Search the Community
Showing results for tags 'importing'.
-
Hello, I have just bought AP2 and Word Mac (2021). When I try to import text, say, in Calibri into AP I get a "? Calibri". Calibri and other Word fonts are not visible in the list of fonts in AP but are visible in Word. And Word will print them (ie, not substituting). Yet Calibri is not visible in Font Book either. How to I get the Word fonts into AP2? Help for this newbie would be appreciated.
- 15 replies
-
Hello! I work a lot creating videos for social media and sometimes we need to alter the information of the screenshot, so I wanted to know if this is possible. In the example below, I've selected an area and I want to quick import an image to this area with the same size as well, this is possible? Like when you put a image on a mask and want to keep the image size but to replace it. How I do this on Affinity Photo? Cheers,
-
When I copy a .PDF file into a blank document it is not editable as far as I can see. I have set resolution at 300DPI at both ends. I cannot find how you set read as text. (searched the import page). If I can make this work reasonably well I will buy Affinity. Thanks Chris Charles Gardiner jnr.afpub
- 18 replies
-
I am using the iPad Pro 12.9, 2021. I was wanting to know how to import a file, edit it then export it while still having the original file creation date and all the gps data still intact?
- 1 reply
-
- gps
- filecreation
-
(and 1 more)
Tagged with:
-
Hello! For the past few hours I have been searching for a solution to the problem of importing an affinity designer SVG file into blender. I can import the file but it doesn't process the right way in blender. All the layers are mixed up, curves that are pasted inside other curves protrude. I have looked through the forums and have watched YouTube videos but none of the fixes seem to address this issue. I very much appreciate any suggestions on how to solve this.
-
Hello all, I've created a batch of brushes in Photoshop that have textures applied to them in the Brush Settings panel. I made the textures by hand, scanned them, then made them into pattern textures in Photoshop. I exported these brushes as an ABR file and tried to import them into Affinity Photo, but the textures haven't translated across. I don't really want to have to create these texture brushes from scratch in Affinity, so does anyone know if importing texture brushes is supported by Affinity? If so, how do I do this? Any thoughts would be much appreciated! Thanks very much
-
Hello guys. I'm having an error message importing an Asset File into Affinity Designer. I'm getting this error message shown on screen below. Any solutions to this? I desperately need the file inside the Asset Library.
-
Hey everyone! When importing a symbol from another file (copy and paste), Designer crashes. I am using iPad mini 5, iOS 13.4.1, Designer 1.7.1. Best wishes, Shu
-
Hi Guys Just a quick question is there anything in development for installing .ACO Swatches from Adobe products into Designer, Photo and Publisher also the ability to import .pat files the latter not to concerned about. .aco would be a game changer for many companies considering the jump to Affinity. Many thanks Mark
-
LUT Importing Needs Upgrading
Jamie-Lynn posted a topic in Feedback for Affinity Photo V1 on Desktop
Newer user here. I am from the world of Lightroom where I love presets to modify images. Unless I'm mistaken, is there NO easier way to import LUTs into Affinity Photo then going one-at-a-time down the list of .cube files I have found? To top it off I can't preview the modifications so if I have 100+ files, I am blindly going down the list and saving them one at a time. This is very inefficient for anyone- noob or master photographer. Regards, -
Hi, Suggestion: To allow user to create or assign to existing grouping/Category label when importing LUTs - May 6, 2020 Reason:- Being able to group the related LUTs together will help the user to put all the related LUTs together and find and use them much easier. The problem of not able to group the related LUTs together when an additional LUTs created, purchased later date or revision made to the existing LUTs file. Without the Grouping feature, such cannot be easily grouped together. With the current setup, in order to group them together, i have to delete the related LUTs presets that were imported before, and then re-import them plus the new one to get the grouping together. e.g. if i have these 6 LUTs to import. said, Warm1.cube, Warm2.cube, Cine1.cube, Cine2.cube, Cool1.cube, Cool2.cube. I intentionally import the order incorrectly just to show my point. For this example, i am hoping to group/category the above 6 LUTs under "Warm Tones", "Cinematic Tones" & "Cool Tones" See the attached file "LUTS_Grouping_Before.jpg" of screenshot of the how the current added LUTS preset that appears as per the order of insertion. i.e Cine01, Cool2, Warm1, Warm2, Cine2, Cool1 in order to get the correct grouping, i need to delete Cine01, Cool2, Cine2 first, then re-import the Cool2, Cine1, Cine2 to get the grouping corrected (Warm1, Warm2, Cool1, Cool2, Cine1, Cine2) as per attached file "LUTs_Grouping_After.jpg" When the Grouping/Category Label feature is implemented in the Photo Persona, I should see the related LUTs presets displayed in the following manner. By default, the Grouping/Category label is sorted in Ascending order:- ...... Cinematic Tone Cine1 Cine2 Cool Tone Cool1 Cool2 Warm Tone Warm1 Warm2 ...... Thank you.
