gotti Posted June 30, 2022 Share Posted June 30, 2022 Hallo, ich möchte mit der Funktion "weißen Hintergrund entfernen" ein PNG erzeugen. Es soll eine Unterschrift produziert werden die man auf ein Formular das gescannt wurde setzen kann. Es soll also die drunterliegende Struktur zu sehen sein. Der Weg über Affinity Photo mit Pfad geht zwar, ist aber umständlich. Vielen Dank für Tips, Gottfried Quote Link to comment Share on other sites More sharing options...
Staff Dan C Posted June 30, 2022 Staff Share Posted June 30, 2022 Hallo @gotti, Es wäre am einfachsten, Ratschläge zu geben, indem Sie ein Beispiel des gescannten Bildes verwenden, auf das Sie sich beziehen. Können Sie das hier anbieten? Ich bitte um Entschuldigung, da dies möglicherweise ein Übersetzungsfehler ist, aber nur zur Bestätigung: Haben Sie versucht, „Weißen Hintergrund entfernen“ zu verwenden, und sind mit den Ergebnissen nicht zufrieden, also suchen Sie nach Alternativen oder suchen anderweitig nach Rat mit Ihrem Arbeitsablauf? Vielen Dank im Voraus! Quote Please note - I am currently out of the office for a short while whilst recovering from surgery (nothing serious!), therefore will not be available on the Forums during this time. Should you require a response from the team in a thread I have previously replied in - please Create a New Thread and our team will be sure to reply as soon as possible. Many thanks! Link to comment Share on other sites More sharing options...
v_kyr Posted June 30, 2022 Share Posted June 30, 2022 35 minutes ago, gotti said: Hallo, ich möchte mit der Funktion "weißen Hintergrund entfernen" ein PNG erzeugen. Es soll eine Unterschrift produziert werden die man auf ein Formular das gescannt wurde setzen kann. Sollte easy sein, erzeuge halt in APh oder ADe ein neues Dokument mit transparentem Hintergrund ... Quote Für Farben (Farbmanagement): Farbformat: Hier legen Sie für den Farbmodus eine der folgenden Optionen fest: RGB (8, 16 oder 32-Bit HDR) oder Grau (8 oder 16 Bit), CMYK (8 Bit) oder Lab (16 Bit). Farbprofil: Hier legen Sie den Farbraum (Gamut) für das zuvor ausgewählte Farbformat fest. Transparenter Hintergrund: Um den Hintergrund Ihrer Seite transparent zu schalten, aktivieren Sie diese Option. ... in APh nimmst Du dann einen Pinsel der schön gleichmässig dünnes Striche zieht und setzt bzw. schreibst halt damit Deine Unterschrift (ein mit einem Wacom Tablet-Stift etc. geht es halt am Besten), dann exportierst Du das Ganze (nur die ausgewählte Unterschrift) als PNG. ... in ADe (hier dann Vektor mässig) nimmst Du halt den Bleistift und unterschreibst damit auf dem transparenten Dokument, auch hier geht das wiederum mit einem Wacom Tablet-Stift am Besten, dann selektierst Du den Layer der getätigten Unterschrift und exportierst (nur die Auswahl) wiederum als PNG. Falls Du stattdessen eine Unterschrift eingescannst hast (also als JPG/PNG), dann würde ich diese erst einmal mit einem externen Vektorisierer (Bitmap-zu-Vektor) Werkzeug vektorisieren. Siehe hierfür (zum Autotracen) z.B. ... - VTracer Online - Potrace Online ... und dann in APh oder ADe feintunen und von dort dann als SVG oder PNG exportieren. Quote ☛ Affinity Designer 1.10.8 ◆ Affinity Photo 1.10.8 ◆ Affinity Publisher 1.10.8 ◆ OSX El Capitan ☛ Affinity V2.3 apps ◆ MacOS Sonoma 14.2 ◆ iPad OS 17.2 Link to comment Share on other sites More sharing options...
gotti Posted July 1, 2022 Author Share Posted July 1, 2022 Hallo Dan C, ich wollte die Funktion "weißen Hintergrund entfernen" anwenden. Ich bekomme aber den weißen Hintergrund nicht weg. Welches Bildformat muß ich einstellen, daß das funktioniert. Dass es mit Pfad erstellen und dann als Vektor geht weiß ich. Ich arbeite auch mit Photoshop/Indesign und da klappt es. Wahrscheinlich mache ich nur einen kleinen Fehler. Quote Link to comment Share on other sites More sharing options...
