altae Posted August 27, 2017 Share Posted August 27, 2017 This beta works very well for me. It looks like you are finally approaching a new stable release Link to comment Share on other sites More sharing options...
WMax70 Posted August 27, 2017 Share Posted August 27, 2017 Working with Layers and brushes is completely messing up now. Used Brushes (light rays). Wanted to see the difference with and w/o. Here i show this is messing up. Only the last merged layer is shown or the brushes, but the original layer w/o the brushes does not appear anymore. :-( -> Real - Estate brochure photography. Link to comment Share on other sites More sharing options...
Mark Ingram Posted August 27, 2017 Author Share Posted August 27, 2017 7 hours ago, carl123 said: Bug (windows 8.0) Open any image Add an adjustment (e,g, exposure) Can't switch off image in layers panel i.e. has no effect until you zoom in or out Same with shapes etc Seems to be a problem when adding adjustment EDIT: Now happening in documents without any adjustment layer(s) Hi, I know the cause of this, and will have it fixed in the next version. verysame 1 Link to comment Share on other sites More sharing options...
Mark Ingram Posted August 27, 2017 Author Share Posted August 27, 2017 3 hours ago, WMax70 said: Started perfomance testing for langer real estate work. ... I think serious performance increase is possible just by enabling the use of more cores. Hi, we do scale across all cores in your system, though it can depend on the operation that you're performing. Because there are interactions between the code that runs on each core, it means that cores can end up waiting for others to complete. What test were you performing? Link to comment Share on other sites More sharing options...
c_moon Posted August 27, 2017 Share Posted August 27, 2017 7 hours ago, dominik said: I just followed your steps (under Windows 10) and can switch off the image layer with no problem. Do you mean switching off by unticking at the very right end of the layer? d. I'm getting this problem under Windows 10. If I add an B&W adjustment layer (for example) to a background layer I can turn the adjustment layer off and on but with the background layer I have to use the zoom tool (only one I've tried) after unticking or ticking the background layer visibility in order for it to change the visibility. Link to comment Share on other sites More sharing options...
harrym Posted August 27, 2017 Share Posted August 27, 2017 Just finished a 44" Pano,..... Lovely jubbly Link to comment Share on other sites More sharing options...
verysame Posted August 27, 2017 Share Posted August 27, 2017 3 hours ago, c_moon said: I'm getting this problem under Windows 10. If I add an B&W adjustment layer (for example) to a background layer I can turn the adjustment layer off and on but with the background layer I have to use the zoom tool (only one I've tried) after unticking or ticking the background layer visibility in order for it to change the visibility. It seems Mark knows already about this bug and he is going to fix it in the next beta: Andrew - Win10 x64 AMD Threadripper 1950x, 64GB, 512GB M.2 PCIe NVMe SSD + 2TB, dual GTX 1080ti Dual Monitor Dell Ultra HD 4k P2715Q 27-Inch Link to comment Share on other sites More sharing options...
crlogic Posted August 28, 2017 Share Posted August 28, 2017 Batch jobs are ignoring the JPEG ICC Profile option. Running this on a number of AdobeRGB TIFF's exports AdobeRGB JPEG's Link to comment Share on other sites More sharing options...
Tom G Posted August 28, 2017 Share Posted August 28, 2017 The Highlight and shadow sliders are needing some attention they just don't work very well will they be fixed in the next version as I edit a lot of photos the highlight/shadow is C-R-P to say the least I use Affinity latest version and have now moved to On1 Photo Raw for editing my raw files just works so much better but I want to use Affinity for other uses so please look at this problem I use win 10 64bit and high speck laptop 64gig ram Nivida 980 graphics i7 6820H processor so nothing wrong with my hardware Thanks Tom G Scotland Link to comment Share on other sites More sharing options...
Chris_K Posted August 29, 2017 Share Posted August 29, 2017 10 hours ago, crlogic said: Batch jobs are ignoring the JPEG ICC Profile option. Running this on a number of AdobeRGB TIFF's exports AdobeRGB JPEG's H crlogic This is a general issue that affects both platforms, this has been logged Cheers anon1 1 Serif Europe Ltd - Check the latest news at www.affinity.serif.com Link to comment Share on other sites More sharing options...
newty Posted August 29, 2017 Share Posted August 29, 2017 When the document is closed, the application hangs. The image disappears, but the panel with a cross is closed. me to when i open two pictures or to .afphoto (with layers) and want to close one of them its impossible ! wait wait wait and force ( with "ctr+alt+del")because "affinity"not responding and lost all work not exceptionnal but every time .... win 7 x64 16go i5 thanks Link to comment Share on other sites More sharing options...
newty Posted August 29, 2017 Share Posted August 29, 2017 i have uninstalled properly all version affinity (folders registry key etc ) but noting to do ..... Link to comment Share on other sites More sharing options...
