Staff MattP Posted August 31, 2017 Author Staff Share Posted August 31, 2017 38 minutes ago, Nguyen Ha said: I can use it normally in Adobe CC and AD&AF 1.5. If 1.6 version does not accept it, I have to switch back to Adobe We're looking into this at the moment... There's definitely something wrong with these fonts (the PostScript name doesn't match the name reported by the system) but we don't like to introduce regressions or remove functionality unless necessary... We'll get back to you soon! (thanks for including the font files, it makes it much easier!) Edit: Can I ask what the workaround you found is? Link to comment Share on other sites More sharing options...
Nguyen Ha Posted August 31, 2017 Share Posted August 31, 2017 3 hours ago, MattP said: We're looking into this at the moment... There's definitely something wrong with these fonts (the PostScript name doesn't match the name reported by the system) but we don't like to introduce regressions or remove functionality unless necessary... We'll get back to you soon! (thanks for including the font files, it makes it much easier!) Much appreciate if you can fix it, for now I have to rename one by one and install to Font Book again. I have used Adobe for two weeks and miss the smoothness of AD so much. Detail: http://www.iwebss.com/tech/540-fixing-fonts-with-validation-errors-on-mac MattP 1 Link to comment Share on other sites More sharing options...
Tekikou Posted August 31, 2017 Share Posted August 31, 2017 I really try to work with symbols, but whenever I do, after a single modification (in this case a simple colour update), all instances of that symbol are not synced and got the "dotted" style in the layers list… What's the point of a symbol if all its instances are not synced accordingly? I have that particular issue since the first introduction of symbols (1.5 if I recall correctly). This is so frustrating, I have to drag & drop the symbol all over again in my 10 artboards… To clarify, my symbols are getting synced for a short time (presumably), when I create a symbol, I dispose some instances in artboards, they are synced. But after a little while, if I decide to change something on the original symbol (or any instances actually), bam, they are not synced anymore. I don't know when they stopped being synced (maybe at the exact same moment the change occurs?) because I usually work on large files with lots of artboards, I'm not constantly checking if my symbols instances are still synced. Link to comment Share on other sites More sharing options...
Tekikou Posted September 1, 2017 Share Posted September 1, 2017 I guys, it's me again for another bug This time it's a systematic crash while turning on the retina pixel view mode. Steps to reproduce: • Open the attached .afdesign file • Turn on the Retina pixel view mode crashFile.afdesign Link to comment Share on other sites More sharing options...
Staff MattP Posted September 1, 2017 Author Staff Share Posted September 1, 2017 8 minutes ago, Tekikou said: I guys, it's me again for another bug This time it's a systematic crash while turning on the retina pixel view mode. Steps to reproduce: • Open the attached .afdesign file • Turn on the Retina pixel view mode crashFile.afdesign *sigh* it works completely perfectly for me, no crash... Can I ask what operating system and view mode you're using? I've tried both Metal and OpenGL on Sierra and it's working fine. To be honest, I can't think of a single reason why 'retina pixel view mode' would crash anything, it's not doing anything other than drawing the document which it already did to show you anything in the first place! It's more likely that it's some kind of UI-related issue... Are you using light mode/dark mode? What happens if you restart Designer while holding the Ctrl key to reset everything - do you still get the problem? Thanks again! Matt Tekikou 1 Link to comment Share on other sites More sharing options...
Tekikou Posted September 1, 2017 Share Posted September 1, 2017 41 minutes ago, MattP said: *sigh* it works completely perfectly for me, no crash... Can I ask what operating system and view mode you're using? I've tried both Metal and OpenGL on Sierra and it's working fine. To be honest, I can't think of a single reason why 'retina pixel view mode' would crash anything, it's not doing anything other than drawing the document which it already did to show you anything in the first place! It's more likely that it's some kind of UI-related issue... Are you using light mode/dark mode? What happens if you restart Designer while holding the Ctrl key to reset everything - do you still get the problem? Thanks again! Matt Hi Matt! Resetting everything did the trick! Thanks MattP 1 Link to comment Share on other sites More sharing options...
