-
Posts
946 -
Joined
-
Last visited
Reputation Activity
-
Gnobelix got a reaction from ACPhillips in SVG Image Not Filling - Pls Advise
Hello @ACPhillips,
I would draw a rectangle on and fill it with the faber of choice.
Then nest the SVG file with the rectangle.
I do not know if there are other methods.
cheers
PSS LOGO w URL - WHITE - SVG.afdesign
-
Gnobelix got a reaction from JayTac in trouble with Pentax file
Hello @BartHovis,
I know the problem,
In Develop Persona, activate the development assistant
setting in Exposure bias: Take no Action.
With these settings you can open PED files without any problems.
Cheers
-
Gnobelix got a reaction from Old Bruce in Incomplete background erase after masking an object
Hello @Johann Dietz,
I downloaded your file, what confuses me a little is that it is an Affinity Photo file.
But no matter, I think you are not using the correct brush tip.
If you're working in designer, switch to the pixel persona, and choose a brush tip for the eraser from the basic collection.
That should solve the problem.
The same applies to Affinity Photo.
Cheers
-
Gnobelix got a reaction from jmwellborn in Having Problems Changing These Two Objects In Photo
Hello @Scott_11A,
I have edited the Image Quick and Dirty.
For better control of the work steps,I proceed as follows.
1. duplicate the image and make a perspective correction.
2. Created a new layer and removed the candle with the clone tool and inpainting tool. Make sure that in Settings, Current Layer and Below is activated.
3. Left side of the cat, same procedure as Nr.2 (Created a new layer and .......)
4. Created a new layer for the Cat-whiskers, these are drawn with the Paint Brusch and adjusted with the Gaussian blur.
The final step, merge the edited layers and and sharpen with the high pass filter (Blend Mode Hard Light or Soft Light)
Cheers
new_modified_current-1.afphoto
-
Gnobelix reacted to Scott_11A in Having Problems Changing These Two Objects In Photo
Thank you so much for this. I'm still a long way from being as facile with Affinity as you clearly are!
-
Gnobelix got a reaction from Alfred in Having Problems Changing These Two Objects In Photo
Hello @Scott_11A,
I have edited the Image Quick and Dirty.
For better control of the work steps,I proceed as follows.
1. duplicate the image and make a perspective correction.
2. Created a new layer and removed the candle with the clone tool and inpainting tool. Make sure that in Settings, Current Layer and Below is activated.
3. Left side of the cat, same procedure as Nr.2 (Created a new layer and .......)
4. Created a new layer for the Cat-whiskers, these are drawn with the Paint Brusch and adjusted with the Gaussian blur.
The final step, merge the edited layers and and sharpen with the high pass filter (Blend Mode Hard Light or Soft Light)
Cheers
new_modified_current-1.afphoto
-
Gnobelix got a reaction from Chris B in Dragging Document with Huion Tablet is Incredibly Janky
Hello @TheMetaFace,
I use a Huion H1060P tablet, without any problems.
Is the latest driver installed? click here.
Set in Preferences-Tools on HIGH PRESION, then all pen-button settings should work.
Disadvantages is, two points are set when the pencil is placed on the tablet.
Is set in Preferences-Tools Windows INK, then pen-button do not work.
This should be known to Serif, it has been reported several times a long time ago.
Cheers
-
Gnobelix got a reaction from Greggry P in New Vector Piece: Dia de los Muertos 1 - “La Calavera Catrina”
wow, big cinema.
-
Gnobelix got a reaction from JeffGreen in Sony ARW files cropped
Hello @JeffGreen,
Welcome to this forum.
I think the problem is the lens correction...
Affinity Photo applies the Sony EP2 18_105mm f/4 G OSS profile, this does not seem to be the right one.why ever.
Set the distortion to minus 27, or apply the profile Sony FE 24-105mm f/4 G OOS.
I hope this helps.
Cheers
-
Gnobelix reacted to Sam Neil in Affinity Publisher Customer Beta - 1.10.1.1138
That's a bit unfair. The software has to be released at some point and cannot remain in BETA forever. There will always be issues and regressions so cut the team some slack and FYI AP is much faster and perhaps you should give more detail on the issue as to why it is slow on YOUR machine and not the rest. It is very easy to become a critic but it is not helpful if you are throwing something in there just because your are frustrated!
