Signguy Posted March 8, 2016 Share Posted March 8, 2016 What is the best way to export an image without rasterizing text that has 3D effects and Shadowing? I need to send a graphic created in Affinity Designer to a printing company that prints on vinyl using a latex printer capable of printing 1200 dpi or higher. They need to be able to use some type of vector image and of course they prefer Ai but what can I use to prevent rasterizing? It appears that I can only export to a highest setting of 400 dpi. Quote Link to comment Share on other sites More sharing options...
Hokusai Posted March 8, 2016 Share Posted March 8, 2016 Signguy, It is unfortunate, but if you use the effects like 3D or Shadows, then your file is going to be rasterized (or at least part of it will be). The only way to avoid the rasterizing is to not use those kinds of effects. It seems odd to me that they require a vector file and yet they specify a dpi. Hokusai Quote Link to comment Share on other sites More sharing options...
Signguy Posted March 8, 2016 Author Share Posted March 8, 2016 Signguy, It is unfortunate, but if you use the effects like 3D or Shadows, then your file is going to be rasterized (or at least part of it will be). The only way to avoid the rasterizing is to not use those kinds of effects. It seems odd to me that they require a vector file and yet they specify a dpi. Hokusai They do require a vector and they don't specify a dpi. I am just trying to export an Affinity Designer vector image that uses 3D and shadow effects and AD doesn't export them as vectors so apparently the only option that I have is to export the objects as a rasterized images which then uses a dpi. They prefer the file in Adobe Illustrator format but since I can't do that, I'm trying to keep my images as vectors. Seems a little counter intuitive that I can give a vector shape a 3D or Shadow effect but there is no way to export the image as a vector shape to share with a print shop. Quote Link to comment Share on other sites More sharing options...
mac_heibu Posted March 8, 2016 Share Posted March 8, 2016 … and how do you think would it be possible to save a smooth(!) shadow as a vector element? Did you ever try to convert Chicken McNuggets into a soft drink? :) Quote Link to comment Share on other sites More sharing options...
Staff MEB Posted March 8, 2016 Staff Share Posted March 8, 2016 Hi Signguy, You can export at a higher setting than 400 dpi. Click on the input box and write the value you need. Signguy 1 Quote A Guide to Learning Affinity Software Link to comment Share on other sites More sharing options...
Signguy Posted March 9, 2016 Author Share Posted March 9, 2016 Hi Signguy, You can export at a higher setting than 400 dpi. Click on the input box and write the value you need. Thanks MEB, That is what I was looking for. I had an epiphany this afternoon as I was walking the Dog and taking in some fresh air and I figured that the input box was probably editable even though it has a drop-down list. Came back home and exported at 1200 dpi and sent it to the printers. They said it imported just fine. Quote Link to comment Share on other sites More sharing options...
Signguy Posted March 9, 2016 Author Share Posted March 9, 2016 … and how do you think would it be possible to save a smooth(!) shadow as a vector element? Did you ever try to convert Chicken McNuggets into a soft drink? :) MH, how does Affinity save a smooth shadow as a vector element? Apparently it's possible within Affinity when you do a "file/save" so I guess they have the formula for your Chicken McSoft Drink figured out. ;) I was just trying to figure out how to save it so that Ai can import it or how to save it at the highest dpi that a printer can print. It's nice that Affinity has the option to add effects to vector shapes but it's a little proprietary if it can't be used with other apps when it needs to be shared. Quote Link to comment Share on other sites More sharing options...
DavidMalcolm Posted March 9, 2016 Share Posted March 9, 2016 Are they PRINTING it onto the vinyl or cutting the vinyl in the shape of it? True vectors are just the shapes that you make, no gradients, no nothing just the shape (and the fill). Modern vector editors (like Illustrator and Photoshop) often add affects that can take that vector and apply effects that give them things like blurs, gradients, and all kinds of things like that, but those are all always being drawn on the fly by the program every time you load the file. If you want those effects to work in anything that isn't an Affinity app, you need to export it at whatever resolution you need it at. Because those effects are raster, they're just being redrawn every time you make a change. :) (Hope that made sense?) Quote Link to comment Share on other sites More sharing options...
