Jump to content

Can anyone recommend an acrobat pro alternative?


Recommended Posts

I'm a Mac user who has no choice but to use El Capitan as I need to use illustrator cs5 to plug the gaps of all the stuff that Designer doesn't currently do - but as theres light at the end of the tunnel, I would like to move to Mojave at some point but have the main hold back of Acrobat pro 9.5.5 and X being 32bit applications (so not Mojave compatible) - so just wondering if anyone can recommend an alternative that does all the print stuff - Check separations and ink density, Verify PDF/X standards conformance and all that, also with the ability to print nice sharp vectors and text to postscript printers for proofing purposes (something Affinity doesn't currently do), I've been searching around and theres loads of alternatives that do all the forms stuff, text edits, annotations, pdf merging, but I can't seem to find anything that will do the really important, piece of mind stuff before I send a pdf off the printers, apart from Calls PDF toolbox which is around £500  

Daz1.png

Mac Pro Cheese-grater (Early 2009) 2.93 GHz 6-Core Intel Xeon 48 GB 1333 MHz DDR3 ECC Ram NVIDIA GeForce GT 630 - 2 GBUgee 19" Graphics Tablet Monitor Mac OS Mojave 10.14.6

Affinity Designer, Photo and Publisher 1.9.2 + Illustrator CS5 / VectorStyler mainly for Vector distortion workarounds + InDesign CS5 for multipage spread jobs with Slug + ImageVectoizer / Vectorize for raster to vector conversions

www.bingercreative.co.uk

 

 

 

 

 

Link to post
Share on other sites
  • Replies 201
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

I'm a Mac user who has no choice but to use El Capitan as I need to use illustrator cs5 to plug the gaps of all the stuff that Designer doesn't currently do - but as theres light at the end of the tun

Hi all, I'm the developer of PDF Checkpoint. A user pointed me to this discussion and it's good to see PDF Checkpoint mentioned on your forum. As someone correctly mentioned earlier, PDF Che

Sure, but I have to think of myself, too  Happily it seems that I picked the right route, as it proved out that Visual Studio 2019 for macOS not only can use the core code more or less without changes

1 hour ago, Dazmondo77 said:

...but I can't seem to find anything that will do the really important, piece of mind stuff before I send a pdf off the printers, apart from Calls PDF toolbox which is around £500  

I'm afraid pdfToolbox is the only alternative. The maker, callas, is who licenses its technology to Adobe for Acrobat.

Link to post
Share on other sites

Damn - in that case I hope Serif continues to develop for El Capitan as I'm gonna have to stick with Acrobat 9.5.5 which works great in El Capitan  - wish I could afford pdftoolbox - shame they can't do a trimmed down version for skint freelancers

Daz1.png

Mac Pro Cheese-grater (Early 2009) 2.93 GHz 6-Core Intel Xeon 48 GB 1333 MHz DDR3 ECC Ram NVIDIA GeForce GT 630 - 2 GBUgee 19" Graphics Tablet Monitor Mac OS Mojave 10.14.6

Affinity Designer, Photo and Publisher 1.9.2 + Illustrator CS5 / VectorStyler mainly for Vector distortion workarounds + InDesign CS5 for multipage spread jobs with Slug + ImageVectoizer / Vectorize for raster to vector conversions

www.bingercreative.co.uk

 

 

 

 

 

Link to post
Share on other sites

Take a look on https://www.qoppa.com/pdfstudio - I own the older Pro version and coming from Acrobat Pro X I am quite happy with it, although I am not sure if it does really everything you mentioned. You can try yourself the free trial here: https://www.qoppa.com/pdfstudio/download and at the moment they have promos 25 % Valentine discount + next version for free with purchase. Just note that it requires Java (at least the older version I own).

Link to post
Share on other sites

Checking PDF's before I sent them off to the printers is something I've done for around 15 years, it's just a piece of mind thing just to check for errors and make sure spot colours and stuff are all intact - I can't imagine sending to printers without - it's flagged loads of potential errors over the years, stuff like missing spot colours, blacks with an ink density over 300% and vectors that rasterise - all easy fixes, can't believe theres nothing out there to plug the gap at a reasonable price 

Daz1.png

Mac Pro Cheese-grater (Early 2009) 2.93 GHz 6-Core Intel Xeon 48 GB 1333 MHz DDR3 ECC Ram NVIDIA GeForce GT 630 - 2 GBUgee 19" Graphics Tablet Monitor Mac OS Mojave 10.14.6

Affinity Designer, Photo and Publisher 1.9.2 + Illustrator CS5 / VectorStyler mainly for Vector distortion workarounds + InDesign CS5 for multipage spread jobs with Slug + ImageVectoizer / Vectorize for raster to vector conversions

www.bingercreative.co.uk

 

 

 

 

 

Link to post
Share on other sites

As @fde101 says, 32-bit applications do run under Mojave, although I can't myself check the performance of your versions of Acrobat Pro or Illustrator.

