larsh Posted April 18, 2017 Share Posted April 18, 2017 No, there is another problem. I try to synchronisate tablet and AP. 1. AP on my mac show another white (a very little warmer, may be few yellow) as my tablet. 2. especially bright sky blue on the tablet looks in AP blue-cyan/ green. Calibrate the tablet (note 10.1, Artflow with sRGB...2.1 too now) is as I know not possible (there is a little tool in the settings without real changing); the apps I know only change all the white/ gray and so the canvas. Is there a way to calibrate AP in the mac without hardware; doing it inside the mac I am not able... Regards lars Quote all Aff 2.2: Capture One+ 23 pro; MacBook Pro, OSX 10.15.7, Fuji X-Pro2 Link to comment Share on other sites More sharing options...
Staff Lee D Posted April 19, 2017 Staff Share Posted April 19, 2017 Hi lars, If you open Affinity Photo and go Preferences > Colour you can set the default colour profiles. It may also be worth checking your Mac's System Preferences > Display to see what colour profile is selected. Quote Link to comment Share on other sites More sharing options...
larsh Posted April 19, 2017 Author Share Posted April 19, 2017 Thanks Lee. That is not the problem, AP is set to sRGB...2.1. Some of the pics made in tablet/ Artflow had no icc, AP includes it then. And to AP is to say the colors here and in the prints go much better together than with the tablet screen. And there is my problem: The screen/ canvas of the tablet is more white than in mac/ AP. The only way to help could be to change not the mac but the working space-white in AP (or on the tablet screen). I don´t see a way... To change the mac with the mac-tool – I can´t, allways the system calibration is better than mine. So the problem is with the tablet where I see a good sky-blue and in AP and the print it is cyan. The world continues to go arround if the pic must get the finish in AP. But here are the specialists. Best regards lars Quote all Aff 2.2: Capture One+ 23 pro; MacBook Pro, OSX 10.15.7, Fuji X-Pro2 Link to comment Share on other sites More sharing options...
SunRiseMoon Posted April 19, 2017 Share Posted April 19, 2017 Wenn Du aus Berlin bist, wirst Du vielleicht eine Antwort auf deutsch auch verstehen. Ich lebe ja nicht in der Apfelwelt, doch ich habe 2 EIZO CG241W an 2 Rechnern mit Win und derselben Grafikkarte, bei hardwarekalibriert , früher Spyder 3, jetzt mit dem Spyder5 pro. Die stehen nebeneinander und zeigen unterschiedliche Farbnuancen. Einen Vergleich mit irgendwelchen schlichteren Displays ziehe ich ja gar nicht. Ich habe bei einer Canon-Roadshow einen Vertreter von Eizo darauf angesprochen und der meinte, dass, wenn man wirklich möglichst identische Farben auf 2 Monitoren haben will, solche Paare nach der Produktion entsprechend handverlesen ausgesucht werden müssen. Bei zwei beliebigen Geräten reichen offensichtlich die ohne hohen Ansprüche an die Fertigungstoleranz nicht aus. Das bei zwei eigentlich identischen Produkten. In Deinem Fall kannst Du Dich, was Die Farben anbelangt, nur nach dem besseren Display halten. Ob das der Mac ist, kann ich nicht beurteilen. Quote Link to comment Share on other sites More sharing options...
larsh Posted April 20, 2017 Author Share Posted April 20, 2017 The question is, if a tablet can be calibrated with a software. I found one: Colibri in playstore, it shows some differences with sRGB...2.1 but I don´t understand how to use it. Does someone here? Ja, da hast Du sicher recht, doch dass von einem Gerät aus der Druck nicht möglich ist, weil die Farben falsch kommen, ist ein wenig herbe, auch wenn ein Tablet sicher nicht extreme Möglichkeiten bieten muss. Nein, am Mac/ AP liegt es nicht, dessen Ergebnisse sind (einigermassen) ok. Gruss lars Quote all Aff 2.2: Capture One+ 23 pro; MacBook Pro, OSX 10.15.7, Fuji X-Pro2 Link to comment Share on other sites More sharing options...
SunRiseMoon Posted April 20, 2017 Share Posted April 20, 2017 Da ich selbst nichts drucke, kann ich nur mein Allgemeinwissen weitergeben, und das von Windows und PS. Dürfte allerdings allgemein gültig sein, da es der gängige Workflow ist. In das Bild muss das passende Druckprofil eingebettet werden. Das ist ja im Prinzip nichts anderes als eine Übersetzungstabelle, was bei einem gegebenen Farbpixel der Drucker mit dem verwendeten Papier daraus macht. Wenn also dieses Druckprofil eingebettet wird und der zweite Rechner nur zur Übermittlung der Bildinformationen an den Drucker genutzt wird, sollte die Farbdarstellung auf dessen Monitor egal sein. Anders ist es natürlich, wenn dafür eine Software verwendet wird, die solche Profile durch Voreinstellungen ändert. Wenn also der Druck über das Tablet andere Ergebnisse liefert, solltest Du das überprüfen. Außer, die Apfelwelt arbeitet ganz anders. Dann hilft mein Grundlagenwissen nicht weiter. Doch davon gehe ich nicht aus. :) ...doch dass von einem Gerät aus der Druck nicht möglich ist, weil die Farben falsch kommen, ist ein wenig herbe, auch wenn ein Tablet sicher nicht extreme Möglichkeiten bieten muss. Nein, am Mac/ AP liegt es nicht, dessen Ergebnisse sind (einigermassen) ok. Quote Link to comment Share on other sites More sharing options...
larsh Posted April 20, 2017 Author Share Posted April 20, 2017 Hi, that´s right with the ICC. First we had the problem, that it was thought in AF-files were sRGB...2.1 included. But AP says no and set it. But the view on the mac and the prints show cyan and not sky blue. Now in AF is this ICC included, the colors don´t change. We will see if there is a mistake or not. The white on the screens differ as I see it, but a meter sees it both tablet or mac and as 5.700 K. The line in mac makes the good prints. So the question is, can on the tablet the now used sky blue made to cyan so that I see another sky blue as sky blue and the mac line too. I can´t find a tool to modify the tablet screen. Best lars Quote all Aff 2.2: Capture One+ 23 pro; MacBook Pro, OSX 10.15.7, Fuji X-Pro2 Link to comment Share on other sites More sharing options...
SunRiseMoon Posted April 20, 2017 Share Posted April 20, 2017 Es ist so, dass jedes Kalibrierungsgerät versucht, das Beste aus der vorgegebenen Hard- und Software herauszuholen. Nur, ein €150,- Monitor kann nie dieselbe Qualität liefern wie ein €2000,- Gerät. Doch ich habe noch keine Kalibrierungsgeräte gefunden die am Ende gesagt haben "Wirf den Krempel weg, der ist für Bildbearbeitung nicht geeignet". Gut Software meldet am Ende nur die Zielwerte und stellt sie mit den erreichten gegenüber. Bei guten Monitoren ist die Kluft nicht besonders groß, bei den von mir geschilderten EIZO-Monitoren liegt der Unterschied der beiden Geräte irgendwo bei den letzten Stellen, also Weißpunkt nicht 5500 K sondern 5497K usw. Nur, wenn man 2 Monitore mit dem selben Bild nebeneinander stehen hat, erkennt man kleine Farbunterschiede, besonders bei monochromen Bilder. Nicht dramatisch, aber sichtbar. Dasselbe Bild auf einem Tablet, Smartphone oder gar Fernsehapparat nehme ich gar nicht ernst. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.