chilly7 Posted September 12, 2017 Posted September 12, 2017 I am pretty novice in vector desing but this feature i really needed and used in Adobe Illustrator. And i just downloaded a demo of Affinity Designer and cannot find it? How to do this is Affinity Designer? P.s. Manual tracing is out of question at the moment! I need automatic similarly to High Fidelity photo in Adobe Illustrator. Quote My Facebook: https://www.facebook.com/sashawholovesGod . My Youtube: https://youtube.com/777chillyy777 . Apple Mac Pro late 2013-> Nec PA 272W.
Staff Callum Posted September 12, 2017 Staff Posted September 12, 2017 There is no automatic tracing in Affinity Designer I'm afraid. This is something that may be added in a future version C AffinityAppMan 1 Quote Please tag me using @ in your reply so I can be sure to respond ASAP.
chilly7 Posted September 12, 2017 Author Posted September 12, 2017 1 hour ago, Callum said: There is no automatic tracing in Affinity Designer I'm afraid. This is something that may be added in a future version C Yes, that very sad. I really need that feature. So un till then i guess i will stick to Adobe Illustrator. Any idea when it comes to Affinity Desgner? Quote My Facebook: https://www.facebook.com/sashawholovesGod . My Youtube: https://youtube.com/777chillyy777 . Apple Mac Pro late 2013-> Nec PA 272W.
ChrisP Posted September 12, 2017 Posted September 12, 2017 Well you could always use Inkscape (free) to image trace and then bring it in to Affinity Designer Quote
chilly7 Posted September 12, 2017 Author Posted September 12, 2017 11 minutes ago, ChrisP said: Well you could always use Inkscape (free) to image trace and then bring it in to Affinity Designer I do not trust free software because usually they are not the best quality! Quote My Facebook: https://www.facebook.com/sashawholovesGod . My Youtube: https://youtube.com/777chillyy777 . Apple Mac Pro late 2013-> Nec PA 272W.
MikeW Posted September 12, 2017 Posted September 12, 2017 1 hour ago, chilly7 said: I do not trust free software because usually they are not the best quality! And yet there isn't anything to lose trying InkScape except a little time. Or, because Serif has stated they only plan on releasing a trace routine if it meets expectations and is comparable to what can be considered the best, you could always go plunk down the cash for Vector Magic. At least it isn't free... verysame, siafok, nikolai.ylirotu and 5 others 5 3 Quote
R C-R Posted September 12, 2017 Posted September 12, 2017 1 hour ago, chilly7 said: I do not trust free software because usually they are not the best quality! Then you should not trust paid software like Affinity or many others either, because they include open source "backend" software code that is distributed under a variety of no-cost licenses. Inkscape is one of the many apps that uses the Potrace algorithm for auto-tracing -- if you would find that algorithm more worthy of your trust if you had to pay to use it, there are several paid apps that use it for that. siafok, Steps, Migs and 3 others 6 Quote All 3 1.10.8, & all 3 V2.5.7 Mac apps; 2020 iMac 27"; 3.8GHz i7, Radeon Pro 5700, 32GB RAM; macOS 10.15.7 All 3 V2 apps for iPad; 6th Generation iPad 32 GB; Apple Pencil; iPadOS 15.7
chilly7 Posted September 14, 2017 Author Posted September 14, 2017 On 12.09.2017 at 11:29 PM, MikeW said: And yet there isn't anything to lose trying InkScape except a little time. Or, because Serif has stated they only plan on releasing a trace routine if it meets expectations and is comparable to what can be considered the best, you could always go plunk down the cash for Vector Magic. At least it isn't free... That is the case. I do not want to lose time! I want to do many wonderful things!!! And time is a problem for me. Adobe Illustrator is expansive for me so i am looking for alternative but with the best quality. I do unprofitable work so i do not make money out of my work so that's is a problem for me to pay that much money out of Adobe subscription plan. Who is Serif? pixelramen 1 Quote My Facebook: https://www.facebook.com/sashawholovesGod . My Youtube: https://youtube.com/777chillyy777 . Apple Mac Pro late 2013-> Nec PA 272W.