One thing to consider, though, is that if you're using the Mid 2009 MacBook Pro listed in your profile, it's not Mojave compatible. Even Sierra and High Sierra won't run: I'm pretty sure El Cap is the end of the line.

I don't know if it's any help but there's also Markzware FlightCheck. It's not free, but it looks a bit less expensive than PDF Toolbox. I haven't used it myself.

Affinity Photo 1.9.2,  Affinity Designer 1.9.2, Affinity Publisher 1.9.2, Mac OSX 11.2, 2018 MacBook Pro 15"

Betas as they happen... 

Link to post
Share on other sites

I've been researching this exact same issue for a while now and tried everything! except Callas because this starving artist will never be loaded with money enough for that! lol It's a ridiculous omission and almost absurd that more companies aren't trying to get in on this. I wish Callas had a 'lite' version.  For separations, right now I take my file over to Scribus to do color separations and it does them fine but I'm not sure it can do them as advanced as you need. But it's free and open source so you wouldn't lose out to try! Good luck! And if you do run across a solution, PLEASE let us know!

Link to post
Share on other sites
3 minutes ago, Pariah73 said:

I've been researching this exact same issue for a while now and tried everything! except Callas because this starving artist will never be loaded with money enough for that! lol It's a ridiculous omission and almost absurd that more companies aren't trying to get in on this.

Any company can likely license callas technology and roll it into their pdf software like Adobe does. But I doubt they will.

Professional software costs money. If someone makes money from their work, it's mainly the initial cost that hurts. Upgrades are $199 if I recall. pdfToolbox also does imposition so there is that...

Link to post
Share on other sites
2 minutes ago, MikeW said:

Any company can likely license callas technology and roll it into their pdf software like Adobe does. But I doubt they will.

Professional software costs money. If someone makes money from their work, it's mainly the initial cost that hurts. Upgrades are $199 if I recall. pdfToolbox also does imposition so there is that...

What I find difficult to understand is that Callas is the only game in town as far as the particular features the OP is looking for.  And nobody is saying they want it for free. While that's always nice, for something like that, most people expect to pay but not all of us can afford Adobe prices and Callas prices. I'm happy for anyone who can, naturally.

Link to post
Share on other sites
22 minutes ago, Pariah73 said:

What I find difficult to understand is that Callas is the only game in town as far as the particular features the OP is looking for.  And nobody is saying they want it for free. While that's always nice, for something like that, most people expect to pay but not all of us can afford Adobe prices and Callas prices. I'm happy for anyone who can, naturally.

I imagine that the market is relatively small. If you want sticker shock, there is an add-on for Acrobat that many/most professional print establishments use and is far more capable. 

Link to post
Share on other sites

oh trust me, the market for us starving artists is by no means small :D Companies are really missing out by not competing more with Adobe on this. I have some alternatives to try out but I'm annoyed at having to sign up for a free trial. Erg. When I'm done being salty about that, I'll try them out and hopefully find a cheaper alternative to Adobe for color seps. @Dazmondo77  In the meantime, though, Scribus works just fine for me and it happens to be free. Not sure if it meets the needs of the OP, though.

 

Link to post
Share on other sites
6 hours ago, Jens Krebs said:

Enfocus Connect

Pitstop is also $$$ and looks like it requires Acrobat but Connect has a "Connect You" version for a single user that is $149 for a permanent license and that looks like it might do the trick at a much more reasonable price than most of the rest of what is out there...  I will need to experiment with the demo later when I have some time.  That one might have some potential.

Link to post
Share on other sites

I had similar problems and needed to move away from Adobe Acrobat.

I tried several possible alternatives none of which completely matched the abilities of AA.

Eventually I settled on this:

PDFpenPro

Smile offer a Free Trial period so there is nothing to lose by giving it a whirl?

Best regards,

G

Link to post
Share on other sites

After trying LOTS of PDF programs, I can say I haven't found a single one that does color seps. Tried PDF Exchange, PDFSam, PDF Architect, Bullzip, Sumatra, PDF Creator, PDFill (which had the best value -$20- for pro if you can deal with the hideous interface) Foxit Reader (trial of Phantom PDF) Nitro..there's some more that I can't remember. Only program I've discovered is Callas PDF uh..something..anyhow it's just as expensive as AA. Horribly neglected field of software IMO. I ended up creating a PDF in AD, then handing that off to Scribus for color separations. Not perfect but it works.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please note there is currently a delay in replying to some post. See pinned thread in the Questions forum. These are the Terms of Use you will be asked to agree to if you join the forum. | Privacy Policy | Guidelines | We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.