Nizza Posted August 29, 2017 Share Posted August 29, 2017 All the betas have not been to bad, until this one. I open a file, close it and the program freezes. After opening the program 4 to 5 times it will not open anymore. Link to comment Share on other sites More sharing options...
crlogic Posted August 30, 2017 Share Posted August 30, 2017 22 hours ago, newty said: When the document is closed, the application hangs. The image disappears, but the panel with a cross is closed. me to when i open two pictures or to .afphoto (with layers) and want to close one of them its impossible ! wait wait wait and force ( with "ctr+alt+del")because "affinity"not responding and lost all work not exceptionnal but every time .... win 7 x64 16go i5 thanks While not every time as noted above, this happens 75% of the time for me. Link to comment Share on other sites More sharing options...
WMax70 Posted August 30, 2017 Share Posted August 30, 2017 On 27-8-2017 at 9:32 PM, Mark Ingram said: Hi, we do scale across all cores in your system, though it can depend on the operation that you're performing. Because there are interactions between the code that runs on each core, it means that cores can end up waiting for others to complete. What test were you performing? For speed testing I used : Cinebench and saw in speeds tests online that they used Adobe Photoshop for tests. What I did is a photo stacking test and when done just curves, live high pass filter. The PC often shows, "pc is not reacting". So I have to wait until the processing is finished. In my experience, this is nothing faster on any of my PC's I have hardly any noticeable speed difference. If you compare it into eg cinebench, or on Adobe you'll see noticeable rendering difference so there is a serious difference the way they access / use the processor performance. Link to comment Share on other sites More sharing options...
crlogic Posted August 31, 2017 Share Posted August 31, 2017 Filters --> Apply Image --> check Equations box Problem: Equation Color Space boxes are "empty" until you click on them (per the screenshot). Link to comment Share on other sites More sharing options...
Staff Sean P Posted August 31, 2017 Staff Share Posted August 31, 2017 6 hours ago, crlogic said: Filters --> Apply Image --> check Equations box Problem: Equation Color Space boxes are "empty" until you click on them (per the screenshot). Thanks for that - it looks to be a text colour issue when using Light UI. I'll get it passed onto development. Link to comment Share on other sites More sharing options...
altae Posted August 31, 2017 Share Posted August 31, 2017 Found a few bugs. The Inpainting Brush Tool only works if "Current Layer" is chosen as source. Choosing "Current Layer & Below" does nothing. And under some circumstances (unfortunately I cannot say what conditions must be fulfilled) the Info Panel does not show any info. I've attached a screenshot of the concerned photo. P.S. The cursor was within the image while I was taking the screenshot. The info concerning the values of the different color channels should definitely have been shown just as they normally are if I place the cursor within an image. Link to comment Share on other sites More sharing options...
Staff Sean P Posted August 31, 2017 Staff Share Posted August 31, 2017 50 minutes ago, altae said: Found a few bugs. The Inpainting Brush Tool only works if "Current Layer" is chosen as source. Choosing "Current Layer & Below" does nothing. And under some circumstances (unfortunately I cannot say what conditions must be fulfilled) the Info Panel does not show any info. I've attached a screenshot of the concerned photo. P.S. The cursor was within the image while I was taking the screenshot. The info concerning the values of the different color channels should definitely have been shown just as they normally are if I place the cursor within an image. The Inpainting issue is a known problem and has been reported to development. Regarding the Info Panel it looks as though you've removed any samplers from your document. If you click the Panel Preferences button clicking 'Add New Sampler' does that help? However you should at least see some dashes under W,H,D and A without any samplers. Link to comment Share on other sites More sharing options...
altae Posted August 31, 2017 Share Posted August 31, 2017 Thanks for your reply. Adding samplers has indeed fixed the problem. My bad, maybe I accidentally removed them without noticing it. Link to comment Share on other sites More sharing options...
Kaze Posted August 31, 2017 Share Posted August 31, 2017 I have a lot of crashes using inpainting tool on large areas. Link to comment Share on other sites More sharing options...
Staff Sean P Posted September 1, 2017 Staff Share Posted September 1, 2017 10 hours ago, Kaze said: I have a lot of crashes using inpainting tool on large areas. Are you able to attach an image you are trying to inpaint (also what area of the image) so we can try and reproduce it please? Link to comment Share on other sites More sharing options...
crlogic Posted September 3, 2017 Share Posted September 3, 2017 I get a crash a third of the time when I go File --> Export. I sent in a bug report using the popup reporter after it crashes. Link to comment Share on other sites More sharing options...
Staff Sean P Posted September 5, 2017 Staff Share Posted September 5, 2017 On 9/3/2017 at 3:27 PM, crlogic said: I get a crash a third of the time when I go File --> Export. I sent in a bug report using the popup reporter after it crashes. This is a known issue and has been fixed for the next beta. Link to comment Share on other sites More sharing options...
crlogic Posted September 5, 2017 Share Posted September 5, 2017 12 hours ago, Sean P said: This is a known issue and has been fixed for the next beta. Thanks! Can't wait for the next beta, this revision has been one of the less stable builds so far. Appreciate the hard work and letting us feel the pain Link to comment Share on other sites More sharing options...
Recommended Posts