Keyless Posted July 31, 2019 Share Posted July 31, 2019 I created a two-page document in Publisher. When printing, I wanted to print on both sides of one sheet of paper, so "two-sided" is checked in my printer dialog. The orientation looks correct in both Publisher and the print dialog. But on the actual print, one page is upside down from the other. What do I do to print with the correct vertical orientation on both sides of the paper? Quote Link to comment Share on other sites More sharing options...
Staff Dan C Posted August 1, 2019 Staff Share Posted August 1, 2019 Hi Keyless, Welcome to the forums What settings have you set in the print dialogue in Affinity? Do these match the printers driver settings (opened through 'Properties' in the print dialogue)? I've just created a 2 page test document in Publisher, then in the print dialogue under Layout I have the following options - I then opened Properties and set the following settings (although this will vary depending on your printer and driver) The document I printed was double sided, with page 2 printing the correct way up. Do your settings match the above? Quote Please note - I am currently out of the office for a short while whilst recovering from surgery (nothing serious!), therefore will not be available on the Forums during this time. Should you require a response from the team in a thread I have previously replied in - please Create a New Thread and our team will be sure to reply as soon as possible. Many thanks! Link to comment Share on other sites More sharing options...
Keyless Posted August 1, 2019 Author Share Posted August 1, 2019 (edited) 10 hours ago, Dan C said: What settings have you set in the print dialogue in Affinity? Do these match the printers driver settings (opened through 'Properties' in the print dialogue)? Thank you for your response. Unfortunately, I cannot find any settings pages that look anything like either of your posted examples. Maybe because I use only Macs and not PC. In your screenshot I see a setting for Double Sided, set to "flip long side". This seems like it might do it, but I have not been able to locate this dialog. When I select "Print" from the file menu, the standard Mac printer dialog pops up. Attached are screenshot of what I see. In the 2nd screenshot is the "layout" section which a show "model" choice menu, but I wouldn't know which one to choose or if any would resolve the issue Edited August 1, 2019 by Keyless more info submitted Quote Link to comment Share on other sites More sharing options...
Staff Dan C Posted August 2, 2019 Staff Share Posted August 2, 2019 10 hours ago, Keyless said: I see a setting for Double Sided, set to "flip long side". This seems like it might do it, but I have not been able to locate this dialog. As your document is in landscape you'll need to 'flip short side' in order for the back of your print not to be flipped. Open the print dialogue and tick Two Sided to the right hand side of 'Copies'. Now change the dropdown list to 'Layout' (not document layout) and change the 'Two-Sided' option here to Short-Edge binding. Now you should find that the document prints correctly! Quote Please note - I am currently out of the office for a short while whilst recovering from surgery (nothing serious!), therefore will not be available on the Forums during this time. Should you require a response from the team in a thread I have previously replied in - please Create a New Thread and our team will be sure to reply as soon as possible. Many thanks! Link to comment Share on other sites More sharing options...
Keyless Posted August 5, 2019 Author Share Posted August 5, 2019 On 8/2/2019 at 12:33 AM, Dan C said: Open the print dialogue and tick Two Sided to the right hand side of 'Copies'. Now change the dropdown list to 'Layout' (not document layout) and change the 'Two-Sided' option here to Short-Edge binding. Thank you so much for your assistance with this! I did manage to locate these parameters and set it as you have instructed. The print orientation came out correctly this time. The issue is solved! There is no way I could have figured this out without your help. Thank you again! Dan C 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.