CruizngSailor Posted January 21, 2017 Share Posted January 21, 2017 New user to Affinity. Following tutorial working on a .jpg image, selecting inpainting tool... no affect. What may I be missing? Quote Link to comment Share on other sites More sharing options...
Alfred Posted January 21, 2017 Share Posted January 21, 2017 Welcome to the Serif Affinity Forums, CruizngSailor. :) Go to the Layers panel and make sure that the selected layer is identified as a 'Pixel' layer, not an 'Image' layer. If it's the latter type (which can only be transformed globally) right-click it and choose the 'Rasterize...' option so that you can work on it at the pixel level. Quote Alfred Affinity Designer/Photo/Publisher 2 for Windows • Windows 10 Home/Pro Affinity Designer/Photo/Publisher 2 for iPad • iPadOS 17.4.1 (iPad 7th gen) Link to comment Share on other sites More sharing options...
manu schwendener Posted January 21, 2017 Share Posted January 21, 2017 Hello CruizngSailor Is selecting the inpainting tool (and trying to get it to work) your first step after opening the jpg? Quote manuschwendener.ch Link to comment Share on other sites More sharing options...
CruizngSailor Posted January 23, 2017 Author Share Posted January 23, 2017 Thank you Alfred & Manu... It appears that an important step ( not mentioned in the tutorial ) is that you have to select Current Layer and Below... very helpful, and frustrating not knowing that bit. I am a newcomer to AP. It appears that a number of the tutorials are showing a "best case" scenario regarding the use of the tools and they certainly do not work as well as in the videos when presented with an image containing Alternative Facts :rolleyes: ( sorry ). Additionally the presenter flies by with the speed of someone who is eminently familiar with the software / topic. Steps are skipped or given short shrift. Not like he is trying to teach someone who is unfamiliar. cjohnson66 and melanie7 2 Quote Link to comment Share on other sites More sharing options...
Alfred Posted January 23, 2017 Share Posted January 23, 2017 It appears that an important step ( not mentioned in the tutorial ) is that you have to select Current Layer and Below... very helpful, and frustrating not knowing that bit. You only need that step if you've added a pixel layer (instead of simply selecting the JPEG layer before choosing the Inpainting Brush Tool). Quote Alfred Affinity Designer/Photo/Publisher 2 for Windows • Windows 10 Home/Pro Affinity Designer/Photo/Publisher 2 for iPad • iPadOS 17.4.1 (iPad 7th gen) Link to comment Share on other sites More sharing options...
R C-R Posted January 24, 2017 Share Posted January 24, 2017 You only need that step if you've added a pixel layer (instead of simply selecting the JPEG layer before choosing the Inpainting Brush Tool). And it should be used only if the lower layers include something the inpainting algorithm can sample to replace whatever it is you are trying to eliminate from the current layer. If not, it will just increase processing time & may even introduce undesired artifacts. For general information about the process, I suggest reading the Help topic "Inpainting" in the built-in help system. You can search for it or access it as a subtopic in the "Retouching" section of the table of contents. Quote All 3 1.10.8, & all 3 V2.4.1 Mac apps; 2020 iMac 27"; 3.8GHz i7, Radeon Pro 5700, 32GB RAM; macOS 10.15.7 Affinity Photo 1.10.8; Affinity Designer 1.108; & all 3 V2 apps for iPad; 6th Generation iPad 32 GB; Apple Pencil; iPadOS 15.7 Link to comment Share on other sites More sharing options...
RWells Posted February 21, 2017 Share Posted February 21, 2017 I am also having problems with inpainting. I want to use a layer to do the inpainting. If I use the background layer it works. Is this normal? can you not use a special layer? Do I have to use the background or am I making the wrong kind of layer? 1. I add a pixel layer 2. I select the inplanting brush tool 3. I select the area I want to remove and it colors it red 4. I stop and nothing is removed. Thanks Roger Quote Link to comment Share on other sites More sharing options...
Alfred Posted February 21, 2017 Share Posted February 21, 2017 If you want to inpaint on a blank layer above the layer containing the actual image data, you need to choose 'Current Layer and Below' from the Context toolbar. Quote Alfred Affinity Designer/Photo/Publisher 2 for Windows • Windows 10 Home/Pro Affinity Designer/Photo/Publisher 2 for iPad • iPadOS 17.4.1 (iPad 7th gen) Link to comment Share on other sites More sharing options...
