Rick G Posted May 13, 2018 Share Posted May 13, 2018 New in this beta Many tools will start a bit off screen. If you move them back to where they belong they will stay there until the program restarts Affinity Designer 2.2.2075 & beta 2.3.1.2212 Affinity Photo 2.2.2075 beta 2.3.1.2212Affinity Publisher 2.2.2075 & beta 2.3.1.2212 Windows 11 Pro Version 22H2 OS build 22621.1928 Processor Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz 2.90 GHz Installed RAM 16.0 GB (15.7 GB usable) System type 64-bit operating system, x64-based processor Link to comment Share on other sites More sharing options...
walt.farrell Posted May 13, 2018 Share Posted May 13, 2018 For me, things like a Curves adjustment layer are approximately centered within the Affinity Photo window in the 1.6.5.109 beta, unless I shrink the window vertically to make it significantly smaller vertically. In that case, the adjustment layer box appears partly below the Affinity window, but only when the window is relatively high on the screen. If the window is near the bottom of the screen then the adjustment box is, again, within the window. I don't ever see the box partly off the screen. Question for you: single monitor, or dual? If dual, what configuration? -- Walt Designer, Photo, and Publisher V1 and V2 at latest retail and beta releases PC: Desktop: Windows 11 Pro, version 23H2, 64GB memory, AMD Ryzen 9 5900 12-Core @ 3.00 GHz, NVIDIA GeForce RTX 3090 Laptop: Windows 11 Pro, version 23H2, 32GB memory, Intel Core i7-10750H @ 2.60GHz, Intel UHD Graphics Comet Lake GT2 and NVIDIA GeForce RTX 3070 Laptop GPU. iPad: iPad Pro M1, 12.9": iPadOS 17.4.1, Apple Pencil 2, Magic Keyboard Mac: 2023 M2 MacBook Air 15", 16GB memory, macOS Sonoma 14.4.1 Link to comment Share on other sites More sharing options...
Rick G Posted May 13, 2018 Author Share Posted May 13, 2018 47 minutes ago, walt.farrell said: For me, things like a Curves adjustment layer are approximately centered within the Affinity Photo window in the 1.6.5.109 beta, unless I shrink the window vertically to make it significantly smaller vertically. In that case, the adjustment layer box appears partly below the Affinity window, but only when the window is relatively high on the screen. If the window is near the bottom of the screen then the adjustment box is, again, within the window. I don't ever see the box partly off the screen. Question for you: single monitor, or dual? If dual, what configuration? Single monitor 1920 X 1080 and this issue only started with this beta. I have not shrunk the window from full screen Thanks for the reply Affinity Designer 2.2.2075 & beta 2.3.1.2212 Affinity Photo 2.2.2075 beta 2.3.1.2212Affinity Publisher 2.2.2075 & beta 2.3.1.2212 Windows 11 Pro Version 22H2 OS build 22621.1928 Processor Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz 2.90 GHz Installed RAM 16.0 GB (15.7 GB usable) System type 64-bit operating system, x64-based processor Link to comment Share on other sites More sharing options...
verysame Posted May 13, 2018 Share Posted May 13, 2018 3 hours ago, Rick G said: New in this beta Many tools will start a bit off screen. If you move them back to where they belong they will stay there until the program restarts Same here. Rick G 1 Andrew - Win10 x64 AMD Threadripper 1950x, 64GB, 512GB M.2 PCIe NVMe SSD + 2TB, dual GTX 1080ti Dual Monitor Dell Ultra HD 4k P2715Q 27-Inch Link to comment Share on other sites More sharing options...
Dave Quail Posted May 14, 2018 Share Posted May 14, 2018 Same here, also 1920x1080 resolution Rick G 1 Asus ROG Strix G17 Notebook: AMD Ryzen 7 5800H 3.80 GHz with Radeon Vega Graphics | 32GB DDR4 3200mHz RAM Nvidia GeForce RTX 3060 Ti 8GB Gfx | 2x 2TB SSD NVMe PCIe M.2 3x4 | Windows 11 Version 22H2 Build 22623.870 Link to comment Share on other sites More sharing options...
emmrecs01 Posted May 14, 2018 Share Posted May 14, 2018 Also 1920 x 1080 and on first use I see the same problem. But, if I "correct" the error, close the program and re-open, the adjustments window now appears correct, everything visible. Rick G 1 Win 10 Pro, i7 6700K, 32Gb RAM, NVidia GTX1660 Ti and Intel HD530 Graphics Long-time user of Serif products, chiefly PagePlus and PhotoPlus, but also WebPlus, CraftArtistProfessional and DrawPlus. Delighted to be using Affinity Designer, Photo, and now Publisher, version 1 and now version 2. iPad Pro (12.9") (iOS 17.4) running Affinity Photo and Designer version 1 and all three version 2 apps. Link to comment Share on other sites More sharing options...
