Jump to content

Recommended Posts

FYI:  

 

In FAQs Serif told us: "We are going to focus on completing the full suite (including Affinity Publisher) on the Mac over the next 12 months. After that we will look into other platforms.“

 

And MEB: “There will be an Affinity Designer app for iPad/iPad Pro. It's currently under development but it may still take a little until it's ready.“ (14 December 2015) and "Affinity is also developing an iPad version of Affinity Designer, however it will only come after the Mac line have been developed/established“ (06 January 2015)

Share this post


Link to post
Share on other sites

And it is all just vaporware until any of them are released.

 

It's really easy to solve. Just use something else that has layout capabilities until such time as APub is released. Well, and until it has the capabilities one needs for their work...

Share this post


Link to post
Share on other sites

In the German language there is the word "Mäusekino" (cinema for mice). It describes a very small device with a very small display. Just for mice and not for humans ;)

As I understand it, Affinity is interested in targeting iPad Pro users, particularly pro users who pair it with the Apple pencil. That hardware combination seems to be getting a lot of attention from what I consider to be very "serious" graphic artists like I-Wei Huang, who explains why he uses it in this YouTube video.

 

It is not all about how large the display is. I think most pro users are well aware of that.


Affinity Photo 1.8.3, Affinity Designer 1.8.3, Affinity Publisher 1.8.3; macOS Mojave 10.14.6 iMac (27-inch, Late 2012); 2.9GHz i5 CPU; NVIDIA GeForce GTX 660M; 8GB RAM
Affinity Photo 
1.8.3.180 & Affinity Designer 1.8.3.2 for iPad; 6th Generation iPad 32 GB; Apple Pencil; iPadOS 13.3.1

Share this post


Link to post
Share on other sites

@R C-R

 

Then I hope that Serif has an extra team for it, so that the overall development is not delayed.


My Specs:
- Processor: AMD Phenom™ II X4 955 Processor 3.20 GHz- RAM: 8 GB
- Graphics card: NVIDIA GeForce GTS 250
- Monitor: SyncMaster F2380 (resolution 1920x1080)
- Operating system: Windows 10 Pro (1803) / 64 bit

Share this post


Link to post
Share on other sites

I have completely avoided Apple products for decades, but I think they have a hold on the mentality of people in publishing which goes beyond rationality and is now very entrenched.

My guess is that Affinity/Serif knows that an outsider needs to win friends and advocates to get seen/heard and, sadly, us Windows-using folk just aren't heard in those quarters. Look on the bright side "early isn't necessarily good". The Brits pretty much invented rail but everyone else learnt from our (expensive) mistakes.

Share this post


Link to post
Share on other sites

Thanks.  I had seen both of those answers before asking.  Let me rephrase – how will I get my existing InDesign documents/files into Affinity Publisher?

 

Try it again next year.

Share this post


Link to post
Share on other sites

Thanks.  I had seen both of those answers before asking.  Let me rephrase – how will I get my existing InDesign documents/files into Affinity Publisher?

 

By converting into PDF and importing to Designer or Publisher when it comes out.


Dell Inspiron 7559 i7    Windows 10 x64 Pro
Intel Core i7-6700HQ (3.50 GHz, 6M )    16GB Dual Channel DDR3L 1600MHz (8GBx2)    NVIDIA GeForce GTX 960M 4GB GDDR5
1TB HDD + 128 GB SSD Hard drive    UHD (3840 x 2160) Truelife LED - Backlit Touch Display

Share this post


Link to post
Share on other sites

Hello Sam,

 

Are you still using CS5.5? I downloaded a single PDF from your web site and that was the creator. If you are, keep using it for revising the former work done in ID (assuming your OS still runs it) and use APub for new work. As mentioned, for moving work from ID to APub, use a PDF. Unless Serif does include at least an IDML importer initially. But there will be reconstruction needed using a PDF, such as text frame linking, redoing, that sort of thing.

 

I generally only move former work on an as needed basis, creating new work in the application of my choice. I have had only X number of ID clients use any of the CC versions and for those I chose to just rent it for the duration of the job. Most all my ID clients are using CS6 and a few still use CS5.5--both of which I still have (and older). A couple of the IDCC clients have moved on to QXP, for which I gladly convert the work to for a nominal fee (which isn't much, I use a plug-in).

 

Mike

Share this post


Link to post
Share on other sites

By converting into PDF and importing to Designer or Publisher when it comes out.

 

Makes sense if you want to lose the easy editability.

Share this post


Link to post
Share on other sites

I have exported from InDesign as InDesign Markup (IDML) with extension .idml.  These files open directly in Scribus version 1.5.2.  What I am losing, however, is the ability to make fractions with OpenType fonts since Scribus appears NOT to do this.  This is something I need to do since I work with a lot of dimensions such as: 5/16", 15/32", 61/64", etc. Where I see that I AM able to do this is in Affinity Designer!  It works wonderfully – one page at a time…  I wonder if Affinity Publisher will be able to open these InDesign Markup (IDML) files directly (as the open source Scribus can do) since I assume Affinity Publisher will include Affinity Designer's ability to work with OpenType fonts to make fractions.


Sam Asher

Eugene, Oregon, USA

http://www.level-it.com

Share this post


Link to post
Share on other sites

Makes sense if you want to lose the easy editability.

 

By now, it is the only option.


