VanHeber Posted July 19, 2016 Share Posted July 19, 2016 Hi, When print directly from Affinity Designer some elements are missing or have bad resolution on paper. I printed on a BW laser print Samsung Xpress. Workaround is to save to PDF and then print from a reader. Link to comment Share on other sites More sharing options...
Mark Ingram Posted July 19, 2016 Share Posted July 19, 2016 Hi VanHeber, do you have an example document that we could take a look at? Link to comment Share on other sites More sharing options...
dannykaye Posted July 19, 2016 Share Posted July 19, 2016 I also have a print issue. I created a 3x7 grid of images on an A3 page and printed via a Canon Pixma IX6850. The print is wrongly sized and shifted so that what comes out is two vertical lines from the top about 2/3 of the way down and a 2x5 array of images that are the top left section of the set up page. The problem shows up in the printer preview. Image attached. Actually, image not attached, it gets to the end of the upload bar and fails. Danny Link to comment Share on other sites More sharing options...
Chris_K Posted July 19, 2016 Share Posted July 19, 2016 Hi dannykaye If you are having trouble uploading the files are you able to send a dropbox link or equivalent to them so we can take a look? Cheers Serif Europe Ltd - Check the latest news at www.affinity.serif.com Link to comment Share on other sites More sharing options...
VanHeber Posted July 19, 2016 Author Share Posted July 19, 2016 https://db.tt/tAuxwqp4 Sample file Link to comment Share on other sites More sharing options...
Chris_K Posted July 20, 2016 Share Posted July 20, 2016 Thanks VanHeber I've managed to recreate this so I shall get it logged Serif Europe Ltd - Check the latest news at www.affinity.serif.com Link to comment Share on other sites More sharing options...
Staff AdamW Posted July 20, 2016 Staff Share Posted July 20, 2016 Hi VanHeber, Thanks for taking the time to log this. The issue has been fixed for the next version (Build 8). If you still have problems after updating please let us know. VanHeber and Mark Ingram 2 Link to comment Share on other sites More sharing options...
Recommended Posts