Jump to content

Doctez

Members
  • Content count

    24
  • Joined

  • Last visited

Everything posted by Doctez

  1. You can do that with: CTRL+ALT+SHIFT+S I've also need that but I find this solution... Maybe a quickly way like an icon can be better...
  2. Hi, I'll write here all the wrong translation that I will found on the two programs! Thanks! Photo: ABILITà "Salva" su file PSD importati - to be - Abilita "Salva" su file PSD importati (In Preference -> General) Seleziona - to be - Selezione (in Photo Persona) up between Livello (Level) and Disposizione (Disposition)) Designer: Seleziona - to be - Selezione (in Photo Persona) up between Livello (Level) and Disposizione (Disposition)) Smarginatura - to be - Pagina al vivo (in Document Setup)
  3. +1 but I think they will add this feature when they will finish to develop the Affinity "Lightroom" that they have on roadmap. So we need to wait!
  4. Hi, I ask if you can implement the voice of "Bleed" also in the "New Document" Panel. Another thing: The translation isn't correct at 100%: "Bleed" is to translate with "Pagina al vivo" and not with "Smarginatura". It is correct but in Italy nobody use Smarginatura when we're talking about the part that will be cutted. Thanks
  5. To resolve that maybe a voice in options can be useful... If it is possible to implement!
  6. Are you sure that you have to pay 55€ per year with Affinity? Where you read it? EDIT: However 145€ is not "a bit more than 100€"
  7. Hi all, that's my suggestions =D Blemish removal tool: I suggest you to let it can be dragged so who want to go only with circles like now can do that or, who want to make shapes (a cable that can be present in a background), can also do that... and maybe it can have the editable destination like the Develop Persona's "Blemish removal tool" Adobe Camera RAW save the corrections in metadata (if at the end you click close or open and not cancel if you re-open the file you keep have the corrections) and have the work in sync (open all the shots you want, select all of them and work: ACR make the edit on all the photos until you doesn't deselect)... Hope you support plu-gin and panels (like TK panels or Beauty Retouch) soon (Luminosity masks are really useful but now you've implemented only one level for lights, half and shadow (Wow!) more (5 levels of selection) for them will be more useful! Masks now can't be edit with exposure or curves (or maybe I am simply unable) but if I select the light luminosity mask and I want to let it be more selective I have to contrast that or take down the exposition... Now I can't do that. Make the Studio's tools can be grouped like we want, if i want the selective brush and the magic wand or gradient+flood fill in the same group now I can't. Refine Mask: Can you add the possibility to save the last settings with a to-flag square please? Tab button hide/show the work space... But if I'm changing settings with keyboard like in Refine selection and I want to go simply to the next voice I can't use tab... Bug or your chose? Hope you can fix this letting me go down or up simply using Tab For the moment that's all... If I found other things I'll write
  8. Ahem... 35€ per month. Other programs want a payment for life... Where's the convenience?
  9. Hi Guys, sorry in advance for my bad english I'm trying the trial version about Affinity Photo and that is what I found that doesn't work well: - Editing size and hardness of brush is really annoying: in PS I just need to right-click and fix how I want or Alt+right-click to edit in the fastest way the settings. Can you implement this in the next version? - Studio editing is pretty good but I can't group the tools, for example: if I want that all the tools selection are in a single group I can't do it, in PS I just need to drag them in a tool's icon tool to make them stay together. - The Blemish Removal tool works only with circles and I can't drag that... Under, in the info, there also written DRAG: bug or drag is just to select where Photo have to take the pixels to correct? IMHO Should be a brush... - During the selection work on PS if I press Shift I can add the next drag to my selection, if I use Alt I will delete. Can you implement also that please? - Develop Persona: There's somethings that doens't work good: I can't work simultaneously on more raws image (if I have a sequence I want to edit in the same way all the shots in syncro...) The raw edited can't be closed and worked later: I'll lose all my corrections. Can you fix that? Just like the .xmp files of ACR or in the metadata like LR I can't find the HSL panel that I use really much on PS or LR, can you implement please? Last thing: can you encourage people to create panels also for you? TK Panels and Beauty Retouch is a must for my workflow in landscape and portrait..! However Affinity Photo is a really, really, REALLY good: Smooth, fast, unexpensive, etc. If I think that you are just at 1.5 version... Wow. Keep up to good work! When you'll fix this problems I'll surely buy and incentivate my friends to buy the program. Thanks to have made a good competitor of Photoshop! =D
  10. Doctez

