beertje53 Posted April 17 Share Posted April 17 You can also create and store your own Luts. But there is a catch here. In version AP1 it worked without problems, in AP2 I have not yet succeeded in using my own Lut. Yes I can load it from the saved local folder, but it does not work. Quote Link to comment Share on other sites More sharing options...
GarryP Posted April 17 Share Posted April 17 “does not work” is a too vague for us to have an idea of what the problem could be. If you can share the LUT, and an image you are using it with, and tell us what you would expect to happen when applying the LUT to the image, we can have a look at them to see if we can find what the problem is. Quote Link to comment Share on other sites More sharing options...
beertje53 Posted April 17 Author Share Posted April 17 Try to place these on any photo, you will find that it fails. It does with LUTs I get off the internet. But where it goes wrong I don't know, on AP1 it all works. regards Johan 123.cube Quote Link to comment Share on other sites More sharing options...
GarryP Posted April 17 Share Posted April 17 Thanks for sharing the LUT. I’ve just tried to apply it to the same image in both Photo V1.10.6 and Photo V2.4.1 and nothing seems to happen. I tried a very different image, in both, and nothing seemed to happen with that either. Same in Designer V2.4.1. Hopefully one of the LUT experts will come along and be able to explain what’s happening. Quote Link to comment Share on other sites More sharing options...
David in Яuislip Posted April 17 Share Posted April 17 It's an identity lut which will do nothing. Note that nested adjustment layers are not included when exporting LUT, the adjustments must be above the image layer Below is a comparison taken at random, mine's on the right TITLE "12&3" TITLE "Exported LUT" #LUT data points #LUT data points 0.418182 0.072727 0 0.418182 0.072727 0 0.436364 0.072727 0 0.436364 0.072727 0 0.454545 0.072727 0 0.454545 0.072727 0 0.472727 0.072727 0 0.472727 0.072727 0 0.490909 0.072727 0 0.490909 0.072727 0 0.509091 0.072727 0 0.509091 0.072727 0 0.527273 0.072727 0 0.527273 0.072727 0 0.545455 0.072727 0 0.545455 0.072727 0 0.563636 0.072727 0 0.563636 0.072727 0 0.581818 0.072727 0 0.581818 0.072727 0 0.6 0.072727 0 0.6 0.072727 0 0.618182 0.072727 0 0.618182 0.072727 0 0.636364 0.072727 0 0.636364 0.072727 0 0.654545 0.072727 0 0.654545 0.072727 0 0.672727 0.072727 0 0.672727 0.072727 0 0.690909 0.072727 0 0.690909 0.072727 0 0.709091 0.072727 0 0.709091 0.072727 0 0.727273 0.072727 0 0.727273 0.072727 0 0.745455 0.072727 0 0.745455 0.072727 0 0.763636 0.072727 0 0.763636 0.072727 0 0.781818 0.072727 0 0.781818 0.072727 0 0.8 0.072727 0 0.8 0.072727 0 0.818182 0.072727 0 0.818182 0.072727 0 0.836364 0.072727 0 0.836364 0.072727 0 0.854545 0.072727 0 0.854545 0.072727 0 0.872727 0.072727 0 0.872727 0.072727 0 0.890909 0.072727 0 0.890909 0.072727 0 0.909091 0.072727 0 0.909091 0.072727 0 0.927273 0.072727 0 0.927273 0.072727 0 0.945455 0.072727 0 0.945455 0.072727 0 0.963636 0.072727 0 0.963636 0.072727 0 0.981818 0.072727 0 0.981818 0.072727 0 Quote Microsoft Windows 11 Home, Intel i7-1360P 2.20 GHz, 32 GB RAM, 1TB SSD, Intel Iris Xe Affinity Photo - 24/05/20, Affinity Publisher - 06/12/20, KTM Superduke - 27/09/10 Link to comment Share on other sites More sharing options...
beertje53 Posted April 17 Author Share Posted April 17 dear, if I have an image, I put a pixel layer on it, fill it with color, reduce it with opacity so I have the desired intensity. export this as a LUT, remove the pixel layer, insert the LUT and it doesn't work ? Quote Link to comment Share on other sites More sharing options...
David in Яuislip Posted April 17 Share Posted April 17 Check the Help for "Exporting custom adjustments as LUTs" Possibly use a Recolour adjustment layer Quote Microsoft Windows 11 Home, Intel i7-1360P 2.20 GHz, 32 GB RAM, 1TB SSD, Intel Iris Xe Affinity Photo - 24/05/20, Affinity Publisher - 06/12/20, KTM Superduke - 27/09/10 Link to comment Share on other sites More sharing options...
walt.farrell Posted April 17 Share Posted April 17 50 minutes ago, beertje53 said: dear, if I have an image, I put a pixel layer on it, fill it with color, reduce it with opacity so I have the desired intensity. export this as a LUT, remove the pixel layer, insert the LUT and it doesn't work ? As David mentioned, you need to use Adjustment layers. That is what the Export LUT process uses. Quote -- Walt Designer, Photo, and Publisher V1 and V2 at latest retail and beta releases PC: Desktop: Windows 11 Pro, version 23H2, 64GB memory, AMD Ryzen 9 5900 12-Core @ 3.00 GHz, NVIDIA GeForce RTX 3090 Laptop: Windows 11 Pro, version 23H2, 32GB memory, Intel Core i7-10750H @ 2.60GHz, Intel UHD Graphics Comet Lake GT2 and NVIDIA GeForce RTX 3070 Laptop GPU. iPad: iPad Pro M1, 12.9": iPadOS 17.4.1, Apple Pencil 2, Magic Keyboard Mac: 2023 M2 MacBook Air 15", 16GB memory, macOS Sonoma 14.4.1 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.