Signguy Posted March 9, 2016 Author Share Posted March 9, 2016 Are they PRINTING it onto the vinyl or cutting the vinyl in the shape of it? True vectors are just the shapes that you make, no gradients, no nothing just the shape (and the fill). Modern vector editors (like Illustrator and Photoshop) often add affects that can take that vector and apply effects that give them things like blurs, gradients, and all kinds of things like that, but those are all always being drawn on the fly by the program every time you load the file. If you want those effects to work in anything that isn't an Affinity app, you need to export it at whatever resolution you need it at. Because those effects are raster, they're just being redrawn every time you make a change. :) (Hope that made sense?) Thanks David for the info. Yes, they are printing onto vinyl. So what you are saying is that all modern vector editors can share vector shapes (i.e. eps, svg, pdf) but the effects that you can add to them are not sharable between applications without first being rasterized, correct? (There is NO STANDARD to vector effects they are all proprietary) If you created a graphic on a 12" x 22" artboard and you want to send that graphic to a print shop to be printed on a 12 foot by 22 foot mural, you only have a few options. 1. Design the graphic in the same software as the print shop so that the image can be easily scaled without it being rasterized (This option would necessitate the need to purchase an Adobe CC subscription). Almost ALL print shops use Windows computers because their printers software is ONLY available on Windows. And since they use Windows, they use Adobe Illustrator and will probably never use a Mac or Affinity Designer unless a version is made for Windows. (And even if there was a Windows version, how many professional print shops would ditch the ever popular Adobe format?) 2. Scale the image to the desired output size and then save the image to their preferred file format (this option would rasterize all special effects). If your image is going to be scaled and rasterized, why would the print shop even need the file in a vector format? You may as well send them a png of the graphic. 3. Not use any effects at all when using Affinity Designer. (This is not likely to happen) The issue that I have is that when I send a file to the print shop to be printed, I now have to have first hand knowledge of each of the printers that they use. Some of the Eco-solvent printers on the market can print anywhere from 800 dpi up to 1440 dpi. The Latex printers can print up to 1200 dpi (maybe more). Without knowing the make and model of the printers, I would never know exactly what I should be setting my rasterization dpi setting to. Why wouldn't I want to utilize the maximum dpi that the printer supports? This is precisely why they want the graphic file in vector format in the first place. They can scale it and print it at the highest dpi that their current printers support. So, the next time my print shop wants me to send them a vector of my image, what dpi setting should I choose to get the best quality? (Yes, I need to know how to convert Chicken McNuggets into a soft drink) Even if I choose the industry standard of pdf which is supposed to be a file format used to "present and exchange documents reliably, independent of software, hardware or operation system", vector shapes can be saved and be scaled within a pdf file, but any effects that you give those shapes will always be rasterized and will not scale without being "pixelated". Long winded I know but this thread certainly leaves more questions than answers. Unsatisfied ex-customer 1 Quote Link to comment Share on other sites More sharing options...
Staff MEB Posted March 9, 2016 Staff Share Posted March 9, 2016 Hi Signguy, Yes, that's correct. You have to create it using only vector objects (no layers effects, complex gradients and some specific blend modes) so it can be exported as PDF and scaled as needed. Or, If you want to use the features mentioned above you have to set the dpi to which those objects/effects etc will be rasterised. This depends as you already said on the requirements of the print shop/printer. Quote A Guide to Learning Affinity Software Link to comment Share on other sites More sharing options...
TestTools Posted April 10, 2017 Share Posted April 10, 2017 Thanks for writing all that up Signguy. I learned a lot from your trail. There is a lot of nuance that doesn't become important, or obvious to a general user, until a problem exposes the drama. There's always something to learn. H.Creative 1 Quote Link to comment Share on other sites More sharing options...
neojogo Posted May 16, 2019 Share Posted May 16, 2019 We are in 2019 and I recommend Affinity to export PDF without raster, because transparency on vectors doesn't need to be raster. I need to create a really small sized PDF for working on Goodnotes App and the best size I can with Affinity Design is 140kb raster in 300 dpi for print, on Illustrator the same file without raster with transparency in perfect vector mode is sized 40kb (perfect for easy work on Goodnotes App). I suggest to consider remove de raster for PDFs at least for transparency, thanks. Quote Link to comment Share on other sites More sharing options...
szimm Posted June 5, 2019 Share Posted June 5, 2019 I have to agree with neojogo. It's time for AD to output pdfs without rasterizing. Ive been in Illustrator since 1989, and AD's output capabilities are the only thing holding be back from using it full time. I recently did a 4" logo, with gradients and transparencies, and enlarged it to 48" for a meter board. Illustrator had no problem, but AF rasterized the darn thing. If I wanted it rasterized I would have built it in AP or Photoshop. There is no doubt Designer is great for web, but for print design – serious print design – it's a no-go – until they correct the output issue. Sorry. H.Creative and neojogo 2 Quote Link to comment Share on other sites More sharing options...
