they don't invalidate the steps in the book, the book will still give the correct results. With that said if you do have any suggestions for changes that could improve the usability of the book then please do make a new thread! Quote Link to comment Share on other sites More sharing options...
PaulD Posted February 11, 2020 Author Share Posted February 11, 2020 Hi Sean P, Thanks for your reply. I surmised the additions were options... but when things fail...I look for the 'outliers'. Thanks again Quote Link to comment Share on other sites More sharing options...
PaulD Posted February 11, 2020 Author Share Posted February 11, 2020 Found I had to select Background and Mask to Rasterze to single layer. Same result when try to Paint back smudge however...nothing happens. Try screen shot again. If it works 2-11-8:47 is 1280x1280 and 'Choose from files' vs drag and drop. Quote Link to comment Share on other sites More sharing options...
walt.farrell Posted February 11, 2020 Share Posted February 11, 2020 Perhaps you have changed some of the Photo settings (Preferences, or Assistant) from their defaults? The workbooks assume everything is default. You might consider creating another user on your system, and using it for the workbook projects so you have default settings. Quote -- Walt Designer, Photo, and Publisher V1 and V2 at latest retail and beta releases PC: Desktop: Windows 11 Pro 23H2, 64GB memory, AMD Ryzen 9 5900 12-Core @ 3.00 GHz, NVIDIA GeForce RTX 3090 Laptop: Windows 11 Pro 23H2, 32GB memory, Intel Core i7-10750H @ 2.60GHz, Intel UHD Graphics Comet Lake GT2 and NVIDIA GeForce RTX 3070 Laptop GPU. Laptop 2: Windows 11 Pro 24H2, 16GB memory, Snapdragon(R) X Elite - X1E80100 - Qualcomm(R) Oryon(TM) 12 Core CPU 4.01 GHz, Qualcomm(R) Adreno(TM) X1-85 GPU iPad: iPad Pro M1, 12.9": iPadOS 17.7, Apple Pencil 2, Magic Keyboard Mac: 2023 M2 MacBook Air 15", 16GB memory, macOS Sonoma 14.7 Link to comment Share on other sites More sharing options...
Cecil Posted February 11, 2020 Share Posted February 11, 2020 @PaulD Page 84 provides instructions to reset your workspace to the default factory-supplied layout, if in doubt or don’t consider creating another user account. Quote Cecil iMac Retina 5K, 27”, 2019. 3.6 GHz Intel Core 9, 40 GB Memory DDR4, Radeon Pro 580X 8 GB, macOS,iPad Pro iPadOS Continuous improvement is better than delayed perfection Link to comment Share on other sites More sharing options...
PaulD Posted February 12, 2020 Author Share Posted February 12, 2020 I will reset to factory defaults and see what results. Thanks for your response Quote Link to comment Share on other sites More sharing options...
PaulD Posted February 12, 2020 Author Share Posted February 12, 2020 On 2/11/2020 at 5:19 PM, walt.farrell said: Perhaps you have changed some of the Photo settings (Preferences, or Assistant) from their defaults? The workbooks assume everything is default. You might consider creating another user on your system, and using it for the workbook projects so you have default settings. Thanks for your response will reset and try again. Quote Link to comment Share on other sites More sharing options...
walt.farrell Posted February 13, 2020 Share Posted February 13, 2020 You're welcome. Quote -- Walt Designer, Photo, and Publisher V1 and V2 at latest retail and beta releases PC: Desktop: Windows 11 Pro 23H2, 64GB memory, AMD Ryzen 9 5900 12-Core @ 3.00 GHz, NVIDIA GeForce RTX 3090 Laptop: Windows 11 Pro 23H2, 32GB memory, Intel Core i7-10750H @ 2.60GHz, Intel UHD Graphics Comet Lake GT2 and NVIDIA GeForce RTX 3070 Laptop GPU. Laptop 2: Windows 11 Pro 24H2, 16GB memory, Snapdragon(R) X Elite - X1E80100 - Qualcomm(R) Oryon(TM) 12 Core CPU 4.01 GHz, Qualcomm(R) Adreno(TM) X1-85 GPU iPad: iPad Pro M1, 12.9": iPadOS 17.7, Apple Pencil 2, Magic Keyboard Mac: 2023 M2 MacBook Air 15", 16GB memory, macOS Sonoma 14.7 Link to comment Share on other sites More sharing options...
PaulD Posted February 13, 2020 Author Share Posted February 13, 2020 OK Reset per instructions...noticed brushes and Refine specs where left as previously set in book? Cutout Screen Shot 19.19- Created Mask from Refine dialog. To rasterize, I moved mask to under background and selected both layers. Smudge Screen Shot 5.41- Followed instructions... OK? Disintegrate Screen Shot 2.36 Steps1 thru 5-. Mask layer created (from layers panel)but no layer selected automatically. Had to select both layers before Edit>Fill worked.(There is no 'Apply' button as Book indicated.) Worked correctly Screen Shot 9.04 ScreenShot 1.49 Step 6- White Swatch Selected, Paint Brush selected.... doesn't work? Patrick Connor 1 Quote Link to comment Share on other sites More sharing options...
PaulD Posted February 13, 2020 Author Share Posted February 13, 2020 Learn something every day... screen shots do not carry date, or deliver in order selected...hope you can sort it out Quote Link to comment Share on other sites More sharing options...
Staff Patrick Connor Posted February 13, 2020 Staff Share Posted February 13, 2020 Thanks for all the extra information @PaulD I have split this workbook problem off into it's own thread. I am sure @Sean P will get back to you soon. Quote Patrick Connor Serif Europe Ltd Latest V2 releases on each platform Help make our apps better by joining our beta program! "There is nothing noble in being superior to your fellow man. True nobility lies in being superior to your previous self." W. L. Sheldon Link to comment Share on other sites More sharing options...
PaulD Posted February 13, 2020 Author Share Posted February 13, 2020 Hi Patrick C- I am successful with 1280x1280 she and using 'Choose Files' vs 'drag and Drop'. Not sure whether Dag and Drop will work with new size. Thanks for your follow-up-. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.