Jump to content

skyking

Members
  • Content Count

    67
  • Joined

  • Last visited

Everything posted by skyking

  1. Walt - thanks for the info. I’ll try that later today and let you know how I make. I’m not sure how I’ll add a page in front of the first page. Thanks!’ James K
  2. I can not figure a way to print spreads. Printing "Book" or "Booklet" does not work as it prints the low numbers on the right of the paper and the high numbers of the book on the other side. In other words, for an 8.5 x 11 sheet, landscape, book and booklet printed the start of the book on the right side of the page and halfway through the end of the book to the middle on the left side of the page. I finally had to create a PDF and was able to print it via Preview. Any help would be appreciated. Thanks James K
  3. As a Final - Here is what I discovered. I had assigned a icc profile for "sheetfed uncoated". I went into document set up and assigned a profile of "Generic CMYK". When I printed text was solid - no screening. I suspect when printing "Sheetfed uncoated" the program assumes you are sending off to a RIP which will do some conversions. When I create a PDF I always do NOT include any profile and the printer (via prepress) will assign their own press or digital profile. This solves a problem!! Thanks again for everyones input. This was a very good discussion. Jim K
  4. Thanks to all for all the investigative work. I'll be messing more based on some of the tilts all have provided. I indicated in an earlier pay usually when sending files too PrePress we send as a PDF gone are the days off sending folders with everything - at least in most cases. It just bugged me that when printing from InDesign text was printed solid but with publisher it was screen. I'll post some of my results. Jim K
  5. Lagarto - great info. I know any file I create, for example, an Indigo it has to be in CMYK not RGB. If I pirnt from Publisher to my brother printer I get text screening. If I pirnt from InDesign I don’t get text screening. Based on your comments, I’m going to recheck my prefs and icc profiles. Jim K
  6. A_B_C - Thats a good point that I will check out; however, when printing from Acrobat Pro it prints fine. I do know some lasers will do that conversation but I'm not sure mine does. I have to check it out and thanks! Jim K
  7. Thanks MikeW and FirstDefense. Actually I would have exported to PDF (as I usually do when uploading work to our PrePress; however, in this case the sheet size was 4.75 x 7.5 and being printed on a 8-1/2 x 11 sheet. Unfortunately would not allow me to put crop marks, etc., so when I printed I didn't get that. Thanks again!! JimK
  8. I had not noticed this before but under a Loupe I saw that my 100% black text was being screened (Halftoned) in Publisher, Photo and Designer. BTW, I can see this in Photoshop as well so I'm not blaming Affinity totally! The images attached were printed from Publisher to a Brother color laser printer. The color was CMYK printing the text at 100% Black. I have checked everything in publisher (photo and Designer) and everything is set correct. Just to cut through the chase I work in the printing industry and have for many years so this caught me by surprised. I can export the document as a PDF and when printed on the same printer the text prints solid not screened. Any ideas on this or is anyone else experiencing this?? Thanks Jim K
  9. Not sure why this is happening but I create black text (100% K for CMYK) when I print to a laser printer it prints the text as screened text. I have tried everything and can't seem to figure why Publisher is doing that. Opacity is at 100%, etc. Anybody got ideas?? Thanks JK
  10. Please Affinity - if you eventually come out with a work book make it a spiral bound book, not perfect bound. Spiral bound book is so much easier to work with - lays flat, etc. The perfect bound is hard to keep open!! So far Loving Publisher and the Studio!! James
  11. Thanks!! I thought that was the case but wanted to check in case I missed something. Thanks again James
  12. I know how to create spot colors (non PMS colors) in Designer on the Mac but I can’t figure how to create a spot color in Designer on my iPad Pro. Any is there a way?? James
  13. Gabe, Great and thanks. I do hope the developers can figure out the issue. I have it with all three products (Photo, Designer and Publisher Beta). Thanks again, Jim