RWells Posted February 22, 2017 Share Posted February 22, 2017 Thanks that did the trick. I am just starting to learn how to use this software Roger Alfred 1 Quote Link to comment Share on other sites More sharing options...
mur_phy Posted February 23, 2017 Share Posted February 23, 2017 It would seem to me that if you need to choose "current layer & below" and the inpainting only is actually affecting the layer containing the actual image pixel data, then would not the method to be chosen to just do the inpainting on this layer and not have any blank layer above as the inpainting does not affect the blank layer anyway? If not, perhaps some other explanation can be made. Me too, RW, I am just trying to learn to use AP. Quote Link to comment Share on other sites More sharing options...
curtds Posted November 23, 2018 Share Posted November 23, 2018 I have a jpg and in the Layers panel it shows it's a pixel and the Inpainting Brush Tool won't do anything. I click on the Move Tool and click on the image and right click to scroll down to click on Rasterize and nothing changes. The Inpainting Brush Tool did work great, but now it won't. Am I missing something? Could I have accidentally clicked something that turned that off or what? Thanks. Quote Link to comment Share on other sites More sharing options...
manu schwendener Posted November 23, 2018 Share Posted November 23, 2018 Hello curtds When you have the pixel layer selected and try to use the inpainting tool, do you see the red marking where you want to inpaint? If yes, maybe the transparency is set too low (I always have it on 100% for inpainting). If the red marking doesn't appear: can you close the photo and open it again and use inpainting as the first step? If both aren't helping: would you post a screenshot of the Layers panel? cooperscuba 1 Quote manuschwendener.ch Link to comment Share on other sites More sharing options...
HVDB Photography Posted November 23, 2018 Share Posted November 23, 2018 On 2/23/2017 at 8:32 AM, mur_phy said: It would seem to me that if you need to choose "current layer & below" and the inpainting only is actually affecting the layer containing the actual image pixel data, then would not the method to be chosen to just do the inpainting on this layer and not have any blank layer above as the inpainting does not affect the blank layer anyway? If not, perhaps some other explanation can be made. Me too, RW, I am just trying to learn to use AP. The empty pixel layer on top is just a non-destructive way of working. If it fits into your workflow, you can use it. If not, ignore it. Quote Affinity Photo 2.3.1 Laptop MSI Prestige PS42 Windows 11 Home 23H2 (Build 22631.3007) - Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz 2.00 GHz - RAM 16,0 GB Link to comment Share on other sites More sharing options...
HVDB Photography Posted November 23, 2018 Share Posted November 23, 2018 3 hours ago, curtds said: I have a jpg and in the Layers panel it shows it's a pixel and the Inpainting Brush Tool won't do anything. I click on the Move Tool and click on the image and right click to scroll down to click on Rasterize and nothing changes. The Inpainting Brush Tool did work great, but now it won't. Am I missing something? Could I have accidentally clicked something that turned that off or what? Thanks. It would be handy to attach a screenshot with the layers panel & content toolbar visible. Quote Affinity Photo 2.3.1 Laptop MSI Prestige PS42 Windows 11 Home 23H2 (Build 22631.3007) - Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz 2.00 GHz - RAM 16,0 GB Link to comment Share on other sites More sharing options...
mur_phy Posted November 24, 2018 Share Posted November 24, 2018 check to see if there is a mask that you might have active instead of the background layer as the inpainting tool needs to work on the actual pixel layer. Also, check to see if the pixel layer you want to work on is actually selected as it is easy to get working and not notice you have not selected the layer you want. Have done both of the above and have seen tutorial creators do the same. Easy just to get busy and not notice what layer you actually have highlighted. Quote Link to comment Share on other sites More sharing options...
Paul Gray Posted March 7, 2019 Share Posted March 7, 2019 I was having trouble too and then noticed near the top under "Opacity" it was at 0. I made it 100 and that fixed the problem. Quote Link to comment Share on other sites More sharing options...
daws.gragg Posted April 1, 2019 Share Posted April 1, 2019 Still having trouble please help Quote Link to comment Share on other sites More sharing options...
IanSG Posted April 1, 2019 Share Posted April 1, 2019 Rather than list them all again, have you followed the suggestions already made in this thread i.e. correct layer, flow, opacity etc.? If so, has it ever worked or is this a new problem? It might help to know what OS and version number you're running. Quote AP, AD & APub user, running Win10 Link to comment Share on other sites More sharing options...
GFS Posted April 22, 2019 Share Posted April 22, 2019 On 4/1/2019 at 3:05 AM, daws.gragg said: Still having trouble please help There is a bug with inPainting on a pixel layer. I'm not sure what the problem is, but I'm *guessing* it may be to do with having elements of your file (layers) being outside the canvas area. Anyway ... this fixes it for me: •Group your layer •Copy the Group •From File Menu choose - 'New From Clipboard' •Use Transform to get your Group back to correct position and also resize canvas as necessary •UnGroup (This may fix some other weird stuff too) Quote Grumpy, but faithful (watch out all you cats) Link to comment Share on other sites More sharing options...
cooperscuba Posted August 11, 2019 Share Posted August 11, 2019 On 11/23/2018 at 5:27 PM, manu schwendener said: Hello curtds When you have the pixel layer selected and try to use the inpainting tool, do you see the red marking where you want to inpaint? If yes, maybe the transparency is set too low (I always have it on 100% for inpainting). If the red marking doesn't appear: can you close the photo and open it again and use inpainting as the first step? If both aren't helping: would you post a screenshot of the Layers panel? Transparency set too low for me - Thank you :) manu schwendener 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.