William Cartwright Posted May 19, 2017 Share Posted May 19, 2017 First, I'm absolutely loving Designer. I've been a pretty advanced pixel editor using PS for decades (and now a fan of AP), but—aside from a few typographic elements—I always felt incompetent with Illustrator. In contrast, I use Designer all the time and love it. One (newbie) problem I had recently occurred when designing a T-shirt for the youth Lacrosse team I coach to commemorate their (improbable, but well-earned) undefeated season. I had a lot of layers in the design and found that when I created a new "Text layer" that as soon as I tried to type in the new layer the selected layer would change to a different layer. I used different workarounds, including turning off overlapping layers and even composing new text layers in a seperate document a pasting them in, but I assume there is a better way to force text onto a new text layer rather than having the selected layer switch to a different (overlapping) layer? Appreciate the help. Bill Quote Link to comment Share on other sites More sharing options...
Staff Callum Posted May 19, 2017 Staff Share Posted May 19, 2017 Hi William Cartwright, I'm not sure if I understand your issue exactly. Do you have the Text Tool selected when you try and type in your text boxes? C Quote Please tag me using @ in your reply so I can be sure to respond ASAP. Link to comment Share on other sites More sharing options...
William Cartwright Posted May 19, 2017 Author Share Posted May 19, 2017 Hi William Cartwright, I'm not sure if I understand your issue exactly. Do you have the Text Tool selected when you try and type in your text boxes? C Yes, I have the text tool selected. However if there is (for example) a large design element under where I hope to add new text, once I click on the document the layer switches to an "underneath" layer. I hope that's clear. Quote Link to comment Share on other sites More sharing options...
gdenby Posted May 19, 2017 Share Posted May 19, 2017 Are you perhaps clicking on a portion of the underlying design, and not within the text frame? In Preferences/User Interface, is "Show Selection in Layers Panel" checked? That way, you will know if the text panel layer and not something else has been clicked. Quote iMac 27" Retina, c. 2015: OS X 10.11.5: 3.3 GHz I c-5: 32 Gb, AMD Radeon R9 M290 2048 Mb iPad 12.9" Retina, iOS 10, 512 Gb, Apple pencil Huion WH1409 tablet Link to comment Share on other sites More sharing options...
William Cartwright Posted May 19, 2017 Author Share Posted May 19, 2017 Are you perhaps clicking on a portion of the underlying design, and not within the text frame? In Preferences/User Interface, is "Show Selection in Layers Panel" checked? That way, you will know if the text panel layer and not something else has been clicked. I did not have the "Show Selection in Layers" preference selected, but the change has not addressed my issue. If I have a bunch of underlying layers, then I create a new layer (that I intend to add type to), after I click on the type tool and then onto the document the "selected layer" shifts from the "new layer" to one of the previously built underlying layers. If there is a portion of the document that has no underlying layer, them I'm OK. But with a busy composition with lots of layers, I can't seem to easily keep the selection on the "new layer" instead on an underlying one. Bill Quote Link to comment Share on other sites More sharing options...
gdenby Posted May 19, 2017 Share Posted May 19, 2017 If I have a bunch of underlying layers, then I create a new layer (that I intend to add type to), after I click on the type tool and then onto the document the "selected layer" shifts from the "new layer" to one of the previously built underlying layers. Bill You don't need to add a new layer to add a text layer. Just select frame text, and draw the box. It creates a text layer on top of everything else. For whatever reason, when I try to add a text box after making a blank layer, sometimes it goes in a previous layer, or sometime the new one. If the blank layer is highlighted in the layers panel, the text box layer goes in there. Quote iMac 27" Retina, c. 2015: OS X 10.11.5: 3.3 GHz I c-5: 32 Gb, AMD Radeon R9 M290 2048 Mb iPad 12.9" Retina, iOS 10, 512 Gb, Apple pencil Huion WH1409 tablet Link to comment Share on other sites More sharing options...
William Cartwright Posted May 19, 2017 Author Share Posted May 19, 2017 You don't need to add a new layer to add a text layer. Just select frame text, and draw the box. It creates a text layer on top of everything else. For whatever reason, when I try to add a text box after making a blank layer, sometimes it goes in a previous layer, or sometime the new one. If the blank layer is highlighted in the layers panel, the text box layer goes in there. I just tried not making a new layer to add a text layer, but—again—if there is a text layer in the area of the document I click on with the text tool selected the layer selection shifts to that older layer. It is exactly the same behavior as with trying to create a new layer first. Either way, the text tool switches the active layer to a previous layer. Turning off competing layers seems to work, but it isn't a pleasant workaround. Bill Quote Link to comment Share on other sites More sharing options...
R C-R Posted May 20, 2017 Share Posted May 20, 2017 I just tried not making a new layer to add a text layer, but—again—if there is a text layer in the area of the document I click on with the text tool selected the layer selection shifts to that older layer. Using either of the text tools, if you hover the pointer anywhere over an existing text layer, the pointer should change to the text insertion cursor (also known as the caret or I-beam cursor). This is by design. It is a visual prompt to let you know that if you click there, you will enter text entry mode on that text layer instead of creating a new one. This provides a quick & easy way to edit an existing text layer's text. Placing one text layer over another one is usually avoided for legibility reasons, but if for some reason that is what you want to do, as a workaround you can lock the existing text layer before clicking over it with a text tool. If you are using the Text Frame tool & click once over or very near an existing curve or shape layer, that layer will be selected. If you move the pointer anywhere within that shape, it will change from a square frame shape to a pentagonal shape. The pentagonal pointer shape is a visual prompt to let you know you that if you click again you will convert the shape to a text frame. If that is not what you want to do, do not click. Instead, move the pointer to some place where it reverts to the square shape, tap the escape key, or choose another tool. To avoid this, instead of clicking once over a curve or shape layer, simply click & drag to draw out a text frame in the normal way. Quote All 3 1.10.8, & all 3 V2.4.1 Mac apps; 2020 iMac 27"; 3.8GHz i7, Radeon Pro 5700, 32GB RAM; macOS 10.15.7 Affinity Photo 1.10.8; Affinity Designer 1.108; & all 3 V2 apps for iPad; 6th Generation iPad 32 GB; Apple Pencil; iPadOS 15.7 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.