Unahrt Posted March 18 Posted March 18 Der PDF-Export (Layoutgröße 60x14) braucht ewig oder bleibt hängen, so dass das Programm immer wieder neu gestartet werden muss. Ich hänge das Dokument mal dran. Die Probleme treten erst nach dem Update auf. Nach dem PDF-Export bleibt das Programm hängen. Es ist zwar bedienbar, führt aber keine Befehle mehr aus, beispielsweise einen weiteren Export. Banner 1-10.afdesign Quote
Unahrt Posted March 18 Author Posted March 18 Just now, Unahrt said: Der PDF-Export (Layoutgröße 60x14) braucht ewig oder bleibt hängen, so dass das Programm immer wieder neu gestartet werden muss. Ich hänge das Dokument mal dran. Die Probleme treten erst nach dem Update auf. Banner 1-10.afdesign 142.66 MB · 0 downloads Quote
Hangman Posted March 18 Posted March 18 Hallo @Unahrt, Die auf die Grasebene angewendete Mesh-Warp-Gruppe verursacht das Exportproblem, obwohl ich nicht genau weiß, warum ... Wenn Sie die Grasebene aus der Mesh-Warp-Gruppe entfernen, wird die Datei problemlos exportiert. Da die Warp-Gruppe relativ gering ist, würde ich dazu neigen, die Mesh-Warp-Gruppe vollständig zu entfernen und die Knoten auf der rechten Seite der Grasebene anzupassen, um den gleichen Effekt zu erzielen. Ich habe versucht, die Warp-Gruppe erneut anzuwenden, aber beim Exportieren der Datei tritt das gleiche Problem auf ... _________________________________ The Mesh Warp applied to the grass layer is causing the export issue, though I'm unsure specifically why... If you remove the grass layer from the Mesh Warp Group the file exports without issue. Since the Warp is relatively minimal, I would be inclined to remove the Mesh Warp completely and adjust the nodes on the right side of the grass layer to achieve the same effect. I tried reapplying the Warp Group but I see the same issue when exporting the file... Unahrt 1 Quote Affinity Designer 2.6.0 | Affinity Photo 2.6.0 | Affinity Publisher 2.6.0 Affinity Designer 2.6.2 (3213) Beta | Affinity Photo 2.6.2 (3213) Beta | Affinity Publisher 2.6.2 (3213) Beta MacBook Pro M3 Max, 36 GB Unified Memory, macOS Sonoma 14.6.1, Magic Mouse HP ENVY x360, 8 GB RAM, AMD Ryzen 5 2500U, Windows 10 Home, Logitech Mouse
Unahrt Posted March 18 Author Posted March 18 Just now, Hangman said: Hallo @Unahrt, Die auf die Grasebene angewendete Mesh-Warp-Gruppe verursacht das Exportproblem, obwohl ich nicht genau weiß, warum ... Wenn Sie die Grasebene aus der Mesh-Warp-Gruppe entfernen, wird die Datei problemlos exportiert. Da die Warp-Gruppe relativ gering ist, würde ich dazu neigen, die Mesh-Warp-Gruppe vollständig zu entfernen und die Knoten auf der rechten Seite der Grasebene anzupassen, um den gleichen Effekt zu erzielen. Ich habe versucht, die Warp-Gruppe erneut anzuwenden, aber beim Exportieren der Datei tritt das gleiche Problem auf ... _________________________________ The Mesh Warp applied to the grass layer is causing the export issue, though I'm unsure specifically why... If you remove the grass layer from the Mesh Warp Group the file exports without issue. Since the Warp is relatively minimal, I would be inclined to remove the Mesh Warp completely and adjust the nodes on the right side of the grass layer to achieve the same effect. I tried reapplying the Warp Group but I see the same issue when exporting the file... Ok, vielen Dank. Das ist wirklich gut zu wissen und erleichtert garantiert das weitere arbeiten:) Quote
Hangman Posted March 18 Posted March 18 57 minutes ago, Unahrt said: Ok, vielen Dank. Das ist wirklich gut zu wissen und erleichtert garantiert das weitere arbeiten:) Überhaupt kein Problem. Unahrt 1 Quote Affinity Designer 2.6.0 | Affinity Photo 2.6.0 | Affinity Publisher 2.6.0 Affinity Designer 2.6.2 (3213) Beta | Affinity Photo 2.6.2 (3213) Beta | Affinity Publisher 2.6.2 (3213) Beta MacBook Pro M3 Max, 36 GB Unified Memory, macOS Sonoma 14.6.1, Magic Mouse HP ENVY x360, 8 GB RAM, AMD Ryzen 5 2500U, Windows 10 Home, Logitech Mouse
Bryce Posted March 18 Posted March 18 I don't know if this is part of the same problem or not, but I'm getting a funky exporting of a warp group. I'm using the generic "PDF for Print" export setting. Perhaps related? Quote
Hangman Posted March 19 Posted March 19 Hi @Bryce, This is a slightly different issue in as much as it affects things other than just Warp Groups... The only workaround for this with your example would be to convert the Warriors text to Curves before exporting to PDF. I would duplicate the Live text layer, in case you need to edit it later, hide the live text layer, convert the original layer to Curves and then export... Quote Affinity Designer 2.6.0 | Affinity Photo 2.6.0 | Affinity Publisher 2.6.0 Affinity Designer 2.6.2 (3213) Beta | Affinity Photo 2.6.2 (3213) Beta | Affinity Publisher 2.6.2 (3213) Beta MacBook Pro M3 Max, 36 GB Unified Memory, macOS Sonoma 14.6.1, Magic Mouse HP ENVY x360, 8 GB RAM, AMD Ryzen 5 2500U, Windows 10 Home, Logitech Mouse
Bryce Posted March 20 Posted March 20 My workaround was to tell the export to rasterize everything and it was fine then. Obviously it lost the vector in the PDF, but that is not a problem on this. Hangman 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.