  14. Thanks for your reply. PrePress? Me? As a student at RIT in the 60’s my first part time job was setting Linotype 3 days a week!! I use a lot of targets for press and paper testing as well digital equipment testing. Not the norm I would agree but many others in the printing do for the same reason. I always want a good competitor to Adobe and hope for Affinity to be that. Thanks again for your reply and agree, I think Serif needs to address this issue. Jim
  15. Designer, Photo and even Publisher Beta has issues with importing prepress or print targets. When Importing the app will just freeze at the importing window or if the EPS is imported it is incorrect, missing elements or converts colors such as 100% black to 400% black. If all three programs are going to work in the printing industry these targets must work! I have attached a sample EPS target. Something with the core programs must have a problem interpreting the EPS files. I'd be interesting in Serifs thoughts. Jim K VS1P07U.EPS
  16. I did download Designer best 1.7 (I'm also testing Publisher beta). I still got the same results with the EPS file you sent me. I have attached a screen shot so you can see how the file either opens or places. Also, where 100% black solids are designer "sees" them as 400% black. You can see in the attached images how some things are missing when you compare to the original EPS image I sent you yesterday. Let me know what you think and thanks! Jim K
  17. I'm running version 1.6.1. I didn't know there was an update to 1.7. I down loaded your file but some of the inner targets are missing such as 1x1 checker spot size verification. If there is an update to 1.7, the Apple App Store has not updated me. Thanks Jim K
  18. Attached is one of the EPS files that locks up Affinity Designer but loads in Illustrator CS5 just fine.Let me know what you think. Jim K VS1P07U.EPS
  19. I'm trying to place some EPS files that are used as control targets for Offset Printing. When I try to place them the import window pops up and all I get is the "spinning beach ball" (I'm on a Mac). Not all EPS files do this but these control targets do. Any ideas on this one?? Thanks Jim K
  20. V_kyr - thanks for all your help but I solved the issue. Usually when you give a PDF off to a printer (offset or digital) they will add their own profile. What I needed to do was not use a preset (I’ll create my own) and uncheck to “embed profile”. I also unchecked honor spot colors (since I had none) and over print black as I wanted black type at 100% so it would knock out underneath. That work perfectly. If you are handing off the Affinity Designer file (or any Affinity file or folder (Publisher) you can leave a profile. The printer then can change or use the one you selected. I.e. Uncoated sheetfed, etc. Anyway, problem solved. I was just use to using Photoshop, Illustrator, InDesign and in the very early days Pagemaker and Quark!!! Thanks again. James
  21. V_kyr - thanks for your reply. I do understand the difference between True black and Rich black. In my case I did set the type to 100% black, C, M, Y at 0%. When I bring the PDF file into Acrobat and check separations - only when the profile is set to Generic CMYK does it show the black at 100%, and CMY at 0%. If I change the profile to, for example, Web coated black is a combination of CMYK. Illustrator does not do that. I’m trying to understand why the values are changing. I know the printer will apply their own profile. James
  22. I'm not sure what I am doing wrong but I create a document in CYMK. I want the type to be 100% black (not a 4-color build). I also do the same for any drop shadows. Now to hand off the project to my printer as a PDF (for print). Unfortunately when I bring the PDF into Acrobat and check separations the type and drop shadows are now a 4-color build not the 100% black I made it. Either I am doing something wrong or there is a bug in Designer. Any ideas on this one?
  23. I am running version 1.7 beta and you are correct - I was able to import images from a CD. Normally one would transfer images from a CD to a drive but not always. Thanks!!
  24. I’ll try placing the file tomorrow. I had a similar problem when trying to place an image from a CD into Affinity Publisher. I have not tried Designer - I’ll do that tomorrow.
  25. Thanks - Yes, if I copy the images from the CD to the Mac’s hard drive they open just fine. If I try to open them from the Images CD I get the “Read Only” error. James
×
×
  • Create New...

Important Information

Please note the Annual Company Closure section in the Terms of Use. These are the Terms of Use you will be asked to agree to if you join the forum. | Privacy Policy | Guidelines | We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.