-
Gnobelix got a reaction from R C-R in Jpeg file contains non-pixel elements -- but it does not
Here too the warning message under windows 10 as described by @R C-R
Cheers
-
Gnobelix reacted to Videowolff in Affinity Photo Crashed with New Version 1.10.0
So I have started having many crashes since updating to 1.10. Usually when I try to use FX or the Mesh/Perspective tools though sometimes it happened when I was simply resizing things.
All drivers are up to date. I tried with GPU acceleration off, then on and neither altered the problem. So I downgraded back to the previous version Did lose about 30 minutes of work though
-
Gnobelix reacted to Subclavius in Constant freezing of Affinity-Photo (.1127)
@Gnobelix, just a thought: I note that the live perspective filter is buried in between other layers. Does it make a difference if, for example it is on top? Is it worth deleting some of the other layers and see whether you still get the crash? That might point the finger at an interaction between layers rather than the filter itself.
-
Gnobelix reacted to SPaceBar in Constant freezing of Affinity-Photo (.1127)
Hi @Gnobelix Is this photo specific or does it happen on any photo that you try?
-
Gnobelix got a reaction from walt.farrell in Flowing Filler Text to additional pages crashes Publisher 1.10.0.1098 Beta
I can reproduce the crash, as described by Walt and Andreas.
Cheers
-
Gnobelix got a reaction from Dan C in Perspective Warp/Smart Object?
Hello Nic,
as @RNKLN has already mentioned above, Affinity Photo cannot display all the smart objects of Photoshop.
So the mock-up files have to be edited a little.
Add a new LifeFilter Perspective layer to the "Edit Here layer", and edit the perspective as desired.
Now the inserted images are displayed with the correct perspective.
See attached Affinity files.
Cheers
herrei1.afphoto herrei6.afphoto herrei7.afphoto
-
Gnobelix reacted to DavidDoesAffinity in Editing a text frame in Photo.?
Thank you both for confirming I had not missed something obvious.
-
-
Gnobelix got a reaction from PeteMacca in Affinity Photo 1.9.2.1035 - Straighten Tool not working if Window is set to Float
Hello @PeteMacca,
I have the same problem here,
the Straighten Tool works in the floating window, when the CTRL key is pressed.
It's strange.
Cheers
-
Gnobelix reacted to PeteMacca in Affinity Photo 1.9.2.1035 - Straighten Tool not working if Window is set to Float
Unless I'm doing something wrong (which is always possible), the Straighten Tool does not work if the document Window is set to Float. It does work if the document Window is set to Dock.
When set to Float, the Straighten Tool reverts to the Crop Tool the moment it's applied to the document.
No big deal, as I'll just Dock the Window.
Oh..., and it happens in Beta 1.9.4.1048, too.
-
Gnobelix reacted to Komatös in Photo 1.9.2.1035 reproducible crash
However, this is the only possible way to work with the programmes at the moment. 😟
-
Gnobelix reacted to Sapiento in First tip duplicated when using the paint brush tool with a pen and tablet
Thank you, Gnobelix! This fixed the problem.
But now the large image brushes have an extrem lag. Any solution for this?
EDIT: Tablet input Mode: Low Precision also fixes the issue, without causing any lag. So my guess is it's rather a software issue instead of a driver problem. Maybe the programmers should have a look into this.
-
Gnobelix reacted to Smee Again in Tablet Setup for Designer
It does work perfectly when the user isn't dealing with effects of chemo.
I had not made adjustments with the brush. Chose pressure to moderate both size and fill . . . then left both sliders set to "Zero" which isn't going to do anyone any good.
No defect in software, only in this end user.
-
Gnobelix got a reaction from Smee Again in Tablet Setup for Designer
Hello @Smee Again,
I think the Huion H610 should work fine in all Affinity software.
The pressure properties are set in the menu bar.
Another tip: activate Windows INK in both Affinity and Huion drivers.
Cheers
-
Gnobelix got a reaction from Petar Petrenko in Frequency Separation Video Tutorial
You mean this video
Cheers