Staff MEB Posted September 14, 2017 Staff Posted September 14, 2017 Hi chilly7, Welcome to Affinity Forums Serif is the company that develops the Affinity line of products (currently Affinity Designer and Affinity Photo). marcdraco 1 Quote A Guide to Learning Affinity Software
chilly7 Posted September 14, 2017 Author Posted September 14, 2017 On 13.09.2017 at 1:17 AM, R C-R said: Then you should not trust paid software like Affinity or many others either, because they include open source "backend" software code that is distributed under a variety of no-cost licenses. Inkscape is one of the many apps that uses the Potrace algorithm for auto-tracing -- if you would find that algorithm more worthy of your trust if you had to pay to use it, there are several paid apps that use it for that. Open souce is a good thing because it alows other developers to create addons to the vanilla version. P.s. Free staff is usually a crap or at best not the best, however there are might be exceptions. For example all my art i do is totaly free. And i have spend alot of work to do that and i was trying to do it the best i can. I do not make any money out of it. But i just want to do something beautiful to the world. Quote My Facebook: https://www.facebook.com/sashawholovesGod . My Youtube: https://youtube.com/777chillyy777 . Apple Mac Pro late 2013-> Nec PA 272W.
chilly7 Posted September 14, 2017 Author Posted September 14, 2017 Just now, MEB said: Serif is the company that develops the Affinity line of products (currently Affinity Designer and Affinity Photo). Thank you. Did there were mentioned any time line for image tracing? Quote My Facebook: https://www.facebook.com/sashawholovesGod . My Youtube: https://youtube.com/777chillyy777 . Apple Mac Pro late 2013-> Nec PA 272W.
Staff MEB Posted September 14, 2017 Staff Posted September 14, 2017 Hi chilly7, No, there's no eta for the auto-trace functionality. It will be only released if/when the dev team is happy with its output/quality. pixelramen 1 Quote A Guide to Learning Affinity Software
chilly7 Posted September 14, 2017 Author Posted September 14, 2017 11 minutes ago, MEB said: Hi chilly7, No, there's no eta for the auto-trace functionality. It will be only released if/when the dev team is happy with its output/quality. I see. P.s. Hopefully it will be on pair or better then Adobe Illustrator!!! Quote My Facebook: https://www.facebook.com/sashawholovesGod . My Youtube: https://youtube.com/777chillyy777 . Apple Mac Pro late 2013-> Nec PA 272W.
R C-R Posted September 14, 2017 Posted September 14, 2017 1 hour ago, chilly7 said: P.s. Hopefully it will be on pair or better then Adobe Illustrator!!! I have no direct experience with this, but some forum users have mentioned that Inkscape (which I believe uses Potrace as its auto-tracing engine) generally produces better results than Illustrator. Personally, I have never found an app I can afford that provides an auto-trace function that outputs vectorized files formatted & layered in any way I would find very useful for my purposes. Usually, the raster image has either high enough pixel resolution to begin with that I can use it as is, or the resolution is too low to produce a version that looks good when vectorized & scaled up & added to my project, so I end up manually tracing it anyway. pixelramen 1 Quote All 3 1.10.8, & all 3 V2.5.7 Mac apps; 2020 iMac 27"; 3.8GHz i7, Radeon Pro 5700, 32GB RAM; macOS 10.15.7 All 3 V2 apps for iPad; 6th Generation iPad 32 GB; Apple Pencil; iPadOS 15.7
gdenby Posted September 14, 2017 Posted September 14, 2017 Hi, chilly7 You really might want to try Inkscape. I've used it on Macs off and on for years. It must run under X11 windowing system developed for graphic display in Unix systems, so the performance is less than perfect, but acceptable. The interface is also somewhat clumsy. But all the functions I've tried worked well. I've had reasonably good results. I haven't tried any color traces w. more than 16 colors, and the photos were carefully smoothed, unlike what is shown in the Illustrator tute. But the results still produced thousands of paths. For the kind of work I tend to do, deleting tiny specks of color, or tweaking hundreds of nodes to ensure nice smooth paths, is almost too much. I would find photo resolution traces almost useless. Why would I want to produce a vector image that is almost a big as the photo, and when enlarged, will have similar visually distracting detail. nikolai.ylirotu 1 Quote iMac 27" Retina, c. 2015: OS X 10.11.5: 3.3 GHz I c-5: 32 Gb, AMD Radeon R9 M290 2048 Mb iPad 12.9" Retina, iOS 10, 512 Gb, Apple pencil Huion WH1409 tablet
Alfred Posted September 14, 2017 Posted September 14, 2017 On 12/09/2017 at 9:04 PM, chilly7 said: I do not trust free software because usually they are not the best quality! Did you pay for your web browser? nikolai.ylirotu, siafok, pixelramen and 7 others 4 1 5 Quote Alfred Affinity Designer/Photo/Publisher 2 for Windows • Windows 10 Home/Pro Affinity Designer/Photo/Publisher 2 for iPad • iPadOS 17.5.1 (iPad 7th gen)