Tekikou Posted September 1, 2017 Share Posted September 1, 2017 Hey @MattP, I was able to reproduce it even with cleared settings! You have to set Display to "Metal" and Retina Rendering to "High quality (slowest)" in the preferences. Check out this video: AffinityCrash.mp4 And the corresponding crashlog: crashlog.txt Link to comment Share on other sites More sharing options...
Staff MattP Posted September 1, 2017 Author Staff Share Posted September 1, 2017 2 minutes ago, Tekikou said: Hey @MattP, I was able to reproduce it even with cleared settings! Check out this video: AffinityCrash.mp4 And the corresponding crashlog: crashlog.txt Thank you! I suspect the important bit is that you chose the 'High quality' retina rendering - that's more likely to be the culprit... What happens if you don't choose that option? It will have no effect on the quality of the rendered result in the view, but it does have an effect on what happens when you move things around... But the Metal view actually has something very fancy in its pixel shader that means there's actually very little benefit for choosing the 'High quality' option and in most cases it just amounts to a slower document draw for no benefit... I may well take it out when you've got the Metal view mode on... Thanks, Matt Link to comment Share on other sites More sharing options...
Tekikou Posted September 1, 2017 Share Posted September 1, 2017 5 minutes ago, MattP said: Thank you! I suspect the important bit is that you chose the 'High quality' retina rendering - that's more likely to be the culprit... What happens if you don't choose that option? It will have no effect on the quality of the rendered result in the view, but it does have an effect on what happens when you move things around... But the Metal view actually has something very fancy in its pixel shader that means there's actually very little benefit for choosing the 'High quality' option and in most cases it just amounts to a slower document draw for no benefit... I may well take it out when you've got the Metal view mode on... Thanks, Matt With that option to "Automatic (best)", the app is not crashing, but the view gets really messy at 300% of zoom. Link to comment Share on other sites More sharing options...
Staff MattP Posted September 1, 2017 Author Staff Share Posted September 1, 2017 Between 200% and 400% there's something going wrong with Retina Pixel Preview turned on... I'm looking into it! Thanks! Figmatt, Patrick Connor and Tekikou 3 Link to comment Share on other sites More sharing options...
lepr Posted September 1, 2017 Share Posted September 1, 2017 . Link to comment Share on other sites More sharing options...
Timber Posted September 2, 2017 Share Posted September 2, 2017 Completely hosed. No tools, no Studio panels, cannot create New Document, really odd behavior, this and the current build of AP Mac too behave this way on OS X 10.9.5 Mac, early versions of Betas were fine, current release App store builds run fine. Just these last betas of AD and AP Mac. - Timber Link to comment Share on other sites More sharing options...
Oval Posted September 2, 2017 Share Posted September 2, 2017 9 hours ago, Timber said: No tools, no Studio panels, cannot create New Document, really odd behavior Yes, this will hopefully be corrected in beta 9, which was "announced” for this week. Link to comment Share on other sites More sharing options...
Timber Posted September 2, 2017 Share Posted September 2, 2017 Hi Oval, I missed that announcement. Glad to hear it's a known issue and being worked on. Cheers – Timber Link to comment Share on other sites More sharing options...
Bri-Toon Posted September 3, 2017 Share Posted September 3, 2017 This is nothing urgent. It's just for the awareness. In random cases when joining paths together, the stroke size increases. Some times by little, some times by a lot. 20170903134735(1).mov With that said, I know I've been quite active on the Designer beta topics and have been reporting every little thing I found. While I know that's the point, I hope I ain't driving ya crazy. Haha. A_B_C, Alfred and MattP 3 The website is still a work in progress. The "Comics" and "Shop" sections are not yet ready. Feel free to connect with me and let me know what you like or what can be improved. You can contact me here, on my contact page, YouTube channel, or Twitter account. Thanks and have a great day! Link to comment Share on other sites More sharing options...
