Stuart.p Posted February 10, 2019 Share Posted February 10, 2019 Hi. Firstly I noticed that the Import ICC Profile only wants to see .icc files and not .icm files. 2ndly, system and image are AdobeRGB1998 colourspace and monitor is calibrated as such with an internal 3D LUT. I have been looking at soft proofing and it seems the that trying to use the sRGB IEC1966 (standard system profile) does not do as expected, that is transform the AdobeRGB colourspace to sRGB. Not sure why, but it is certainly OK in PS and GIMP v2.10. thanks Quote Link to comment Share on other sites More sharing options...
lepr Posted February 10, 2019 Share Posted February 10, 2019 . Quote Link to comment Share on other sites More sharing options...
Staff Dan C Posted February 10, 2019 Staff Share Posted February 10, 2019 Hi Stuart.p, Welcome to the forums To use .icm files, these need to be installed at a system level, please close Affinity, install the profile and then re-open the app. You should now find this profile available. What results are you seeing when using the sRGB soft proof layer? Quote Link to comment Share on other sites More sharing options...
BofG Posted February 10, 2019 Share Posted February 10, 2019 1 hour ago, Dan C said: Hi Stuart.p, Welcome to the forums To use .icm files, these need to be installed at a system level, please close Affinity, install the profile and then re-open the app. You should now find this profile available. What results are you seeing when using the sRGB soft proof layer? Hi Dan, Slightly hijacking this.. when you say "available", should an installed profile be available in the print dialogue? I have asked in another thread about a CMYK profile that only shows in soft proof/document colour setting. No one seems to know if CMYK printer profiles should show up in the print options. I'm on windows, profile was created/installed through colormunki. Thanks Quote Link to comment Share on other sites More sharing options...
Staff Dan C Posted February 11, 2019 Staff Share Posted February 11, 2019 Hi BofG 16 hours ago, BofG said: when you say "available", should an installed profile be available in the print dialogue? If the profile has been installed at a system level, through the OS, then it should be available as a colour profile in app, both in the document setup and the print dialogue. Could you provide a copy of the .ICC file so I can test this here? I must admit I've not got much experience with colourmuki, and this may be the cause of the profile not showing in the print dialogue. Quote Link to comment Share on other sites More sharing options...
BofG Posted February 11, 2019 Share Posted February 11, 2019 Hi Dan, Thanks for replying, if you see this thread: I've uploaded a profile on there, others have checked it on Windows and it's not on the print dialouge. It's not just that specific profile, there are no default cmyk profiles in the list either. Quote Link to comment Share on other sites More sharing options...
BofG Posted February 12, 2019 Share Posted February 12, 2019 Hi @Dan C, did you have a chance to take a look at this? Quote Link to comment Share on other sites More sharing options...
Staff Dan C Posted February 12, 2019 Staff Share Posted February 12, 2019 Thanks for that, both myself and my colleague are looking into this and will reply asap with our findings Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.