abf Posted September 3, 2018 Share Posted September 3, 2018 Imported a both a indesign pdf and an apples pages pdf . Both opened fine and were editable however when I tried to print the files I have been presented with a blank page. Is this a bug or is there a step I'm missing Link to comment Share on other sites More sharing options...
Staff Pauls Posted September 14, 2018 Staff Share Posted September 14, 2018 A number of people have reported similar issues - sometimes swapping the scaling option corrects it but we've not actually been able to recreate it on site which is frustrating Link to comment Share on other sites More sharing options...
benwiggy Posted September 14, 2018 Share Posted September 14, 2018 3 hours ago, Pauls said: sometimes swapping the scaling option corrects it but we've not actually been able to recreate it on site which is frustrating Yes, changing the scaling option fixes it: even changing it to 99% and then back to 100% fixes it. Changing to "Fit to Printable" also fixes it (even if the % stays at 100.) Switching print queues 'restores' the blank page, even if all the settings are retained. So it's nothing about the settings themselves. It's blank on my HP Laserjet 5200, but works correctly on my HP Color Laserjet 200 M251. Most interesting, I also have two of my own CUPS backends (simple Unix scripts) as print queues: one shows blank, the other works. The only difference between them is the PPD. It's possible that tiny differences in the paper sizes might be a factor? Link to comment Share on other sites More sharing options...
tobnicht Posted September 15, 2018 Share Posted September 15, 2018 The blank page goes away when I DO NOT choose an existing printer preset and switch to Default Settings... Pauls 1 Link to comment Share on other sites More sharing options...
WendoverMan Posted September 17, 2018 Share Posted September 17, 2018 On 9/14/2018 at 1:06 PM, benwiggy said: Yes, changing the scaling option fixes it: even changing it to 99% and then back to 100% fixes it. Changing to "Fit to Printable" also fixes it (even if the % stays at 100.) Switching print queues 'restores' the blank page, even if all the settings are retained. So it's nothing about the settings themselves. It's blank on my HP Laserjet 5200, but works correctly on my HP Color Laserjet 200 M251. Most interesting, I also have two of my own CUPS backends (simple Unix scripts) as print queues: one shows blank, the other works. The only difference between them is the PPD. It's possible that tiny differences in the paper sizes might be a factor? I have the same problem, also with a HP printer, Envy 5646. Get preview and print by changing to 'Fit to Printable' recommended by benwiggy. Link to comment Share on other sites More sharing options...
Staff Pauls Posted September 18, 2018 Staff Share Posted September 18, 2018 Can you let us know if it Is still failing to make a preview in build 128. Link to comment Share on other sites More sharing options...
WendoverMan Posted September 18, 2018 Share Posted September 18, 2018 Yes Pauls, I'm getting fail to preview in build 128. Change to 'Fit to Printable' and there is a preview. Going to print a booklet doesn't work in that printed pages are not all the right way up. I understand there isa problem with print 'models' on a Mac. Thanks. Link to comment Share on other sites More sharing options...
abf Posted September 24, 2018 Author Share Posted September 24, 2018 On 9/14/2018 at 9:47 AM, Pauls said: A number of people have reported similar issues - sometimes swapping the scaling option corrects it but we've not actually been able to recreate it on site which is frustrating Thanks for the tip Paul - I just opened my files in build 133. Still had a blank page when it came to printing on my Samsung CLP 320. However the good news is I tried your scaling suggestion and it worked just fine. The bad news is that it worked only once and when I tried to repeat the exercise using 'command P' publisher didn't respond nor did it activate when I chose print from the menu File > Print . It appears that after the scaling worked once I am frozen out of the print function completely. The only way I could make a repeat print was to quite publisher altogether starting afresh with same scaling dance. Just quitting the window doesn't work and throws up error messages (see attachment). Still loving publisher despite the print glitch ~ Allan Link to comment Share on other sites More sharing options...
2Niels Posted August 1, 2020 Share Posted August 1, 2020 I am still having this problem - no preview, no print. I have tried all of the suggestions above, no luck. Creating a PDF to print is the same - I get a blank PDF. I have just updated to v1.8.3 (was getting same result in previous version too). :( Link to comment Share on other sites More sharing options...
2Niels Posted August 1, 2020 Share Posted August 1, 2020 (edited) Quick update... while saving as PDF through the print dialogue box creates an entirely blank file, 'exporting as PDF' produces the file OK. So at least I have some print functionality! Edited August 1, 2020 by 2Niels Link to comment Share on other sites More sharing options...
Recommended Posts