Cannot paint in mask in Affinity Photo 2.3.1

[webb]

Affinity Photo 2.3.1

Windows 10 22H2

AMD Ryzen 9 5900X

32GB RAM

Hardware acceleration: Default (NVIDIA 3070) 

Graphics tablet and pen: Intuos CTH-690

Reproducible: YES

Problem occurs in new document? SOMETIMES

WHAT HAPPENED:

Was editing a photo, decided to convert to RGB/32 to use subtractive saturation.  Added a pixel layer and a mask, selected paintbrush tool, set it to black at 100% opacity and 10% hardness, tried to paint, but it wouldn't.  Tried with graphics tablet and with mouse, neither worked. Gradient tool worked successfully in mask, but of course wasn't what I needed.

Re-converting back to RGB/16 did not help. Changing hardware acceleration to WARP did not help. Restarting Affinity Photo did not help. Closed the problem photo.

Restarted Affinity Photo and loaded a different photo and did NOT convert to RGB/32 from RGB/16. Added a pixel layer and a mask and COULD successfully paint on it.  Closed Affinity Photo, tried painting on a mask in a new photo (in RGB/16) and now I could NOT paint on a mask.

The only thing that has changed recently is upgrading Affinity applications.

I've enclosed the problem RGB/32 file (bets-380-subtractive-saturation.afphoto) and the "virgin" RGB/16 file that also had the mask problem (P7080037.afphoto.) Please do not make either photo public.

bets-380-subtractive saturation.afphoto P7080037.afphoto

P7080037.afphoto bets-380-subtractive saturation.afphoto

[NotMyFault]

6 hours ago, webb said:

Added a pixel layer and a mask, selected paintbrush tool, set it to black at 100% opacity and 10% hardness, tried to paint, but 

All said sounds more like a generic „brush does not work“ issue not related to RGB/32.

Whenever you observer a brush not working, the first things to do:

• save file with history. This really helps to analyze the issue.
• Do not close Photo, let it open
• Create a new document, add a pixel layer, try the same tool (pixel brush, erase brush) there. Does it work?
• Use layer isolation /solo mode 
• use navigator panel and make it really large 
• make a screen recording using the Windows default tools.

[Dan C]

Hi Webb, 

I'm not able to recreate your issue, if you could try the above posted by @NotMyFault and share the video here, that would be very helpful.

Lee

[webb]

@NotMyFault is right about this being a more general problem of the brush not working. I swear when I was testing earlier I could paint on masks when working in RGB/16, but now neither the mouse nor the graphic tablet seems to work on masks or otherwise, whether using 8-, 16-, or 32-bit settings.

Enclosed is a simple afphoto file (history saved) and a video that shows the failure.

What I did:  created a new document, added a pixel layer, filled it with turquoise, selected the paint brush tool, ensured it was set to black, and attempted to paint in black on the turquoise pixel layer, but I couldn't. The paint brush cursor is hard to see on the video, so I made the history visible so you can see that I used it. This is an RGB/8 example.

Previously, thinking this might be some strangeness about my setup, I reinstalled AP and rebooted, but the brush behavior was unchanged. The file and the video were created after I had done this.

I can't imagine that this is a widespread problem with AP since painting is so fundamental--it must be something about my setup...but I simply don't know how to get that functionality back. Certainly open to suggestions.

    --Webb

brush-not-working.afphoto

[NotMyFault]

Brush flow is zero. 
 

[webb]

My face is red! That was the problem. Don't know how brush flow got set to 0, but setting it to 100 solved my issue.

Thank you, @NotMyFault, despite my embarrassment.

    --Webb

[NotMyFault]

You are welcome. We all have moments not recognizing the obvious