John Rostron Posted January 19, 2020 Posted January 19, 2020 I have often used my flatbed scanner to directly create images of flat objects such as leaves, so I thought I would have a try with a slide scanner. When I retired, I was able to keep some of my computer hardware including a microscope slide holder for my Nikon LS50 slide scanner. I have been searching rather desultorily for a suitable subject to scan., The problem is that I have to first place the microscope slide in the holder, then add the subject, then a cover slip. I cannot push a loaded slide into the holder. I recently came across this subject. It was an old flower head from some composite plant with many pappuses (parachutes). I was able to detatch a few of these and immerse them in liquid and add to my slide with a coverslip. I used the top layer from a bottle of Dentyl mouthwash as a liquid medium as it wetted the pappus nicely. Post-processing comprised a bit of sharpening and a Levels adjustment. After much trial and error I managed this. It is hardly a fine photograph, more a proof of concept. I will keep hunting for a suitable subject. January is not the ideal time, but I hope to find a small skeletonized leaf. John v_kyr, Smee Again and GDPR-365024 3 Quote Windows 11, Affinity Photo 2.4.2 Designer 2.4.2 and Publisher 2.4.2 (mainly Photo). CPU: Intel Core i5 8500 @ 3.00GHz. RAM: 32.0GB DDR4 @ 1063MHz, Graphics: 2047MB NVIDIA GeForce GTX 1050
John Rostron Posted January 19, 2020 Author Posted January 19, 2020 A couple more. From the front drive, a scrap of moss. You can see the long awns on the 'leaves' A scrap of Celeriac peeling from preparing lunch. You can see the cells. The dark lines are vascular bundles. John GDPR-365024 and Smee Again 2 Quote Windows 11, Affinity Photo 2.4.2 Designer 2.4.2 and Publisher 2.4.2 (mainly Photo). CPU: Intel Core i5 8500 @ 3.00GHz. RAM: 32.0GB DDR4 @ 1063MHz, Graphics: 2047MB NVIDIA GeForce GTX 1050
v_kyr Posted January 19, 2020 Posted January 19, 2020 Interesting usage of a Coolscan V ED, although I had used this Nikon scanner a lot in past times, I never had this FH-G1medical devices adapter for it, instead just the common slide and film adapters. Quote Translation of the above from this source: Scanning specimens and other images Now it's getting exotic, but by no means unrealistic. An adapter for the medical device FH-G1 is available as a special accessory for the Nikon LS-5000 or the Nikon Coolscan 5. The scope of application for these special accessories initially seems to be very small, but the preparation is produced in many parts of science and not only in medicine. So I have already scanned thin-section preparations of various types of rock for a mineralogist. In principle, a film scanner with 4000 dpi resolution can be used with the FH-G1 as a microscope with camera. The adapter for preparations FH-G1 Slides up to a width of 26 mm can be inserted into the specimen holder. Guide rails left and right fix the carrier so that it cannot shake or fall out. The object carrier is in a slot area of two assembly clips (two springs) against inadvertent securing and an impact protected an other nut the verrutschen of the trägers. The specimen holder FH-G1 is then pushed completely into the standard MA-21 slide holder like a single framed slide. The slide can only have any length, but the scan area is in the usual 35 mm area, i.e. approx. 23 x 35 mm. The of Nikon is also intended application for the FH-G1 is the Digitalize from medical preparations. However, the FH-G1 can be misused almost anywhere. Thanks to its guides on all four sides, almost any template with a thickness of 2 mm and a width of 26 mm can be inserted and fixed. In this way I have already scanned with the FH-G1: 16 mm films, ornaments on glass plates, rock samples between glass plates, microfilm pieces. A_B_C and John Rostron 1 1 Quote ☛ Affinity Designer 1.10.8 ◆ Affinity Photo 1.10.8 ◆ Affinity Publisher 1.10.8 ◆ OSX El Capitan ☛ Affinity V2.3 apps ◆ MacOS Sonoma 14.2 ◆ iPad OS 17.2
