GRAFIKATI Posted August 3, 2020 Share Posted August 3, 2020 Hei, I wanted to start working in Affinity apps (all three), but encountered a serious problem right from the start: colours don't match. The ones on the working space in Affinity are clearly desaturated while after exporting they visibly gain saturation. Adobe, previously used by me, also displays nice saturated colours. I have everywhere set the sRGB profile, except my Eizo monitor (from which screenshots), which has been calibrated with Spyder and has it's own profile. Surprisingly though, when I switch the monitor to sRGB, the colour difference is even bigger. Can you please help? Or at least tell me if/where I can switch of display colour conversion in Affinity programs. Regards, Kati Quote Link to comment Share on other sites More sharing options...
Staff Dan C Posted August 4, 2020 Staff Share Posted August 4, 2020 Hi @GRAFIKATI, Welcome to the forums I'm very sorry to see you're having trouble! Can you please follow the advice at the below link in regards to colour management in Affinity, and let me know if using this setup method resolves your issue? https://affinityspotlight.com/article/display-colour-management-in-the-affinity-apps/ Many thanks in advance! Quote Please note - I am currently out of the office for a short while whilst recovering from surgery (nothing serious!), therefore will not be available on the Forums during this time. Should you require a response from the team in a thread I have previously replied in - please Create a New Thread and our team will be sure to reply as soon as possible. Many thanks! Link to comment Share on other sites More sharing options...
Pšenda Posted August 4, 2020 Share Posted August 4, 2020 14 hours ago, GRAFIKATI said: I have everywhere set the sRGB profile, except my Eizo monitor (from which screenshots), which has been calibrated with Spyder and has it's own profile. Surprisingly though, when I switch the monitor to sRGB, the colour difference is even bigger. Do you mean profile for monitor in OS, or monitor settings? Quote Affinity Store (MSI/EXE): Affinity Suite (ADe, APh, APu) 2.4.0.2301 Dell OptiPlex 7060, i5-8500 3.00 GHz, 16 GB, Intel UHD Graphics 630, Dell P2417H 1920 x 1080, Windows 11 Pro, Version 23H2, Build 22631.3155. Dell Latitude E5570, i5-6440HQ 2.60 GHz, 8 GB, Intel HD Graphics 530, 1920 x 1080, Windows 11 Pro, Version 23H2, Build 22631.3155. Intel NUC5PGYH, Pentium N3700 2.40 GHz, 8 GB, Intel HD Graphics, EIZO EV2456 1920 x 1200, Windows 10 Pro, Version 21H1, Build 19043.2130. Link to comment Share on other sites More sharing options...
GRAFIKATI Posted August 8, 2020 Author Share Posted August 8, 2020 On 8/4/2020 at 12:48 PM, Pšenda said: Do you mean profile for monitor in OS, or monitor settings? It's the same. When I change it in the monitor settings it automatically changes in OS, and vice versa. Quote Link to comment Share on other sites More sharing options...
GRAFIKATI Posted August 8, 2020 Author Share Posted August 8, 2020 On 8/4/2020 at 12:40 PM, Dan C said: Hi @GRAFIKATI, Welcome to the forums I'm very sorry to see you're having trouble! Can you please follow the advice at the below link in regards to colour management in Affinity, and let me know if using this setup method resolves your issue? https://affinityspotlight.com/article/display-colour-management-in-the-affinity-apps/ Many thanks in advance! Hei, I followed the steps and unfortunatelly nothing's changed - the colours still don't match and they are gray-ish in the app workspace. Quote Link to comment Share on other sites More sharing options...
Pšenda Posted August 8, 2020 Share Posted August 8, 2020 1 hour ago, GRAFIKATI said: It's the same. When I change it in the monitor settings it automatically changes in OS, and vice versa. I think you're wrong. Setting up a profile in the OS is something completely different from setting up a monitor. Quote Affinity Store (MSI/EXE): Affinity Suite (ADe, APh, APu) 2.4.0.2301 Dell OptiPlex 7060, i5-8500 3.00 GHz, 16 GB, Intel UHD Graphics 630, Dell P2417H 1920 x 1080, Windows 11 Pro, Version 23H2, Build 22631.3155. Dell Latitude E5570, i5-6440HQ 2.60 GHz, 8 GB, Intel HD Graphics 530, 1920 x 1080, Windows 11 Pro, Version 23H2, Build 22631.3155. Intel NUC5PGYH, Pentium N3700 2.40 GHz, 8 GB, Intel HD Graphics, EIZO EV2456 1920 x 1200, Windows 10 Pro, Version 21H1, Build 19043.2130. Link to comment Share on other sites More sharing options...
