AiDon Posted August 8, 2021 Posted August 8, 2021 Seems to be a regression in the Develop Persona as I am getting Blocks on the screen as in the screenshot below: Note this does not happen in the Beta 1.10.0.1127 with the GTX1050 as the renderer. Quote Both PC’s Win 11 x64 System PC1 ASUS ROG Strix - AMD Ryzen 9 6900X CPU @ 3.3GHz. 32GB RAM - GPU 1: AMD Radeon integrated. GPU 2: NVIDIA RTX 3060, 6GB PC2 ASUS ProArt PZ13 - Snapdragon X Plus X1P42100 (8 CPUs), 16GB RAM - Neural Processor - Qualcomm® Hexagon™ NPU up to 45TOPS - GPU 1: Qualcomm Adreno Graphics,
jorismak Posted August 11, 2021 Posted August 11, 2021 Same thing here with an integrated Intel HD620. Affinity Photo 1.10 final is much slower in rendering and updating with OpenCL enabled than it was in 1.9. Disabling OpenCL made it quicker for me :(. My other machine with a GTX1060 (desktop) seems to run fine with it enabled though, although I have the feeling tha tit also runs a bit slower there than it did before. It's at least not slow enough to disable OpenCL. On a laptop like yours with two GPUs, maybe you need to flag in Windows that the Affinity Photo app is supposed to use the 'performance' GPU. Or in the Nvidia panel, you can say that the application should run on the dedicated GPU. Maybe you are using your HD630 behind the scenes and running into the same issues as I (and others) have with an Intel HD6xx and Affinity Photo 1.10. Quote
AiDon Posted August 11, 2021 Author Posted August 11, 2021 Thanks, it is already flagged in the Graphics settings and set to High performance (GTX1050). Disabling OpenCL certainly helps but then there is a flicker moving between Personas. Quote Both PC’s Win 11 x64 System PC1 ASUS ROG Strix - AMD Ryzen 9 6900X CPU @ 3.3GHz. 32GB RAM - GPU 1: AMD Radeon integrated. GPU 2: NVIDIA RTX 3060, 6GB PC2 ASUS ProArt PZ13 - Snapdragon X Plus X1P42100 (8 CPUs), 16GB RAM - Neural Processor - Qualcomm® Hexagon™ NPU up to 45TOPS - GPU 1: Qualcomm Adreno Graphics,
Staff Chris B Posted August 31, 2021 Staff Posted August 31, 2021 If you're getting this with WARP and OpenCL off and on, it might be the image - does this happen if you enter Develop Persona with a JPEG? Quote How to format a bug report | Learning Resources | List of V2 FAQs | YouTube Tutorials
gebruiker Posted September 9, 2021 Posted September 9, 2021 Same over here, Photo persona, (1 sharpen layer) Nvidia GTX1060, Disabling OpenCL helps Chris B 1 Quote
AiDon Posted September 10, 2021 Author Posted September 10, 2021 On 8/31/2021 at 5:16 PM, Chris B said: If you're getting this with WARP and OpenCL off and on, it might be the image - does this happen if you enter Develop Persona with a JPEG? Hi Chris, In the latest version this blocking is there but only with OpenCL Acceleration turned on and ONLY with uncompressed RAW from Sony. Others such as CR2, CR3 and RAF seem to be OK now even with OpenCL Acceleration on. Note: Screen refresh still flickers noticeably with OpenCL off. Chris B 1 Quote Both PC’s Win 11 x64 System PC1 ASUS ROG Strix - AMD Ryzen 9 6900X CPU @ 3.3GHz. 32GB RAM - GPU 1: AMD Radeon integrated. GPU 2: NVIDIA RTX 3060, 6GB PC2 ASUS ProArt PZ13 - Snapdragon X Plus X1P42100 (8 CPUs), 16GB RAM - Neural Processor - Qualcomm® Hexagon™ NPU up to 45TOPS - GPU 1: Qualcomm Adreno Graphics,
Staff Chris B Posted September 10, 2021 Staff Posted September 10, 2021 I've seen the flickering happen when a selection is active. It's much worse that on macOS where it's barely visible. The flickering will be from redrawing the canvas when switching personas. I imagine you might see it from zooming too? I'll grab an uncompressed Sony raw file and see if I can repo - it may be worth attaching one too if you have one to share. AiDon 1 Quote How to format a bug report | Learning Resources | List of V2 FAQs | YouTube Tutorials
AiDon Posted September 10, 2021 Author Posted September 10, 2021 Ok, shall do in 8 hours or so. Chris B 1 Quote Both PC’s Win 11 x64 System PC1 ASUS ROG Strix - AMD Ryzen 9 6900X CPU @ 3.3GHz. 32GB RAM - GPU 1: AMD Radeon integrated. GPU 2: NVIDIA RTX 3060, 6GB PC2 ASUS ProArt PZ13 - Snapdragon X Plus X1P42100 (8 CPUs), 16GB RAM - Neural Processor - Qualcomm® Hexagon™ NPU up to 45TOPS - GPU 1: Qualcomm Adreno Graphics,
Staff Chris B Posted September 10, 2021 Staff Posted September 10, 2021 Thanks AiDon, I've grabbed a few from rawsamples.ch but they seem fine! Quote How to format a bug report | Learning Resources | List of V2 FAQs | YouTube Tutorials
AiDon Posted September 10, 2021 Author Posted September 10, 2021 Try this one Chris, under Windows OpenCL also selects both GPUs for hardware acceleration. Sony ARW raw image.zip Chris B 1 Quote Both PC’s Win 11 x64 System PC1 ASUS ROG Strix - AMD Ryzen 9 6900X CPU @ 3.3GHz. 32GB RAM - GPU 1: AMD Radeon integrated. GPU 2: NVIDIA RTX 3060, 6GB PC2 ASUS ProArt PZ13 - Snapdragon X Plus X1P42100 (8 CPUs), 16GB RAM - Neural Processor - Qualcomm® Hexagon™ NPU up to 45TOPS - GPU 1: Qualcomm Adreno Graphics,
Staff Chris B Posted September 14, 2021 Staff Posted September 14, 2021 Thanks AiDon. I got it straight away with this file. I'll get this logged AiDon 1 Quote How to format a bug report | Learning Resources | List of V2 FAQs | YouTube Tutorials
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.