Jump to content


  • Content count

  • Joined

  • Last visited

Everything posted by larsh

  1. larsh

    start Apu

    Hi, starting Apu a second time and load the old file, it says: not found, would you like to search? Say: No, and the loading is ok at all. by, lars
  2. larsh

    Fine, but big file

    Thanks Chris. I didn´t understand it correct, my english you know. But it seems clear now: "images linked" does not work. To change the document setup to "embedded" changed nothing. The images are embedded, 740 MB file. If the image directory is deleted, the .afpub runs, make PDF, and blurb.de say: correct. But allways if I moved the afpub out from the image directory or something else, and change the directory name and move it, next open it gives me a table as in the attachment. Then I say: cancel, and it works. The number what is asked for is allways the titel (and again in the book). So for me it is clear. best, lars
  3. Hi, the APu runs fine for my (simple) work. 70 images in a book 70 pages, 25x20 cm, some Text, page numbers. The image files around 5 MB each as JPG. But the file has 660 MB, the images are linked. But moving the file out of the directory and the directory to another place, give it a new name too, it runs. Starting there was a text, I should tell where the first image is located, but I cancelled it, it runs. How is that possible? Where there only little images shown or did the system found the directory? Or are the images included? Best regards, lars There was the problem again, that cmd+back end the programm suddenly. I would like to have only one button to show no frames, only the print view.
  4. larsh

    Fine, but big file

    Ja, that´s it. Thanks, Gary. I saw now, it is not necessary to use the: load image icon, which move the images fixed over the book. One can open Finder beside and move from there images in auto-frames to pages. Than the snap function makes the rest very quick too.
  5. Hi, I know about the original location, and did this question, so you say: no. In other cases one can open the parcel as in Aperture, Fotos or DNG, if the RAF was included. lars
  6. Hi, is it possible to get the original RAW out of a *.afphoto file? Thanks, lars
  7. Hi, what kind of a macbook I need at least to work with 50 MB RAW? There is now a MacBook Air i5, 1,3 Ghz, 4 GB Ram. That works, but very slow, it becomes hot and often the ventilator runs. Thanks lars
  8. Ja, thanks, I will get another mac, i7, then we will see. Normally I use Aperture, sometimes for specials AP. I yust tried RAF to PGN, may be it is a little better, it became hot but without the ventilator. lars
  9. In the german translation it is used: Tiefenschärfe, that means: sharpness of the depth, that is not possible (but depth of field is the same?). Schärfentiefe: the depth of the sharpness, correct. Better: Schärfebereich, field of the depth.
  10. larsh

