elmonopascual Posted June 7, 2019 Share Posted June 7, 2019 Hi, I think there is a bug with the dropper tool (color picker tool): 1 - Create a new document 2 - Draw a rectangle 3 - Select a color from the panel of swatches to apply as a fill for the rectangle (for example, the second (orange) of the Colours palette, H: 21, S: 90, L: 50) 4 - Drag the dropper to the rectangle to take the fill color sample 5 - Click on the selected dropper color ... The color applied is different from the one originally in the rectangle (H: 13, S: 100, L: 50). The same happens with the color wheel, the panel that is under the sliders, etc. Also when comparing CMYK values, they are different too. I'm using the version 1.7.0.367. EDIT: The same problem is present in Affinity Publisher (last version). In Affinity Photo it seems to work OK. EDIT: I attach an image to clarify... Link to comment Share on other sites More sharing options...
elmonopascual Posted June 8, 2019 Author Share Posted June 8, 2019 I have noticed that if the color space is RGB (new / type: print), the problem occurs much less frequently than if the color space is CMYK (new / type: print press ready). For example, in RGB, with the second color of the palette (orange) does not give problems, but with the fourth color, the problem occurs (yellow). This way, the color picker is not accurate. Can someone confirm it? EDIT: If I use the color space CMYK in Affinity Photo, the problems occurs too. Link to comment Share on other sites More sharing options...
VolkerMB Posted June 9, 2019 Share Posted June 9, 2019 Sorry, works fine at my end in both RGB and LAB documents. There is neither a visual difference nor one in values. Link to comment Share on other sites More sharing options...
elmonopascual Posted June 9, 2019 Author Share Posted June 9, 2019 I attach a video (using the color wheel to choose the fill color of a rectangle, then with dropper pick the fill color, and finally apply the picked color to the same rectangle: the HSL values change!!!)... By the way, my color picker is configured to 1x1 (point). Color Picker Tool.mp4 Link to comment Share on other sites More sharing options...
VolkerMB Posted June 11, 2019 Share Posted June 11, 2019 (edited) I agree with you: something is off here... Initially I had tested the color picker with RGB and Lab documents. And in both cases it works fine. But it is different in a CMYK document. First I thought it is because HSL is defined in reference to the RGB color space (and therefore misleading in CMYK enviroments). But even if I switch to the CMYK sliders instead of the color wheel something is wrong. One example: I created a rectangle in a CMYK document and set it to 61-0-65-0 (using the color bar beneath the sliders). But the picker tool read 87-0-42-0 - although nothing changed visually. So I stand corrected: There is most probably a bug hidden in the system... Edited June 11, 2019 by VolkerMB misspelling elmonopascual 1 Link to comment Share on other sites More sharing options...
elmonopascual Posted June 11, 2019 Author Share Posted June 11, 2019 Thanks VolkerMB. I was already thinking that it would be a problem of my configuration or video card, monitor, etc. But it seems to be a bug present in the three all apps: Designer, Photo and Publisher. Thanks for checking it. Link to comment Share on other sites More sharing options...
Loris Vicari Posted June 21, 2020 Share Posted June 21, 2020 Hi guys, I'm a newbie, I report to you that this issue there is even now, at least in the version 1.8.3 of Photo. Link to comment Share on other sites More sharing options...
Zephod Posted August 26, 2022 Share Posted August 26, 2022 Just ran in to this problem too in 1.10.5 -> in CMYK mode the eyedropper tool reliably returns wrong colours. Link to comment Share on other sites More sharing options...
Recommended Posts