NotMyFault Posted July 1, 2022 Share Posted July 1, 2022 Hallo Gotti, Wenn Du den Scan in Photo geöffnet hast: Die Ebene mittels Rastern in eine Pixel-Ebene umwandeln https://affinity.help/photo/de.lproj/pages/LayerOperations/rasterizing.html Danach den Filter anwenden https://affinity.help/photo/de.lproj/pages/Filters/filter_eraseWhitePaper.html Damit du siehst das er geklappt hat, füge eine Füllebene mit kräftiger Farbe wie blau hinzu, und verschiebe sie im Ebenenstapel nach unten PS: im deutschen UI sind 2 filter mit dem gleichen Namen übersetzt worden. Das ist natürlich ein Fehler. Prüfe, das Du den richtigen Filter erwischt 😉 (Erase White Paper, und nicht remove white matte) Quote Mac mini M1 A2348 | Windows 10 - AMD Ryzen 9 5900x - 32 GB RAM - Nvidia GTX 1080 LG34WK950U-W, calibrated to DCI-P3 with LG Calibration Studio / Spider 5 iPad Air Gen 5 (2022) A2589 Special interest into procedural texture filter, edit alpha channel, RGB/16 and RGB/32 color formats, stacking, finding root causes for misbehaving files, finding creative solutions for unsolvable tasks, finding bugs in Apps. Link to comment Share on other sites More sharing options...
Staff Dan C Posted July 1, 2022 Staff Share Posted July 1, 2022 1 hour ago, NotMyFault said: Wenn Du den Scan in Photo geöffnet hast: Die Ebene mittels Rastern in eine Pixel-Ebene umwandeln https://affinity.help/photo/de.lproj/pages/LayerOperations/rasterizing.html Danach den Filter anwenden https://affinity.help/photo/de.lproj/pages/Filters/filter_eraseWhitePaper.html Damit du siehst das er geklappt hat, füge eine Füllebene mit kräftiger Farbe wie blau hinzu, und verschiebe sie im Ebenenstapel nach unten Nachfolgend finden Sie eine Bildschirmaufzeichnung dieser Schritte - 2022-07-01 13-20-57.mp4 Ist es das, was Sie erreichen möchten? Quote Please note - I am currently out of the office for a short while whilst recovering from surgery (nothing serious!), therefore will not be available on the Forums during this time. Should you require a response from the team in a thread I have previously replied in - please Create a New Thread and our team will be sure to reply as soon as possible. Many thanks! Link to comment Share on other sites More sharing options...
Failix Posted July 3, 2022 Share Posted July 3, 2022 I just googled for this filter and landed here – thanks for the explanation. 😊 This filter removes all white pixels in the image, not just the background. In order not to destroy the inside of the image, I select the needed pixels with the quick selection tool, copy them and paste them after applying the filter. Is there a faster way to do this? Quote Link to comment Share on other sites More sharing options...
carl123 Posted July 3, 2022 Share Posted July 3, 2022 @Failix 33 minutes ago, Failix said: Is there a faster way to do this? Depends on the image Can you upload a sample of the sort of image you were working on? Quote To save time I am currently using an automated AI to reply to some posts on this forum. If any of "my" posts are wrong or appear to be total b*ll*cks they are the ones generated by the AI. If correct they were probably mine. I apologise for any mistakes made by my AI - I'm sure it will improve with time. Link to comment Share on other sites More sharing options...
Failix Posted July 3, 2022 Share Posted July 3, 2022 (edited) Here is a very simple example. The white in the mouse could also be the eyeballs of a human or the label on a computer component. You have to protect it somehow before applying the filter. Additional question: in Photoshop I have these blend sliders that allow me to control exactly how much white is removed. I can't find anything comparable in Afffinity Photo, but I imagine I saw a video about it a long time ago. Unfortunately I can't find it anymore, or am I wrong and this option doesn't exist in AFP? Edited July 3, 2022 by Failix Quote Link to comment Share on other sites More sharing options...
PaulEC Posted July 3, 2022 Share Posted July 3, 2022 Quote Acer XC-895 : Core i5-10400 Hexa-core 2.90 GHz : 32GB RAM : Intel UHD Graphics 630 : Windows 10 Home Affinity Publisher 2 : Affinity Photo 2 : Affinity Designer 2 : (latest release versions) on desktop and iPad Link to comment Share on other sites More sharing options...
Failix Posted July 3, 2022 Share Posted July 3, 2022 Thank you very much! This is close to what I was looking for. However, it works differently in Photoshop and more usable in my opinion, see screenshots. Quote Link to comment Share on other sites More sharing options...
carl123 Posted July 3, 2022 Share Posted July 3, 2022 That particular filter is better suited to things like line art where the subject contains no "white" parts in it In this case I would probably use another technique E.g. The Selection Brush Tool. The only real tricky part is the shadow which I would just use a layer FX to add later. PS You can erase parts of the shadow where you do not want it to show, like on the mouse cable Quote To save time I am currently using an automated AI to reply to some posts on this forum. If any of "my" posts are wrong or appear to be total b*ll*cks they are the ones generated by the AI. If correct they were probably mine. I apologise for any mistakes made by my AI - I'm sure it will improve with time. Link to comment Share on other sites More sharing options...
Failix Posted July 3, 2022 Share Posted July 3, 2022 When I want to crop challenging images, I work with brushes and masks. But sometimes I need a quick crop for screen presentations or tutorials, and removing the white background is very helpful. Then I'll probably continue to work with a copy of the white parts of the image to be preserved, and of course I create these with the selection brush and sometimes with the magic wand, depending on the situation. Postscript: Just realized that it's enough to put a selection around the area to be protected and then invert the selection before using the "remove white parts of the image" filter. So it is very usable after all ... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.