John Rostron Posted January 19, 2020 Author Posted January 19, 2020 @v_kyr When I worked at a university, I used the FH-G1 for scanning slides of both histological sections and whole mounts of tiny animals for my lectures and on-line teaching. I had the resources there to prepare my own slides that would fit into the mount. Having retired, I do not have these resources. I bought some slides and cover slips for a modest amount. I tried placing a subject onto the slide and added some water and a cover slip. I found that if I tried to push this into the FH-G1 mount, it pushed the cover slip off the slide! Thus I ended up pushing the slide in first and then adding the subject, some liquid and the cover slip. I also suspect the performance would be enhanced were I to use a mounting medium with a higher refractive index. I really need to find some subjects that are thinner than those I have been using. On a separate issue, I have used VueScan to do the scanning. I have tried SilverFast, but this has consistently produced corrupted images which I will report to the manufacturer. (It works fine with film slides.) Quote Windows 11, Affinity Photo 2.4.2 Designer 2.4.2 and Publisher 2.4.2 (mainly Photo). CPU: Intel Core i5 8500 @ 3.00GHz. RAM: 32.0GB DDR4 @ 1063MHz, Graphics: 2047MB NVIDIA GeForce GTX 1050
v_kyr Posted January 19, 2020 Posted January 19, 2020 The above referenced article about the Coolscan V ED is also avaiable in english here. - In the past I've used mostly Nikon Scan and SilverFast with that one, though for slides. Nowadays people will for sure use some of those USB microscopes instead. John Rostron 1 Quote ☛ Affinity Designer 1.10.8 ◆ Affinity Photo 1.10.8 ◆ Affinity Publisher 1.10.8 ◆ OSX El Capitan ☛ Affinity V2.3 apps ◆ MacOS Sonoma 14.2 ◆ iPad OS 17.2
GDPR-365024 Posted January 20, 2020 Posted January 20, 2020 Interesting images! Scannography is an established art form ... check it out John Rostron 1 Quote
John Rostron Posted January 20, 2020 Author Posted January 20, 2020 6 hours ago, PedroOfOz said: Interesting images! Scannography is an established art form ... check it out Thanks for the link @PedroOfOz. If I come up with anything artistic, I will contact them. As I said earlier, what I have so far is proof of concept, but I think the field is worth exploring, if rather messy! It reminds me that in my youth, my scoutmaster's stepson was keen on artistic photomicrography. He went on to make a good living from it. See his website. John Quote Windows 11, Affinity Photo 2.4.2 Designer 2.4.2 and Publisher 2.4.2 (mainly Photo). CPU: Intel Core i5 8500 @ 3.00GHz. RAM: 32.0GB DDR4 @ 1063MHz, Graphics: 2047MB NVIDIA GeForce GTX 1050
John Rostron Posted May 11, 2020 Author Posted May 11, 2020 I have been having a further play at scanning an object directly with a Slide Scanner using VueScan. This time it was a down feather from a Wood Pigeon (courtesy of the local Sparrowhawk). It trimmed to to just over a square centimetre. I placed the slide into the holder, added the feather, then some Myristyl Alcohol, then a cover slip and then scanned it with the result below. The Myristyl Alcohol was used because it has a similar refractive index to glass. I obtained it from the top layer of a bottle of mouthwash! It also wetted the feather nicely, though there was a scattering of small bubble which I removed with the Inpainting Brush. I gave the image a touch of sharpening and a conversion to mono (it was a white feather). Down feather barbules do not have the interlocking barbicels that most other feathers have, but this image shows these barbules fanning out from the barbs of the feather. Again this is with VueScan., Even the most recent version of SilverFast refuses to work. It scans an image OK, but will not save it properly. John Quote Windows 11, Affinity Photo 2.4.2 Designer 2.4.2 and Publisher 2.4.2 (mainly Photo). CPU: Intel Core i5 8500 @ 3.00GHz. RAM: 32.0GB DDR4 @ 1063MHz, Graphics: 2047MB NVIDIA GeForce GTX 1050
John Rostron Posted May 12, 2020 Author Posted May 12, 2020 I have now managed to get SilverFast to work. I had to remove NikonScan 4 and Silverfast, reboot and then re-install. I was able to scan at 8000ppi with the following result: At this resolution, you can actually see some of the barbicels on the barbules. Again post processing was just conversion to mono and an unsharp mask. John Quote Windows 11, Affinity Photo 2.4.2 Designer 2.4.2 and Publisher 2.4.2 (mainly Photo). CPU: Intel Core i5 8500 @ 3.00GHz. RAM: 32.0GB DDR4 @ 1063MHz, Graphics: 2047MB NVIDIA GeForce GTX 1050
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.