-
- luts
- affinity photo
-
(and 3 more)
Tagged with:
-
I am translating a comic series consisting of several PSD files, and found putting all pages in a single afpub file is convenient as I don't have to reload pre-defined paragraph styles again and again. However when I tried to batch import, I found "Add Pages from File" only allows me to select one PSD a time. Hope this could be fixed, so that I wouldn't doing the same openrations repeatedly.
-
I got a different problem now. I created a handwritten logo in procreate and imported it as a psd file to affinity. That works fine, but when i try to resize it to put it in a corner of a photo it gets really bad and you can see them pixel. What am I doing wrong here?
-
Hello, I was hoping someone might be able to help. I'm fairly new to using Affinity Photo/Design and Publisher on OSX. Recently, I imported an old PSD template file with multiple layers into Affinity Photo 1.7.3 and it looked absolutely perfect! After adding a few extra logos as layers, i saved the file as both PSD and also as standard Affinity Photo file (AFPhoto) and for some reason when i open the PSD file, all the extra layers I added are shown, but the source files in those layers are missing (blank). I'm not sure why it would be doing this as when i saved the file everything was showing up correctly. Although when opening the AFPhoto file it all looks fine. It would be great to have copies of the files in both PSD and AFPhoto format, and I would be very grateful if anyone can help me figure out why the files are missing when exporting and reloading as PSD. Maybe i'm missing a step somewhere, but i though everything would be self-contained in the PSD file when saving? (My only guess is that i copied the layer images files to clipboard and then pasted this into the layer files. Could this be part of the problem?) Any help would be much appreciated, thanks!
- 1 reply
-
- layers
- affinity photo
-
(and 3 more)
Tagged with:
-
Hello everyone! I've purchased and downloaded from the Affinity Store the following brushes: Blast Powder Brushes by Ian Barnard DAUB® Watercolours & Washes which are supposed to be compatible with both Affinity Photo and Designer. They appear in Affinity Photo but NOT in Designer. I go to Brushes > Import Brushes and choose the right files. A window then appears, saying the "Brushes imported successfully". I've done this more than once and every time a number is added at the end of the brush-set name like it already exists and is being added more that once. In the image I attach you can see the 6 in the end meaning I tried 6 times to add the specific brush set but it is still not showing up in my Brushes. Is anyone facing the same problem? Thanks in advance!
-
I imported a file from my photos folder into Publisher and everything was fine. Printed it all out, worked great. When I went back to the Publisher file today it look extremely pixelated. Can someone help me as to what is going on? I didn't move then image in the Finder (if that even makes any difference.)
-
Good evening, new to AD for iPad Pro as of this week and I’m running into a wee problem. I purchased the Vector Brush Toolbox from Retro Supply Co, and I’m having issues trying to import the brushes after opening the purchased files. When I go to import in the Brushes Panel, the brushes are greyed out and I can’t install. Is there a compatibility issue? Thanks.
- 1 reply
-
- importing
- retrosupply
-
(and 1 more)
Tagged with:
-
While waiting for Publisher I have been editing a book with text and photos in Blurb's Bookwright programme. When Publisher arrives, will I be able to export my book in Pdf form from Bookwright, open it in Publisher and continue to edit it (I am far from finished...)?
- 13 replies
-
- bookwright
-
(and 1 more)
Tagged with:
-
Hi, I'm new to Affinity Photo for Desktop (also have iPad version, but barely used it yet). I imported file containing .abr brushes successfully,, but after importing the second & third batch, they didn't show up in AP. Why? Could it be that they are Vector brushes & not Pixel brushes, or is there another problem? After "Import> select> Open" 'AP' did said that they were "successfully imported", but they're not visible. Also, If I want to keep different brush packs separate, or have similar types of brushes grouped together, should i create a new category first & then while that category is 'open', add new brushes to it? Apologies if this has been asked and answered somewhere before. I did some searching, but didn't find what I was looking for.