Dell Inspiron 7559 i7    Windows 10 x64 Pro
Intel Core i7-6700HQ (3.50 GHz, 6M )    16GB Dual Channel DDR3L 1600MHz (8GBx2)    NVIDIA GeForce GTX 960M 4GB GDDR5
1TB HDD + 128 GB SSD Hard drive    UHD (3840 x 2160) Truelife LED - Backlit Touch Display

Share this post


Link to post
Share on other sites

I have exported from InDesign as InDesign Markup (IDML) with extension .idml.  These files open directly in Scribus version 1.5.2.  What I am losing, however, is the ability to make fractions with OpenType fonts since Scribus appears NOT to do this.  This is something I need to do since I work with a lot of dimensions such as: 5/16", 15/32", 61/64", etc. Where I see that I AM able to do this is in Affinity Designer!  It works wonderfully – one page at a time…  I wonder if Affinity Publisher will be able to open these InDesign Markup (IDML) files directly (as the open source Scribus can do) since I assume Affinity Publisher will include Affinity Designer's ability to work with OpenType fonts to make fractions.

 

I know it will, but don't believe it will be in the v. 1.0.


Dell Inspiron 7559 i7    Windows 10 x64 Pro
Intel Core i7-6700HQ (3.50 GHz, 6M )    16GB Dual Channel DDR3L 1600MHz (8GBx2)    NVIDIA GeForce GTX 960M 4GB GDDR5
1TB HDD + 128 GB SSD Hard drive    UHD (3840 x 2160) Truelife LED - Backlit Touch Display

Share this post


Link to post
Share on other sites

By now, it is the only option.

 

No, because there is no Affinity Publisher and it seems there will be no launch the next ten months.

 

The PDF method results in a large amount of work if the layout, the tables of contents and/or the footnotes have to be changed.

 

But perhaps there will be a converter app.

Share this post


Link to post
Share on other sites

"Importing" from Quark, InDesign... is only possible via PDF. Never mentioned there is not additional work to finished it. By now, there is a need of extremelly hard work, strong nerves, and it is almost impossible if you need to produce TOC, tables, footnotes...


Dell Inspiron 7559 i7    Windows 10 x64 Pro
Intel Core i7-6700HQ (3.50 GHz, 6M )    16GB Dual Channel DDR3L 1600MHz (8GBx2)    NVIDIA GeForce GTX 960M 4GB GDDR5
1TB HDD + 128 GB SSD Hard drive    UHD (3840 x 2160) Truelife LED - Backlit Touch Display

Share this post


Link to post
Share on other sites

As I understand it, Affinity is interested in targeting iPad Pro users, particularly pro users who pair it with the Apple pencil. That hardware combination seems to be getting a lot of attention from what I consider to be very "serious" graphic artists like I-Wei Huang, who explains why he uses it in this YouTube video.

 

It is not all about how large the display is. I think most pro users are well aware of that.

 

I was that convinced (and more) , too, after seeing a ton of user made videos (the promotional ones serves for close to nothing) . But... I tested the actual thing on a store for more than some initial minutes. I was there penciling and inking for 45 minutes or so. Not sold on it, now. Not as accurate as I thought, and the screen, 12.9 inches, for pro work, definitely is not the way. For some sketching? Yep, totally. But is not the price I'd be fine to pay for just an sketching device. You can do wonders with it, but I doubt is as comfortable in the long hours as a 23 -27 inches screen and a larger drawing tablet. (not my 65 cm wide one, lol, but an L or medium size, or even a Chinese tablet-monitor alternative of 22 inches would be much better. ) Still, Apple has this great capability to sell every product, and also, its devices tend to be very stable and solid. I don't deny that. But my real test case was quite revealing. To the point I even think that for serious work, despite being way less handy or portable (but still portable in a bag) , you are much better off with a 17" laptop and a wacom Intuos Medium.(or alternative brand, of the good ones) which still be below the cost of the iPad Pro + Pencil +keyboard (even in the lowest configuration of it). Not to speak if you already have a good laptop!. If one is really earning money with it, working more than 6 hours a day with it, drawing. For casual use, sketching, hobby, yep, IMO then is iPad Pro + Pencil all the way, in that niche is unbeatable. 

 

 


AD, AP and APub.  Ryzen 9 3900X, 32 GB RAM, GTX 1650 4GB, 500GB m.2 SSD, 1TB HDD 7200rpm. Wacom Intuos 4 XL.

Share this post


Link to post
Share on other sites

Hey, SrPx, as I understand it, the accuracy & responsiveness of the iPad Pro & Apple Pencil combo is determined by the capabilities & feature support of the app running on the iPad Pro. One of the more interesting features of the combo is the ability to distinguish between touch gestures & Pencil input, using separate sampling rates for each, even when both are used simultaneously.

 

So, assuming the app supports this, it would be possible to draw with the Pencil & zoom in seamlessly as needed for precision  work on small details & back out again for large scale work that fills the canvas. It could take some time to get used to this.


Affinity Photo 1.8.3, Affinity Designer 1.8.3, Affinity Publisher 1.8.3; macOS Mojave 10.14.6 iMac (27-inch, Late 2012); 2.9GHz i5 CPU; NVIDIA GeForce GTX 660M; 8GB RAM
Affinity Photo 
1.8.3.180 & Affinity Designer 1.8.3.2 for iPad; 6th Generation iPad 32 GB; Apple Pencil; iPadOS 13.3.1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

Please note the Annual Company Closure section in the Terms of Use. These are the Terms of Use you will be asked to agree to if you join the forum. | Privacy Policy | Guidelines | We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.