AffinityAppMan Posted January 30, 2018 Posted January 30, 2018 We really need an Image Trace feature in Affinity Designer. This will bring a lot more people from Adobe Illustrator to Affinity Designer. marcdraco, meitnik and p10n 3 Quote
v_kyr Posted January 30, 2018 Posted January 30, 2018 Actually you have to take some third party tool for tracing here, like for example: potrace DragPotrace autotrace Inkscape MS Expression Design 4 Super Vectorizer Image Vectorizer Vector Magic ...and so on... Quote ☛ Affinity Designer 1.10.8 ◆ Affinity Photo 1.10.8 ◆ Affinity Publisher 1.10.8 ◆ OSX El Capitan ☛ Affinity V2.3 apps ◆ MacOS Sonoma 14.2 ◆ iPad OS 17.2
AffinityAppMan Posted January 30, 2018 Posted January 30, 2018 1 hour ago, v_kyr said: Actually you have to take some third party tool for tracing here, like for example: potrace DragPotrace autotrace Inkscape MS Expression Design 4 Super Vectorizer Image Vectorizer Vector Magic ...and so on... I understand, but Adobe Illustrator has it in the program. No need for third party apps. Designer will be better with an image tracing persona. Cheers Quote
v_kyr Posted January 30, 2018 Posted January 30, 2018 2 minutes ago, AffinityAppMan said: I understand, but Adobe Illustrator has it in the program. No need for third party apps. Designer will be better with an image tracing persona. Of course it would, but since it doesn't have one and you don't want to wait endlessly for an embedded one, you have to look around elsewhere if you need such functionality now and yet. Quote ☛ Affinity Designer 1.10.8 ◆ Affinity Photo 1.10.8 ◆ Affinity Publisher 1.10.8 ◆ OSX El Capitan ☛ Affinity V2.3 apps ◆ MacOS Sonoma 14.2 ◆ iPad OS 17.2
Scott Prock Posted May 15, 2018 Posted May 15, 2018 I understand this is an old thread, but I just tried to install Inkscape onto MacOS 10.11.6 (El Capitan) via Homebrew (command line) and would not recommend that route to MacOS users. After issuing the command to install Inkscape, the computer downloaded about 50 dependencies but didn't finish with a working copy. There were about 5 errors, and I don't know enough about the process to try and troubleshoot or fix. Now I have a bunch of dependencies junking up my computer and no Inkscape. I can whole heartily understand the OP's hesitation to use free software. Had I known I would end up filling my computer with a bunch of useless programs I would not have done this. Also, who knows if what was installed will cause issues later down the road. UGH!!! Quote
Jan Gaare Posted May 28, 2018 Posted May 28, 2018 so without tracing it proves itself to not so usefull, no arrows is not esential, but no tracing, hopeless... John Rostron 1 Quote
Staff MEB Posted May 28, 2018 Staff Posted May 28, 2018 Hi Jan Gaare, Welcome to Affinity Forums We do have plans to add a tracing tool assuming we are able to get the output quality we are aiming for. Meanwhile there's quite a few utilities you can use (some of them quite good) to trace images. You can then open the result file in Affinity and work from there. pixelramen, Steps, dangerman2000 and 1 other 4 Quote A Guide to Learning Affinity Software
R C-R Posted May 28, 2018 Posted May 28, 2018 19 minutes ago, Jan Gaare said: so without tracing it proves itself to not so usefull, no arrows is not esential, but no tracing, hopeless... It is not hopeless unless you insist on doing everything in one app. If not, as has been mentioned many times in these discussions there are quite a few good alternatives, including several free ones, that can be used with Affinity Designer (& Photo) to provide that function. marcdraco, pixelramen and Steps 3 Quote All 3 1.10.8, & all 3 V2.5.7 Mac apps; 2020 iMac 27"; 3.8GHz i7, Radeon Pro 5700, 32GB RAM; macOS 10.15.7 All 3 V2 apps for iPad; 6th Generation iPad 32 GB; Apple Pencil; iPadOS 15.7
SrPx Posted May 28, 2018 Posted May 28, 2018 What is hopeless is a tracing non optimized like in that (and the narrator still calls it "successfully converted) video, that's useless. You can refine the vectorization in most softwares, but coming to a really elegant result takes almost the same trial and error time than the time used in just proper hand tracing. Inkscape, with some research on your side (just find your ideal settings for most projects, i've used it for some fast silhouettes for 3D extrusions in Blender of imported as SVGs), as has one of the best tracers embedded, Potrace (more flexible in its command line form, tho, but harder to use for the average joe), and an easy UI for it inside Inkscape, is among the best options, and it is free. You will find your self tracing there and doing every thing else in AD, as, no offense to the great Inkscape, AD is quite superior. Most work should not be based on auto tracing, for the usual design workload, although there are very specific exceptions. If your work is so much focused on that, I'd research heavily in the command line usage of Potrace. Quote AD, AP and APub V2.5.x. Windows 10 and Windows 11.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.