Brian D Posted June 5, 2019 Share Posted June 5, 2019 @szimm Are you exporting as PDF/X-4? Quote Link to comment Share on other sites More sharing options...
Lee W Posted January 11, 2020 Share Posted January 11, 2020 It may not work for everyone but I can tell you what I do to solve this problem for myself. When I create titles for my book covers like to use outlines around the text and that will always cause the text to be rastered when I export it as a PDF. Before I export it I create a duplicate of the title and make sure that it is the top layer. Then I delete the outline from the duplicate top layer. On export the outline is good quality and the text on top is not rastered. When I export to PDF this way the text remains sharp and clear no matter how much I zoom in on it. I am not 100% sure but it seams to me that using any kind of adjustment layer or overlay on text has a negative affect on the quality of entire PDF so I try to avoid adjustment layers and overlays on text. I hope this helps. Quote Link to comment Share on other sites More sharing options...
KenBot Posted October 21, 2020 Share Posted October 21, 2020 According to w3c, svg does support fill opacity, gradients, and patterns. I was even surprised to find SMIL animations still supported. Unless, for some reason, AD is using SVGTiny I see no reason for shadows and effects to be rastorized (not an adobe proprietary format). This is an odd "feature" of export persona... Quote Link to comment Share on other sites More sharing options...
Paul Coddington Posted November 8, 2021 Share Posted November 8, 2021 This just caught me out as well. Was attempting to contribute to a public SVG resource, but my drop shadow got rasterised. So, I recreated the same outcome using gaussian blur on a copy of the shape instead, but that got rasterised too. Yet, when I look up SVG standards, there appears to be support for both drop shadows and gaussian blur effects. And Affinity does not rasterise gradient fills or semi-transparent objects, so this seems a bit inconsistent. It seems to be a common enough problem though: when I work with SVG files pulled from the same public resource site, I often have to convert rasterised glows and shadows to drop shadows and gaussian blurs when importing them to Affinity. Hopefully this is on the ToDo list at some point. NotMyFault 1 Quote Link to comment Share on other sites More sharing options...
David in Яuislip Posted November 8, 2021 Share Posted November 8, 2021 16 minutes ago, Paul Coddington said: This just caught me out as well. Me too. Only way I could produce a vector blurred shadow (feGaussianBlur) was to replicate the shape, colour it black, offset a few pixels and apply a Gaussian blur from fx. Then export to svg with Rasterise set to Nothing. If it's left on Unsupported Properties then the svg has an embedded png. The rasterised blur is slightly larger but the vector blur is acceptable Quote Microsoft Windows 11 Home, Intel i7-1360P 2.20 GHz, 32 GB RAM, 1TB SSD, Intel Iris Xe Affinity Photo - 24/05/20, Affinity Publisher - 06/12/20, KTM Superduke - 27/09/10 Link to comment Share on other sites More sharing options...
Alfred Posted November 8, 2021 Share Posted November 8, 2021 15 minutes ago, Paul Coddington said: And Affinity does not rasterise gradient fills or semi-transparent objects, so this seems a bit inconsistent. Any effects applied via the Effects panel will consistently be rasterized on export. Gradients fills and transparency are not ‘effects’ for the purposes of this discussion. GarryP 1 Quote Alfred Affinity Designer/Photo/Publisher 2 for Windows • Windows 10 Home/Pro Affinity Designer/Photo/Publisher 2 for iPad • iPadOS 17.4.1 (iPad 7th gen) Link to comment Share on other sites More sharing options...
H.Creative Posted December 15, 2021 Share Posted December 15, 2021 On 6/6/2019 at 4:51 AM, szimm said: I have to agree with neojogo. It's time for AD to output pdfs without rasterizing. Ive been in Illustrator since 1989, and AD's output capabilities are the only thing holding be back from using it full time. I recently did a 4" logo, with gradients and transparencies, and enlarged it to 48" for a meter board. Illustrator had no problem, but AF rasterized the darn thing. If I wanted it rasterized I would have built it in AP or Photoshop. There is no doubt Designer is great for web, but for print design – serious print design – it's a no-go – until they correct the output issue. Sorry. Totally agree, I'm working with clothing sublimation designers and having issues with vector becoming rasterised when exporting to PDF (their templates are in PDF and this seems to be the only format that maintains layer integrity for when they open it in Ai). Seriously contemplating getting Ai just so that I don't have to go through the export process. Quote Link to comment Share on other sites More sharing options...
visualsbysina Posted January 12, 2023 Share Posted January 12, 2023 So can affinity designer export SVG effects with native SVG element support such as feDropShadow or NOT? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.