Dan C

Hi Dan, thanks for verifying so quickly. Very cool that you’re responding to this so fast. For now I can use 2.2.1, so all is good. ☺️

Hi @wolboe,
Thanks for your report!
I can confirm that I'm seeing the same behaviour, but interestingly the issue appears to be that the search does not automatically 're-hide' after selecting a search result.
For example, if you enter your search term, then select the result from the list - now tap the three line 'hamburger menu' in the top left of the screen to hide the search and you should find that the selected page is shown.
I'll be logging this with our team now, I hope this helps

Thanks for raising this here Mike, I've replied to the thread in question.
I hope this helps

Hi @wolboe,
Thanks for your report!
I can confirm that I'm seeing the same behaviour, but interestingly the issue appears to be that the search does not automatically 're-hide' after selecting a search result.
For example, if you enter your search term, then select the result from the list - now tap the three line 'hamburger menu' in the top left of the screen to hide the search and you should find that the selected page is shown.
I'll be logging this with our team now, I hope this helps

Here's an .ASE spot color palette created in VectorStyler, spot.ase imports as a spot color swatch on macOS, and process color swatch on Windows.
spot.ase

1. Which Operating System version are you using? (MacOS 14.1.1)
2. Which version of Affinity did the file last get saved in? (1.10.8)
3. What drive type was the file last saved to? (Local disk)
 

My apologies for any confusion caused, I can verify this is still currently logged as a requested improvement with our development team, however our recent update has also resolved may Artboard Bleed export issues.
I've 'bumped' this improvement request with our development team to bring it to their attention once again for you

Thank you.  This seems to have resolved the problem.  Keep up the good work.  I love Affinity Photo!

This is my effort using Document/ Add Pages from File
Windows V1.10.6
00Goldsetterintromasterclass-recovered.zip

Updated to 2.3.0 recently. The issues in this thread has been fixed. 
Thank you!!

Using Designer 2.3, have had a complete crash while scrolling Pixabay.  When asked whether I wanted to recover the file, found a completely empty screen.  Just an update.

When I reboot the computer, the programs run.
 
 
 

As I wrote above - for me the constant/dynamic change of the label with the color value is annoying. But I understand that for many users, displaying captured color in a larger area may be desirable and useful.
So that the picker behavior does not have to be turned on and off in the Preferences, I will allow myself a compromise proposal - the label still has the same color (depending on the UI dark/light mode, the text is white on a dark background, or black on a light background), and after pressing the modifier key (Alt is offered), the entire content magnifiers will filled with captured color, so the captured color will be displayed in a large area - compared to a small label even significantly larger, and the color will be displayed in the context of the location of the color and its surroundings.

OK - pour moi les options sont importantes car quand je scanne des factures (exemple) j'ai pas envie de les ouvrir sous affinity photo pour les exporter en PDF ensuite, mais je passerai par Transfert d'images en attendant - merci bq Dan. Bonne soirée

Merci beaucoup d'avoir essayé cela pour moi - j'ai demandé à un collègue de tester cela en interne et bien que ce ne soit pas exactement le même problème, nous constatons une corruption lors de l'importation d'une image à l'aide d'Aquire et cela a donc été enregistré comme un bug de notre développement. équipe.
En ce qui concerne les options mises en évidence, il est prévu qu'elles ne s'affichent pas lors de l'utilisation de cette boîte de dialogue dans l'application Affinity, car l'image numérisée n'est pas enregistrée dans un document, elle est importée directement sur le canevas - ces options ne sont donc pas obligatoires.
J'espère que cela clarifie les choses

Hey, I just noticed that my "if, then" logic might be actually incorrect. I was a bit in a hurry while testing and then typing the post…  
I may need to repeat the test to confirm the above logic.
But the rough numerical values are still about right, nonetheless.

This is why I understand the change was implemented also, to better display to the user the exact colour being sampled, when the 'picker' loupe itself may not be as clear - or if you have it set to sample from a larger pixel area, the label is now coloured with the colour that will be picked as a helpful reference to the user.
I understand however this might not be the desired behaviour for all users and I'll be sure to pass this feedback through to our dev team, as I understand we're looking at further ways to continue to improve the colour picker tool (some of these changes were previously implemented and subsequently removed during a beta cycle, as our team wasn't yet happy with the changes internally.)
Many thanks for this information, I suspect out developers will know more about the actual specifics, however I'll be sure to link to this information within the development report also - as mentioned this is logged as a bug with our team, as this text should remain readable, when the picker is displaying the to-be-picked colour.

macOS 12.7.1

Welcome to the Affinity Forums @Sapfromcornwall 
I've tested this using both .JPG and .afphoto files on macOS Sonoma, and I'm seeing the following behaviour:
When opening a JPEG (or other image file) the last known state will be used for these View > Show Grid / Show Pixel Grid options - for example if you open one image and enable both View options, then close this image and open 5 more images, all 5 will be opened with the options enabled.
  When opening an .afphoto file, the last saved state for that file will be used - the .afphoto format recalls if the View > Grid option was enabled on a file by file basis, so if you disable the View options, save, close and reopen the same file you should find these remain disabled. If you're still uncertain or seeing different behaviour from the above, can you please provide a screen recording showing the exact steps you're taking?
If you're unsure how to take a screen recording, please check out our FAQ linked below - 
Many thanks in advance!

Thanks for that! It seems it was somehow a preview link for the screenshot file in Dropbox (which I use to transfer files between iPad/Windows), rather than the actual file itself - as I'm logged into the Dropbox account the image was visible, but not for other users.
It should be a regular screenshot attachment now

Interesting. In case this is something you care to check, on my laptop I see this even after a Refresh:

On my iPad, it's a large empty bounding box with p.png in the upper left, and a small blue square with a ? in the middle.
 

Danke für Ihr Interesse. Es scheint ein Wunder geschehen zu sein. Heute Vormittag installierte ich das Update von Publisher 2.3.0. Danach habe ich Testdateien angelegt und wie oben beschrieben damit gearbeitet. Nach der 6. Datei habe ich dann mit dem Versuch aufgehört, da der Publisher wie gewünscht funktioniert hat. Ich konnte die PDF-Dateien ersetzen, die Beschnittboxen verschieben und verändern, ohne dass das Programm sich aufgehängt hat. 
Nun hoffe ich, dass es auch in Zukunft so stabil arbeiten wird. Das wäre sehr angenehm und nervenschonend. 
Viele Grüsse 

Thanks, Dan. That article helped me find a way to do a big enough refresh to resolve it. A simple Refresh didn't.
The method I used was:
Switch Airplane mode On. Refresh the page (to cause a failure) Switch Airplane mode Off. Refresh again. Which gave: 

Edit:  I presume that matches what your screenshot would have shown if it had attached successfully  

Salut @Yulunga,
Bienvenue sur les forums d'Affinity
La fonction « Acquérir une image » dans Affinity utilise simplement l'API macOS Image Capture pour numériser des documents, ce qui signifie qu'elle est contrôlée par macOS et le pilote de votre scanner, plutôt que par l'application Affinity elle-même.
Je recommanderais de désinstaller votre pilote actuel, puis de télécharger une nouvelle copie du dernier pilote sur le site Web du fabricant, d'installer le pilote, puis de redémarrer votre Mac.
Si ce problème persiste, essayez d'utiliser la boîte de dialogue Capture d'image en dehors de l'application Affinity et faites-moi savoir si cela donne des résultats différents.
Merci d'avance!

Just to confirm, this issue has been logged with our dev team - it doesn't seem to be Windows 11 specific, but can vary depending on the exact colour values used and your monitor profile.
I hope this helps