Rick G Posted May 14, 2018 Author Share Posted May 14, 2018 1 hour ago, emmrecs01 said: Also 1920 x 1080 and on first use I see the same problem. But, if I "correct" the error, close the program and re-open, the adjustments window now appears correct, everything visible. I was definitely NOT getting that but I just tested and it is apparently performing as you stated. I will watch it a bit more Thanks for the feedback Affinity Designer 2.2.2075 & beta 2.3.1.2212 Affinity Photo 2.2.2075 beta 2.3.1.2212Affinity Publisher 2.2.2075 & beta 2.3.1.2212 Windows 11 Pro Version 22H2 OS build 22621.1928 Processor Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz 2.90 GHz Installed RAM 16.0 GB (15.7 GB usable) System type 64-bit operating system, x64-based processor Link to comment Share on other sites More sharing options...
emmrecs01 Posted May 14, 2018 Share Posted May 14, 2018 6 minutes ago, Rick G said: I was definitely NOT getting that but I just tested and it is apparently performing as you stated. I will watch it a bit more Thanks for the feedback But now, having just tested this again, the adjustments window lower edge is off the screen! Interestingly though, it is not as "far off" the screen as in your screenshot; I can see ALL the graph but not the buttons below the graph. And I've just repeated the test, and 100% of the window is visible!!!!! Win 10 Pro, i7 6700K, 32Gb RAM, NVidia GTX1660 Ti and Intel HD530 Graphics Long-time user of Serif products, chiefly PagePlus and PhotoPlus, but also WebPlus, CraftArtistProfessional and DrawPlus. Delighted to be using Affinity Designer, Photo, and now Publisher, version 1 and now version 2. iPad Pro (12.9") (iOS 17.4) running Affinity Photo and Designer version 1 and all three version 2 apps. Link to comment Share on other sites More sharing options...
Rick G Posted May 14, 2018 Author Share Posted May 14, 2018 15 minutes ago, emmrecs01 said: But now, having just tested this again, the adjustments window lower edge is off the screen! Interestingly though, it is not as "far off" the screen as in your screenshot; I can see ALL the graph but not the buttons below the graph. And I've just repeated the test, and 100% of the window is visible!!!!! They have an issue in here somewhere Affinity Designer 2.2.2075 & beta 2.3.1.2212 Affinity Photo 2.2.2075 beta 2.3.1.2212Affinity Publisher 2.2.2075 & beta 2.3.1.2212 Windows 11 Pro Version 22H2 OS build 22621.1928 Processor Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz 2.90 GHz Installed RAM 16.0 GB (15.7 GB usable) System type 64-bit operating system, x64-based processor Link to comment Share on other sites More sharing options...
Staff Chris J Posted May 15, 2018 Staff Share Posted May 15, 2018 Thanks all, this will be fixed in the next build. Dave Quail and Rick G 2 Link to comment Share on other sites More sharing options...
emmrecs01 Posted May 15, 2018 Share Posted May 15, 2018 Thanks Chris. Good to know it's not a problem being created by my system! Win 10 Pro, i7 6700K, 32Gb RAM, NVidia GTX1660 Ti and Intel HD530 Graphics Long-time user of Serif products, chiefly PagePlus and PhotoPlus, but also WebPlus, CraftArtistProfessional and DrawPlus. Delighted to be using Affinity Designer, Photo, and now Publisher, version 1 and now version 2. iPad Pro (12.9") (iOS 17.4) running Affinity Photo and Designer version 1 and all three version 2 apps. Link to comment Share on other sites More sharing options...
dmstraker Posted June 2, 2018 Share Posted June 2, 2018 I had a similar question, with dialog boxes appearing totally off-screen in two-screen setup. Issue acknowledged and fix promised. Discussion here. Meanwhile, simple action from Chris B for off-adjustment panel appearing off-screen: Call the dialog Immediately press Alt+Space Press M Press an arrow key on the keyboard Move your mouse around Dave Straker Cameras: Sony A7R2, RX100V Computers: Win10: Chillblast i9 Custom + Philips 40in 4K & Benq 23in; Surface Pro 4 i5; iPad Pro 11" Favourite word: Aha. For me and for others. Link to comment Share on other sites More sharing options...
Recommended Posts