Jump to content
You must now use your email address to sign in [click for more info] ×

Weißen Hintergrund entfernen


Recommended Posts

Hallo, ich möchte mit der Funktion "weißen Hintergrund entfernen" ein PNG erzeugen. Es soll eine Unterschrift produziert werden die man auf ein Formular das gescannt wurde setzen kann. Es soll also die drunterliegende Struktur zu sehen sein. Der Weg über Affinity Photo mit Pfad geht zwar, ist aber umständlich.

Vielen Dank für Tips, Gottfried

Link to comment
Share on other sites

  • Staff

Hallo @gotti,

Es wäre am einfachsten, Ratschläge zu geben, indem Sie ein Beispiel des gescannten Bildes verwenden, auf das Sie sich beziehen. Können Sie das hier anbieten?

Ich bitte um Entschuldigung, da dies möglicherweise ein Übersetzungsfehler ist, aber nur zur Bestätigung: Haben Sie versucht, „Weißen Hintergrund entfernen“ zu verwenden, und sind mit den Ergebnissen nicht zufrieden, also suchen Sie nach Alternativen oder suchen anderweitig nach Rat mit Ihrem Arbeitsablauf?

Vielen Dank im Voraus!

Please Note: I am now out of the office until Tuesday 2nd April on annual leave.

If you require urgent assistance, please create a new thread and a member of our team will be sure to assist asap.

Many thanks :)

Link to comment
Share on other sites

35 minutes ago, gotti said:

Hallo, ich möchte mit der Funktion "weißen Hintergrund entfernen" ein PNG erzeugen. Es soll eine Unterschrift produziert werden die man auf ein Formular das gescannt wurde setzen kann.

Sollte easy sein, erzeuge halt in APh oder ADe ein neues Dokument mit transparentem Hintergrund ...

Quote

Für Farben (Farbmanagement):

  • Farbformat: Hier legen Sie für den Farbmodus eine der folgenden Optionen fest: RGB (8, 16 oder 32-Bit HDR) oder Grau (8 oder 16 Bit), CMYK (8 Bit) oder Lab (16 Bit).
  • Farbprofil: Hier legen Sie den Farbraum (Gamut) für das zuvor ausgewählte Farbformat fest.
  • Transparenter Hintergrund: Um den Hintergrund Ihrer Seite transparent zu schalten, aktivieren Sie diese Option.
  • ... in APh nimmst Du dann einen Pinsel der schön gleichmässig dünnes Striche zieht und setzt bzw. schreibst halt damit Deine Unterschrift (ein mit einem Wacom Tablet-Stift etc. geht es halt am Besten), dann exportierst Du das Ganze (nur die ausgewählte Unterschrift) als PNG.
  • ... in ADe (hier dann Vektor mässig) nimmst Du halt den Bleistift und unterschreibst damit auf dem transparenten Dokument, auch hier geht das wiederum mit einem Wacom Tablet-Stift am Besten, dann selektierst Du den Layer der getätigten Unterschrift und exportierst (nur die Auswahl) wiederum als PNG.
  • Falls Du stattdessen eine Unterschrift eingescannst hast (also als JPG/PNG), dann würde ich diese erst einmal mit einem externen Vektorisierer (Bitmap-zu-Vektor) Werkzeug vektorisieren. Siehe hierfür (zum Autotracen) z.B. ...

    - VTracer Online
    - Potrace Online

    ... und dann in APh oder ADe feintunen und von dort dann als SVG oder PNG exportieren.

 

 

☛ Affinity Designer 1.10.8 ◆ Affinity Photo 1.10.8 ◆ Affinity Publisher 1.10.8 ◆ OSX El Capitan
☛ Affinity V2.3 apps ◆ MacOS Sonoma 14.2 ◆ iPad OS 17.2

Link to comment
Share on other sites

Hallo Dan C,

ich wollte die Funktion "weißen Hintergrund entfernen" anwenden. Ich bekomme aber den weißen Hintergrund nicht weg. Welches Bildformat muß ich einstellen, daß das funktioniert.

Dass es mit Pfad erstellen und dann als Vektor geht weiß ich. Ich arbeite auch mit Photoshop/Indesign und da klappt es. Wahrscheinlich mache ich nur einen kleinen Fehler.

