pixfan Posted January 31, 2016 Share Posted January 31, 2016 Hello, Since a bigger number of images have to be processed, I am thankful for any hint to accelerate the workflow and to avoid or save actions. 1) When I export an image, i) I open the dialog for jpg export, (ii) set the compression ratio to 90% (always reset to 100% for new images :unsure: , why?), save the image, (iii) close the image, and have to negate to save the affinity file. Is there a way to accelerate the process to get just the jpg-file. 2) Making adjustments, I almost alway use Exposure, HSL, WB and Shadows. Way do I have to open the dialogs for every single image? Is there a way to keep these dialog windows open by default even when the active image is changed? Maybe, there is another different way to accelerate recurring processes at a series of images? BTW, I am not talking about stack processing, i am talking about reducing hand moves and clicks. Thank yo for your help. Regards pixfan Quote Link to comment Share on other sites More sharing options...
barninga Posted January 31, 2016 Share Posted January 31, 2016 if you load a jpg file, edit it (non destructively) and click on file=>save, a dialog box will offer to save it flattened (that is not in ap's native format). however, you don't have the chance to modify the quality setting. about accelerating the process, if you select the adjustments layers, copy them and paste to another pic, you assign that pic exactly the same adjustments you made to the first one. however, if you happened to paint on the adjustment layers to mask them, the trick will work only if the second image needs the same adjustment masking. i guess this could be solved by not painting directly in the adjustment layers, but explicitly assigning them a mask and painting in it: the mask can be deleted or modified as necessary in the second image. you could also try with LUTs. basically, ap can compare two versions of the same image, the original and the one exported after applying adjustments, and apply the difference between the twos to a third image. i had to read the help, watch the tutorial a couple of times and experiment a bit, but at last i could make that work. afaik, ap does not implements batch processing (yet). here's the tutorial about luts: Quote take care, stefano Link to comment Share on other sites More sharing options...
crabtrem Posted February 1, 2016 Share Posted February 1, 2016 I believe, if I understand your problem correctly. You might want to consider making your own custom preset in the Export Persona. At least for the export portion. Maybe you can make a master file like you want. Make all the adjustments. Now keep that file up. Copy that file. Open a new file, and Edit-Paste Style on to the new file. All of the adjustments you made should be now on your new file, and you can change them accordingly. Quote Link to comment Share on other sites More sharing options...
pixfan Posted February 1, 2016 Author Share Posted February 1, 2016 Thanks for your reply. I will have a look at LUTs, thank you very much . The best way would be a configurable develop persona, where I am able to select/specify those adjustment parameters, which are always open. To the jpg-export topic: Lets say 8 images are open and i have adjusted them concerning exposure, WB and tones. Best case: A button press to export them all as jpg-files (at defined compression). Second best case: One button press for each singel image to get the jpg-files. Is there an existing way which is most close to this? Is there a way to export "all images" at once? Best regards pixfan Quote Link to comment Share on other sites More sharing options...
crabtrem Posted February 1, 2016 Share Posted February 1, 2016 You may want to consider setting up your studio to display the panels you want quick access to. Additionally, I would think you might want to configure keyboard shortcuts to the tools you use the most in preferences. Quote Link to comment Share on other sites More sharing options...
pixfan Posted February 1, 2016 Author Share Posted February 1, 2016 1) Good idea, but the dialogs don´t stay open for the next images. Perhaps, a set of LUTs which cover mostly used adjustments my be a solution. The idea is to pack some adjustments in a LUT, copy and paste the LUT to the next image and start adjustments from that point? Its similar to copy/paste filter adjustments but saved LUTs are available also when AF is started the next time. 2) Isn´t there a possibility to export all open images at one bunch? Quote Link to comment Share on other sites More sharing options...
barninga Posted February 1, 2016 Share Posted February 1, 2016 you can also save only the adjustment layers as a afphoto, and open it when you need to copy and paste them. it's less portable than luts, but it has the advantage that adjustment can be fine tuned if needed. pixfan 1 Quote take care, stefano Link to comment Share on other sites More sharing options...
pixfan Posted February 1, 2016 Author Share Posted February 1, 2016 << you can also save only the adjustment layers as a afphoto Ah, Ok! Maybe a shortcut can be defined that exports an image by just using it. It has to include the export settings (File format e.g. jpg and compression ration). Quote Link to comment Share on other sites More sharing options...
crabtrem Posted February 2, 2016 Share Posted February 2, 2016 If you want to go with a file as a template. I would recommend making a new file with your image set using the 'place' image command from the file menu. Now complete everything you need from start to finish and save the file as a master. Open it up, and select the image, and with 'place' at the top context bar you have the option to change or replace the image with a new one. Quote Link to comment Share on other sites More sharing options...
pixfan Posted February 2, 2016 Author Share Posted February 2, 2016 Sorry, I can not follow. :) "Place" places an image upon another. :huh: What is the exact step by step procedure, you suggest? As yet, I go this way: I make the main adjustments using one image and copy the adjustment layers from the layer tap to the other images I want to tread similarly. For the jpg export subject: I was looking for a faster way but I didn't finde one. Pressing shift alt cmd and S to open the export dialog for every image seems to be the shortest way so far. A short cut such as "Export all open images" would be that helpful. Quote Link to comment Share on other sites More sharing options...
crabtrem Posted February 2, 2016 Share Posted February 2, 2016 So instead of opening up a picture, you create a new document. Then go to the file menu, select place. Your file is fit into an image container that you can control. Your image resizes to object container and you can do all your adjustments as normal. Save it to a filename. Export it. Want to change the picture, just select your image object, in the context menu you can replace image. You picture will change, but everything you have done will still be there. Quote Link to comment Share on other sites More sharing options...
crabtrem Posted February 2, 2016 Share Posted February 2, 2016 So instead of opening up a picture, you create a new document. Then go to the file menu, select place. Your file is fit into an image container that you can control. Your image resizes to object container and you can do all your adjustments as normal. Save it to a filename. Export it. Want to change the picture, just select your image object, in the context menu you can replace image. You picture will change, but everything you have done will still be there. Quote Link to comment Share on other sites More sharing options...
crabtrem Posted February 2, 2016 Share Posted February 2, 2016 So if you have a system that can handle it. You could in theory place every image you have on a layer in one file. Set them up as slices in export, and update as many as your memory and system will allow in one file. This video might be of interest to you too. Quote Link to comment Share on other sites More sharing options...
pixfan Posted February 2, 2016 Author Share Posted February 2, 2016 That´s a good idea and it definitely improves my current approach. Thank you for the hint. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.