A_B_C Posted September 3, 2017 Share Posted September 3, 2017 I think this is the most valuable thing you can do, Brian, from a developer’s perspective … MattP, Alfred and Bri-Toon 3 Link to comment Share on other sites More sharing options...
Bri-Toon Posted September 3, 2017 Share Posted September 3, 2017 Thanks. I love how I'm always the last person I think of. And yes, now I'm bragging. A_B_C 1 The website is still a work in progress. The "Comics" and "Shop" sections are not yet ready. Feel free to connect with me and let me know what you like or what can be improved. You can contact me here, on my contact page, YouTube channel, or Twitter account. Thanks and have a great day! Link to comment Share on other sites More sharing options...
A_B_C Posted September 4, 2017 Share Posted September 4, 2017 Link to comment Share on other sites More sharing options...
viterzbayraku Posted September 5, 2017 Share Posted September 5, 2017 On OS X 10.8.5 does not work: File -> New menu item (Doing nothing) Tools panel is empty Toolbar Panel empty after trying to customize Link to comment Share on other sites More sharing options...
Bri-Toon Posted September 5, 2017 Share Posted September 5, 2017 I found a very strange bug. In this particular pixel layer, I cannot sketch pass a certain point. It acts as if I have a crop mask. I also cannot be drawing behind anything, because there is only one layer above, and it's hidden. 20170905140054(1).mov Here is the file if anyone wants to take a look. I don't think I'm overlooking anything. 3 Contents 1.afdesign The website is still a work in progress. The "Comics" and "Shop" sections are not yet ready. Feel free to connect with me and let me know what you like or what can be improved. You can contact me here, on my contact page, YouTube channel, or Twitter account. Thanks and have a great day! Link to comment Share on other sites More sharing options...
lepr Posted September 5, 2017 Share Posted September 5, 2017 . Link to comment Share on other sites More sharing options...
A_B_C Posted September 6, 2017 Share Posted September 6, 2017 I have the suspicion that you rescaled the document, Brian, and continued to paint on the original pixel layer. By the way, I found a strange redrawing bug (non-Metal) by checking this out. Also the “Anchor to Page” parameter doesn’t seem to have an effect in the case of pixel layers (or rather the pixel canvases). Hmm. See my video. Redraw.mov Link to comment Share on other sites More sharing options...
Oval Posted September 6, 2017 Share Posted September 6, 2017 23 hours ago, viterzbayraku said: File -> New menu item (Doing nothing) Tools panel is empty Toolbar Panel empty after trying to customize should already be known since two weeks*, but no solution *an older report was deleted Link to comment Share on other sites More sharing options...
Bri-Toon Posted September 6, 2017 Share Posted September 6, 2017 15 hours ago, owenr said: Brian, I don't know how the layer became corrupted but it can be repaired by Rasterize. That's strange. That seems to do the trick. 6 hours ago, A_B_C said: I have the suspicion that you rescaled the document, Brian, and continued to paint on the original pixel layer. By the way, I found a strange redrawing bug (non-Metal) by checking this out. Also the “Anchor to Page” parameter doesn’t seem to have an effect in the case of pixel layers (or rather the pixel canvases). Hmm. See my video. Redraw.mov That's a good catch, but I don't think it's the case here since I didn't resize the document. I'm making a book, so I need each page on the default page preset (Letter). The website is still a work in progress. The "Comics" and "Shop" sections are not yet ready. Feel free to connect with me and let me know what you like or what can be improved. You can contact me here, on my contact page, YouTube channel, or Twitter account. Thanks and have a great day! Link to comment Share on other sites More sharing options...
lepr Posted September 6, 2017 Share Posted September 6, 2017 . Link to comment Share on other sites More sharing options...
Recommended Posts