S.jpg

Link to comment
Share on other sites

Hallo Gotti,

Wenn Du den Scan in Photo geöffnet hast: 

  1. Die Ebene mittels Rastern in eine Pixel-Ebene umwandeln https://affinity.help/photo/de.lproj/pages/LayerOperations/rasterizing.html
  2. Danach den Filter anwenden https://affinity.help/photo/de.lproj/pages/Filters/filter_eraseWhitePaper.html
  3. Damit du siehst das er geklappt hat, füge eine Füllebene mit kräftiger Farbe wie blau hinzu, und verschiebe sie im Ebenenstapel nach unten

PS: im deutschen UI sind 2 filter mit dem gleichen Namen übersetzt worden. Das ist natürlich ein Fehler. Prüfe, das Du den richtigen Filter erwischt 😉 (Erase White Paper, und nicht remove white matte)

 

05D7382A-4696-4861-8768-AAB68E941860.jpeg

4CF3DBB7-B86A-491A-B8A1-7E1C6B7AB29E.jpeg

Mac mini M1 A2348 | Windows 10 - AMD Ryzen 9 5900x - 32 GB RAM - Nvidia GTX 1080

LG34WK950U-W, calibrated to DCI-P3 with LG Calibration Studio / Spider 5

iPad Air Gen 5 (2022) A2589

Special interest into procedural texture filter, edit alpha channel, RGB/16 and RGB/32 color formats, stacking, finding root causes for misbehaving files, finding creative solutions for unsolvable tasks, finding bugs in Apps.

 

Link to comment
Share on other sites

  • Staff
1 hour ago, NotMyFault said:

Wenn Du den Scan in Photo geöffnet hast: 

  1. Die Ebene mittels Rastern in eine Pixel-Ebene umwandeln https://affinity.help/photo/de.lproj/pages/LayerOperations/rasterizing.html
  2. Danach den Filter anwenden https://affinity.help/photo/de.lproj/pages/Filters/filter_eraseWhitePaper.html
  3. Damit du siehst das er geklappt hat, füge eine Füllebene mit kräftiger Farbe wie blau hinzu, und verschiebe sie im Ebenenstapel nach unten

Nachfolgend finden Sie eine Bildschirmaufzeichnung dieser Schritte -

Ist es das, was Sie erreichen möchten? :)

Please Note: I am now out of the office until Tuesday 2nd April on annual leave.

If you require urgent assistance, please create a new thread and a member of our team will be sure to assist asap.

Many thanks :)

Link to comment
Share on other sites

I just googled for this filter and landed here – thanks for the explanation. 😊

This filter removes all white pixels in the image, not just the background. In order not to destroy the inside of the image, I select the needed pixels with the quick selection tool, copy them and paste them after applying the filter.

Is there a faster way to do this?

Link to comment
Share on other sites

@Failix

33 minutes ago, Failix said:

Is there a faster way to do this?

Depends on the image

Can you upload a sample of the sort of image you were working on?

To save time I am currently using an automated AI to reply to some posts on this forum. If any of "my" posts are wrong or appear to be total b*ll*cks they are the ones generated by the AI. If correct they were probably mine. I apologise for any mistakes made by my AI - I'm sure it will improve with time.

Link to comment
Share on other sites

Here is a very simple example. The white in the mouse could also be the eyeballs of a human or the label on a computer component. You have to protect it somehow before applying the filter.

example-white.jpg

Additional question: in Photoshop I have these blend sliders that allow me to control exactly how much white is removed. I can't find anything comparable in Afffinity Photo, but I imagine I saw a video about it a long time ago. Unfortunately I can't find it anymore, or am I wrong and this option doesn't exist in AFP?

 

photoshop.png

Edited by Failix
Link to comment
Share on other sites

Untitled.jpg.90cd74a8ea347bc8398e7b86b7d72892.jpg

Acer XC-895 : Core i5-10400 Hexa-core 2.90 GHz :  32GB RAM : Intel UHD Graphics 630 : Windows 10 Home
Affinity Publisher 2 : Affinity Photo 2 : Affinity Designer 2 : (latest release versions) on desktop and iPad

Link to comment
Share on other sites

That particular filter is better suited to things like line art where the subject contains no "white" parts in it

In this case I would probably use another technique E.g. The Selection Brush Tool.

The only real tricky part is the shadow which I would just use a layer FX to add later. PS You can erase parts of the shadow where you do not want it to show, like on the mouse cable

 

 

shadow.png

To save time I am currently using an automated AI to reply to some posts on this forum. If any of "my" posts are wrong or appear to be total b*ll*cks they are the ones generated by the AI. If correct they were probably mine. I apologise for any mistakes made by my AI - I'm sure it will improve with time.

Link to comment
Share on other sites

When I want to crop challenging images, I work with brushes and masks. But sometimes I need a quick crop for screen presentations or tutorials, and removing the white background is very helpful.

Then I'll probably continue to work with a copy of the white parts of the image to be preserved, and of course I create these with the selection brush and sometimes with the magic wand, depending on the situation.

 

Postscript: Just realized that it's enough to put a selection around the area to be protected and then invert the selection before using the "remove white parts of the image" filter. So it is very usable after all ...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use | Privacy Policy | Guidelines | We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.