Ivan_M Posted June 29, 2019 Share Posted June 29, 2019 Hello. I encounter some weird problem with Move Tool in Affinity Designer 1.7.1.404. Here's the steps before the problem appears: I duplicated and stretched one of these small red vertical rectangle(see attached pictures), then colored it green. After these actions it turns out that I can't select any other objects near this green rectangle by clicking on them - it select green rectangle only. Although I can select them by clicking and draging Move Tool from unaffected area. It affected only area on the sides of the rectangle(dimension I have modified), not the top or bottom. On the second picture I hatched exact area there's effect appears - clikc on anything inside with Move Tool results only with selecting green rectangle. It runs from left side of working area to the vertical red rectangle on the right. If I place another object on the layer above, selection works properly, but anything below is affected. If I stretch green rectangle in vertical dimension, affected area shrinks, but not disappearing. Closing and re-opening the document doesn't help. As a wild guess, I think the program miscalculated my actions and disproportionately increase the active area of new object. All objects on separated layers, no groups. Problem appears not the first time and have a random character. Unfortunately, I didn't remember on what version it started. Running on Win 10 x64. How can I fix it? Thanx. Quote Link to comment Share on other sites More sharing options...
Staff Sean P Posted July 17, 2019 Staff Share Posted July 17, 2019 Hi Ivan_M, Welcome to the Affinity Forums! Do you have a copy of the document you could attach prior to it going wrong? If not could you attach the one shown in your screenshot please? Ivan_M 1 Quote Link to comment Share on other sites More sharing options...
Ivan_M Posted July 20, 2019 Author Share Posted July 20, 2019 On 7/17/2019 at 5:40 PM, Sean P said: Hi Ivan_M, Welcome to the Affinity Forums! Do you have a copy of the document you could attach prior to it going wrong? If not could you attach the one shown in your screenshot please? Hello, thanx! I have the original document, but it's heavily modified now and I already deleted troubled objects, but I managed to recreate the problem again. I select object in group by a Ctrl modifier, Ctrl+C, deselect, Ctrl+V, then relocate, stretch it in one dimension(in my current case it's vertical) and effect appears again. One additional moment - the size of select-sensitive area is vary due the zoom scale, I marked the active area on 100% zoom. СТОЛ_troubleshoot.afdesign Quote Link to comment Share on other sites More sharing options...
Staff Sean P Posted July 22, 2019 Staff Share Posted July 22, 2019 Thanks for the file Ivan_M, I've reproduced it and passed it on to development. It does indeed seem to be an issue that is already logged with them. Quote Link to comment Share on other sites More sharing options...
Ivan_M Posted July 22, 2019 Author Share Posted July 22, 2019 Ok, that's good. Wishing them the best luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.