GRAFIKATI Posted August 9, 2020 Author Share Posted August 9, 2020 22 hours ago, Pšenda said: I think you're wrong. Setting up a profile in the OS is something completely different from setting up a monitor. Oh, well, ok. Than if you'd please write something more on the subject I would greatly appreciaciate the advice. Quote Link to comment Share on other sites More sharing options...
thomaso Posted August 9, 2020 Share Posted August 9, 2020 On 8/3/2020 at 10:13 PM, GRAFIKATI said: I have everywhere set the sRGB profile, except my Eizo monitor Regardless of hardware and Windows OS: Do you mean with "everywhere" that you have set also the document color spaces & profiles identical, and for export, too? I wonder because in your screenshot at least the APh document shows a CMYK space + profile ("Coated FOGRA 39..."). Also, when viewing an exported PDF and unless you exported as PDF/X, make sure the viewing app (e.g. Acrobat) has set the same profile to display the PDF as you have selected for export. Quote macOS 10.14.6 | MacBookPro Retina 15" | Eizo 27" | Affinity V1 Link to comment Share on other sites More sharing options...
Staff Dan C Posted August 10, 2020 Staff Share Posted August 10, 2020 On 8/8/2020 at 10:28 PM, GRAFIKATI said: I followed the steps and unfortunatelly nothing's changed - the colours still don't match and they are gray-ish in the app workspace. Sorry to hear this, can you please try the steps at the below post (for whichever monitor you're using Affinity on)? Many thanks! Quote Please note - I am currently out of the office for a short while whilst recovering from surgery (nothing serious!), therefore will not be available on the Forums during this time. Should you require a response from the team in a thread I have previously replied in - please Create a New Thread and our team will be sure to reply as soon as possible. Many thanks! Link to comment Share on other sites More sharing options...
walt.farrell Posted August 10, 2020 Share Posted August 10, 2020 I think that @thomaso may be on the right track in noting that the base document is in CMYK. What color format was used for the PDF export? (Also, @Dan C in the second screenshot in the original post, the colors in the workspace and in the navigator are different, with the navigator showing brighter colors that seem (to me) to match the PDF export. Wasn't there a time when the navigator always displayed in RGB, even for CMYK files? That could be another clue.) Quote -- Walt Designer, Photo, and Publisher V1 and V2 at latest retail and beta releases PC: Desktop: Windows 11 Pro, version 23H2, 64GB memory, AMD Ryzen 9 5900 12-Core @ 3.00 GHz, NVIDIA GeForce RTX 3090 Laptop: Windows 11 Pro, version 23H2, 32GB memory, Intel Core i7-10750H @ 2.60GHz, Intel UHD Graphics Comet Lake GT2 and NVIDIA GeForce RTX 3070 Laptop GPU. iPad: iPad Pro M1, 12.9": iPadOS 17.4.1, Apple Pencil 2, Magic Keyboard Mac: 2023 M2 MacBook Air 15", 16GB memory, macOS Sonoma 14.4.1 Link to comment Share on other sites More sharing options...
Staff Dan C Posted August 10, 2020 Staff Share Posted August 10, 2020 2 minutes ago, walt.farrell said: Wasn't there a time when the navigator always displayed in RGB, even for CMYK files? If this was an issue previously then I don't think it exists currently - I don't believe the Navigator uses the same colour conversion that the canvas in Affinity uses, which is why the navigator appears 'correct'. I've seen this before when users have 'off whites', the canvas looks yellow but the navigator looks correct and 9/10 times it's a colour profile issue with the on screen conversion walt.farrell 1 Quote Please note - I am currently out of the office for a short while whilst recovering from surgery (nothing serious!), therefore will not be available on the Forums during this time. Should you require a response from the team in a thread I have previously replied in - please Create a New Thread and our team will be sure to reply as soon as possible. Many thanks! Link to comment Share on other sites More sharing options...
GRAFIKATI Posted August 11, 2020 Author Share Posted August 11, 2020 On 8/10/2020 at 11:30 AM, Dan C said: Sorry to hear this, can you please try the steps at the below post (for whichever monitor you're using Affinity on)? Many thanks! It looks like it finally worked! Thank you so much! I was switching those profiles in Windows before but didn't restart the app. I assumed that, since the screen and other app colours changed and at the smae time they didn't in Affinity, the issue was somewhere else. Still, there seems to be an issue with colour conversion in the app when using calibration profile for the monitor, and I know I'm not the only one experiencing it. I have no idea where and why it goes wrong but maybe it would be good to have it resolved. Is there any way to forward the issue to Affinity developers? Dan C 1 Quote Link to comment Share on other sites More sharing options...
Staff Dan C Posted August 12, 2020 Staff Share Posted August 12, 2020 12 hours ago, GRAFIKATI said: It looks like it finally worked! Thank you so much! I'm glad to hear this, many thanks for letting me know 12 hours ago, GRAFIKATI said: Still, there seems to be an issue with colour conversion in the app when using calibration profile for the monitor, and I know I'm not the only one experiencing it. I have no idea where and why it goes wrong but maybe it would be good to have it resolved. Is there any way to forward the issue to Affinity developers? You can post any bugs in the below section of the Forums, these will be passed through to our developers https://forum.affinity.serif.com/index.php?/forum/71-bug-reporting/ Quote Please note - I am currently out of the office for a short while whilst recovering from surgery (nothing serious!), therefore will not be available on the Forums during this time. Should you require a response from the team in a thread I have previously replied in - please Create a New Thread and our team will be sure to reply as soon as possible. Many thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.