Petar Petrenko Posted November 19, 2018 Share Posted November 19, 2018 Hi, when I press "Node Tool > Transform mode", all nodes on selected object are locked. Is this OK, or is something wrong? All the latest releases of Designer, Photo and Publisher (retail and beta) on MacOS and Windows. 15” Dell Inspiron 7559 i7 ● Windows 10 x64 Pro ● Intel Core i7-6700HQ (3.50 GHz, 6M) ● 16 GB Dual Channel DDR3L 1600 MHz (8GBx2) ● NVIDIA GeForce GTX 960M 4 GB GDDR5 ● 500 GB SSD + 1 TB HDD ● UHD (3840 x 2160) Truelife LED - Backlit Touch Display 32” LG 32UN650-W display ● 3840 x 2160 UHD, IPS, HDR10 ● Color Gamut: DCI-P3 95%, Color Calibrated ● 2 x HDMI, 1 x DisplayPort 13.3” MacBook Pro (2017) ● Ventura 13.6 ● Intel Core i7 (3.50 GHz Dual Core) ● 16 GB 2133 MHz LPDDR3 ● Intel Iris Plus Graphics 650 1536 MB ● 500 GB SSD ● Retina Display (3360 x 2100) Link to comment Share on other sites More sharing options...
adirusf Posted November 19, 2018 Share Posted November 19, 2018 Same behave here but if i select 2 or 3 nodes seems that transform mode is active and i can rotate selected nodes Patrick Connor and Petar Petrenko 2 Link to comment Share on other sites More sharing options...
Petar Petrenko Posted November 19, 2018 Author Share Posted November 19, 2018 Aha, I didn't expect that more than one node must be selected. It now work as it should. Thanks @adirusf All the latest releases of Designer, Photo and Publisher (retail and beta) on MacOS and Windows. 15” Dell Inspiron 7559 i7 ● Windows 10 x64 Pro ● Intel Core i7-6700HQ (3.50 GHz, 6M) ● 16 GB Dual Channel DDR3L 1600 MHz (8GBx2) ● NVIDIA GeForce GTX 960M 4 GB GDDR5 ● 500 GB SSD + 1 TB HDD ● UHD (3840 x 2160) Truelife LED - Backlit Touch Display 32” LG 32UN650-W display ● 3840 x 2160 UHD, IPS, HDR10 ● Color Gamut: DCI-P3 95%, Color Calibrated ● 2 x HDMI, 1 x DisplayPort 13.3” MacBook Pro (2017) ● Ventura 13.6 ● Intel Core i7 (3.50 GHz Dual Core) ● 16 GB 2133 MHz LPDDR3 ● Intel Iris Plus Graphics 650 1536 MB ● 500 GB SSD ● Retina Display (3360 x 2100) Link to comment Share on other sites More sharing options...
Staff Sean P Posted November 20, 2018 Staff Share Posted November 20, 2018 Hi Petar, This mode is specifically designed to allow you to transform multiple node selections as mentioned above. However when I was using it a while ago I forgot I enabled it and it took me some time before I realised why I could move a node. Therefore I passed it over to development that if only one node is selected it should act as though the button is disabled! Petar Petrenko 1 Link to comment Share on other sites More sharing options...
Recommended Posts