christovw66 Posted March 10, 2017 Share Posted March 10, 2017 No doubt again something simple, again probably a simple fix, but I've already conceded my infant level AD knowledge - help please. How do y'all explain the following behavior upon my reducing the image size in AD, on a 3 month old MacBook Pro running AD 1.5? I've attached 4 thumbnails below to help illustrate. I drag a me-made asset (that stupid black tote bag) onto a photographic image of Bigfoot in an attempt create a crude image of him carrying a black tote bag with a logo on it. Obviously, the scale of the tote is way too large so I begin to reduce it's size. I used both the Transform Panel (W+H) as well as constraining via Shift/Drag. In both cases, the smaller I reduce, the more I see proportional changes in certain layers in the logo (which are grouped). I did NOT have the 'Loch Children' box ticked - would this have bearing on the effect I'm getting? Most obvious IMO is the change in the curvature around the black 'C'...just saying. Thanks for any help! (I love playing with this program - can't wait 'til i have a better grasp of it all) -Christo Quote Link to comment Share on other sites More sharing options...
Staff Callum Posted March 10, 2017 Staff Share Posted March 10, 2017 Hi Christovw66, This issue certainly looks odd! Please could you provide a copy of the file in question so that I may look into this further for you? C Quote Please tag me using @ in your reply so I can be sure to respond ASAP. Link to comment Share on other sites More sharing options...
christovw66 Posted March 10, 2017 Author Share Posted March 10, 2017 Yes Callum - I will post the file but it may not be until later today. Thanks in advance for taking a look. -Christo Quote Link to comment Share on other sites More sharing options...
christovw66 Posted March 10, 2017 Author Share Posted March 10, 2017 Hi Christovw66, This issue certainly looks odd! Please could you provide a copy of the file in question so that I may look into this further for you? C ...here you go Callum... Thanks again, -Christo Quote Link to comment Share on other sites More sharing options...
christovw66 Posted March 10, 2017 Author Share Posted March 10, 2017 Callum... http://@christovw66toteasset1 Quote Link to comment Share on other sites More sharing options...
Staff Callum Posted March 10, 2017 Staff Share Posted March 10, 2017 Hi Christovw66, I can't see any file attached to your post if you go to More Reply options you should find an Attachments button towards the bottom of the page :) C Quote Please tag me using @ in your reply so I can be sure to respond ASAP. Link to comment Share on other sites More sharing options...
christovw66 Posted March 10, 2017 Author Share Posted March 10, 2017 Sorry about that Callum, Will get that file posted asap. Unfortunately it may not be until later this afternoon. Appreciate your help. Quote Link to comment Share on other sites More sharing options...
christovw66 Posted March 10, 2017 Author Share Posted March 10, 2017 Lemme know if you can see it now Callum... -Christo Quote Link to comment Share on other sites More sharing options...
Staff MEB Posted March 10, 2017 Staff Share Posted March 10, 2017 Hi christovw66, Yes, the file is visible now but Callum is requesting the original afdesign file (not a screenshot). Without it it's difficult to guess why this is going wrong. Quote A Guide to Learning Affinity Software Link to comment Share on other sites More sharing options...
christovw66 Posted March 10, 2017 Author Share Posted March 10, 2017 ...right on cue, my wifi is down preventing me from re-uploading that file Callum. Thanks in advance for your time (sending this on my phone). -Christo Quote Link to comment Share on other sites More sharing options...
christovw66 Posted March 10, 2017 Author Share Posted March 10, 2017 Got it MEB - my bad. I'll get it to you as soon as I get wifi back and can upload. Thanks! -Christo Quote Link to comment Share on other sites More sharing options...
christovw66 Posted March 10, 2017 Author Share Posted March 10, 2017 Callum and MEB, I believe this is the file that is 'changing' in proportion upon size reduction. (Disregard red circle) -Christo CVtoteSingleRasterized1.afdesign CVtoteRasterLayers1.afdesign Quote Link to comment Share on other sites More sharing options...
R C-R Posted March 11, 2017 Share Posted March 11, 2017 Christo, from what I can tell, the problem is the white curve that is the parent of the spindle hole. I believe you used the Corner tool to set its corner radii to 3 mm, so as you scale down the tote2 layer, the white curve maintains as best as it can those 3 mm corner radii, turning it progressively into a more circular shape. (In other words, the radii do not scale.) One way to fix this is to select it with the Corner tool & click "Bake Corners," which 'bakes' the shape into nodes that will scale proportionally. Perhaps easier, or at least to preserve edibility, would be to use a Rounded Rectangle for that shape. Quote All 3 1.10.8, & all 3 V2.4.1 Mac apps; 2020 iMac 27"; 3.8GHz i7, Radeon Pro 5700, 32GB RAM; macOS 10.15.7 Affinity Photo 1.10.8; Affinity Designer 1.108; & all 3 V2 apps for iPad; 6th Generation iPad 32 GB; Apple Pencil; iPadOS 15.7 Link to comment Share on other sites More sharing options...
christovw66 Posted March 11, 2017 Author Share Posted March 11, 2017 Very good R C-R, hope you know how much I appreciate your input. Extremely helpful. -Christo Callum 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.