    My suggestions for AP

    K, hope u find that useful and a good suggestion for the next versions
  11. So ok, you could be right but I'm still requesting that the edit of the raw have to not be cancelled after I press Develop: I really need to open the RAW editor more than once time... I also can use Lightroom and after open to Affinity but I find more useful have the editing within a click...
  12. Because after you press Develop, the RAW become an RGB file, like a jpg.
  13. But If at the end of the blending action I'm not satisfied for some edit (too less shadow recovery and with a jpg I can't recovery the shadow like a raw, tint, clarity, etc.) I just need to do a double click on one object to open it with all my edit and fix it (also more times until I'm satisfied) instead of open again the raw, try to remember all my edit (or load it one sheet per one), fix what I think is wrong, press ok insert it to the file to work, apply the mask and hope that's good because if it isn't I have to re-made all this steps again and again...
  14. Doctez

    My suggestions for AP

    Mmh... That's not the way that I think... Please check my video in attachment to understand Video_2017-10-30_102258.wmv
  15. Ok, I know that, it's just .psd for AP and that's not a problem to understand but in PSD the raw can be opened as Special Object and with 2 clicks on that level and PS open Camera Raw with all the edit as you done it and ready to be changed. There's also the possibility to "Duplicate a copy of the object" to have the same raw (without enlarge the size or engraving the pc performance) ready to be edited in two way completely different and later with mask you can blend them together [I can do a raw-edit for the shadow and midtones with cold mood and, duplicating the raw, you change only the Temperature and the tint (keeping the edit below intact) to edit the shot for a warm light. After that with luminosity masks you can blend the second raw only with lights powering the contrast]. When I'm at home this evening I'll upload a .psd file of my last shot to let you understand how I work a landscape with high contrast
  16. Ok, We need to change and I agreed on that. But if I can't work also with adjustement levels on my raw I lose MUCH potential of my camera recovery. And, again, if my raw become instantly a jpg and I lose all my edit data of my raw what benefits I'll have saving that as .afphoto?
  17. Ok I've understand your way to work. But in a landscape shot I need that I can edit my RAW also after many actions... I also need that the raw do not become a jpg because I often need to create two edit of the same shot and blend it later or edit and I lose all my shadow recovery potential... So if you don't want to let that AP save the edit (mah...) please let me use the RAW with edit while I'm processing it... However you tell me that I need to save the file as .afphoto but I will have a simply file (of 200MB) without my edit included but only with the results of them in a bigger JPG... I don't find it useful... maybe if I upload one of my work you can understand why I need so much that my raw still stay that until I don't save or until I press Ctrl+shift+alt+E EDIT: I don't know how much you stay or how you work on your shots but trust me that people like Enrico Fossati, Mythlands, etc. work on their raw more than once because the step to transform it in a jpg is just after many levels...
  18. Doctez

    My suggestions for AP

    Hi, sorry but I haven't understand you message... How to apply the curves adj. to the mask? If I select the mask then click con adjustement and click curves them go to change my photo and don't the mask...
  19. Because in a wedding work I can't post-product all in a working day... So I open all the shots in (now) ACR and, selecting all the raws, apply my default settings and delete the wrong shots and I press close so my shots will be ready to be worked and deleted in only one step. After this I open stage per stage applying to all the shots of that more accurately corrections and I make a more thorough selection... So on for all the stages and after all of that I begin to work the remained shots (the best) in PS. So I open the raw 3-4 times
  20. Ok but I don't find clever and fluid that everytime I re-open the same RAW I have to rework or re-apply sheets per sheets... And After 5 - 6 events with more than 10 stage per events I'll have 60 presets where I have to found every time the right preset... Repeat: I don't find this solution logic...
  21. But I have to save presets for every sheets and apply one per one when I re-open the file... That's not logic or clever, imho...
  22. @R C-R: You have understood wrong, MEB gone right Thanks you at the same @MEB: Thanks you and sorry if I don't found those things before! =) u're welcome. 3: Ok so I've understood right... I suggest you to let it can be dragged so who want to go only with circles can do that or who want to make sharp can also do that... and maybe it can have the editable destination like the Develop Persona's "Blemish removal tool" 5: Adobe Camera RAW save the corrections in metadata (if at the end you click close or open and not cancel if you re-open the file you keep have the corrections) and have the work in sync (open all the shots you want, select all of them and work: ACR make the edit on all the photos until you doesn't deselect)... Hope you support them soon (Luminosity masks are really useful but now you've implemented only one level for lights, half and shadow (Wow!) more (6 level of selection) for them will be more useful! Thanks you for the patience and speed to answer =D I still want to renew the compliments EDIT: If there's the correct place, meanwhile I work in this trial with AP I write all the suggestion I found =)
×

Important Information

These are the Terms of Use you will be asked to agree to if you join the forum. | Privacy Policy | Guidelines | We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.