    txt field

    Hi, to delete an empty txt field with BACK works only once, most nothing happens. And CMD+BACK let AP then sometimes crash. The restore function brings it again. lars
  11. Hi, the best wishes for your new project. It works with PDF on blurb.de, the writing inclusive. 1. after choosing an image and set it to a page and choose the next one, it was fine to come to the last one again, not to the top of the directory: for I often set groups of images page by page. 2. was fine to move the table with the images beside, so I can see which I got to this time. Even if separeted mode is on it does not work as I like it. The pages should be to move if this table is open to find the place to insert a special image (my last print had 220 images). Or it should be possible to insert images in the icons of the pages left. 3. the blue frame around the images sometime moves beside the image. 4. For prints I need images with 300 dpi, sometimes in the directory they have 72. Can you make it that it will move nearly into the page if going upon it with the mouse, otherwise the image is bigger as the screen; details can be done later. 5. If I set some masterpages with the number of page and at the end I want to delete the number it is not possible. To change a master page into a normal page was fine. 6. to ad ONE new page does not work, come two. 7. to set letters to special points does not work, to mark them does not help. regards, lars
  12. Hi, starting with a new camera (Fuji x pro 2) I look for an image manager. Till now it is Aperture, I like it, but it is old and it is not possible to use old mediatecs in Fotos. Apple will crash it some day, who knows... What is used by you? Low cost, please and with future (open source?). To have a first step (as Aperture) to manage images and to edit quick a first time, then bring some single images to AP... To read Aperture mediatecs was fine. Slide maker is not needed. Thanks lars By the way: runs AP comperessed RAF?
  13. The result: I saw some fotomanagements now (not LR). Think Aperture is ok for me. Seems there is a way after it is stopped some day by mac with or after Fotos. What I do not understand is how to use AP for RAW/ RAF in a fluid process. If AP shall be the RAF-machine it has to be done first. From the camera to a directory. How do you do that? OK, no answer. Or starting with Aperture from the camera then the RAF must send out again and be loaded in AP. To bring a pic direct from Aperture to AP it is changed to TIF. On this way with my very simple pic editing the RAF can be worked out in Aperture (Fuji says one shall use the cameras processor). So AP is not needed normaly. Or is there a way to give RAF out of Aperture to AP and get a TIF back? regards, lars
  14. Hi, some more infos. The camera is fine; to use it as a hammer too. But not only the compressed pics make problems in Aperture and Fotos. Both don´t read them [and Aperture shows the focuspoint on the monitor in the not-compressed - no, my mistake to klick wrong]. It will not take long time and there are more problems... So I need another image manager. The Android Photo Mate R3 reads both, fine. Cheers! lars
  15. Hi Gabe, the compressed RAF/ RAW are ok. And in Fotos the Aperture files can be read after the first Fotos file is moved out of the directory... Best lars
  16. Hi, I will do after the camera is here. regards lars
  17. Hi, that´s what I was asked for: 1 click. As I do it in Aperture in several ways... lars
  18. Hi, ist there a tool to change the size of 200 images, with all the same size, to the same smaller size? From one directory to another one? I had some looks to macros and... Thanks lars
  19. Hi, working only with the JPG – that is what I did till now after using the digital camera. Eving in printing (blurb) it is ok. But meeting a professional designer I should know a little more and send RAF+JPG. regards lars
  20. Smadell, thanks a lot! There is no hurry. I saw now the history saving/ Protokoll mit Dokument speichern. Will check it later. 1. My first problem is easier. I shall make some photographs, a designer shall work with it. So I would like to show her what I think is the best way (in RAF or JPG). She may use the origin RAF and follow or not. Now it seems to be the best to send a copy of RAF and JPG to her (using Aperture). With Email or cloud... I don´t think we will really work both on it. She is not known now. But I will not not look as a child when starting. 2. My second question is for my own, I only need basics (twice a year): is it necessary to work in develop persona? Or is it ok, the same, loading the RAF, develop it without change and then work in AP as an other photo, JPG or what ever. Will on this way quality be lost? 3. Now I see PNG, is it as good to use as TIF or 100% JPG? best lars
  21. Hi smadell, thanks a lot, is hard work. 1: I saw the whitepicker but don´t unterstand for I looked for the colorfield as in studio. In my tools in dp there is not the sign for it as in yours. But RGB... can be read in: Info. Not importend. 2: In dp the image cannot be saved. If going to pp and save it, I can go back to dp, but what was changed, may be the curves, is fixed and not to see what I did in detail, all is set to zero/ start. Export only works in pp. Right? 3: Till now I allways worked with the JPG coming from the camera, and the RAF/ RAW was only safe copy. Now I have to work for another editor. I hoped to give the RAF to her after making MY development as PNG, JPG, whatever is wished. Then the editor can, I hoped, see my changes and correct it. But this is impossible I see/ think now. If I make a copy from it or save it, my work is not to see in detail in the RAF which is sent to her. Even she uses AP she cannot take the *.aphog and go on at my tries. Right? 4: So the question is again: if devoloping the RAF without any changes and give it to pp, is it possible then, to get the same good result as working in dp (if I understand you right: no). So only at one computer the RAF can be worked out and set to a print copy. If I want to show the editor as I would like the result I have to do it in the JPG comig out of the camera, can tell something and send the color values for a special wall etc., and she may copy it by hand in the RAF. Right? Or is there another way to work with two AP-computers at the same image? Cloud? Best regards lars
  22. Hi, why there is no answer here? It is what I want to know. If there is not needed the special changes with the lens or making overlays is it the same to develop first and then use Persona? Or is it better to use the tools in develop p. first? In the workbook it seems to be the second way is ok. Only few points to work with dp. Is there a pipette in dp to find a white point? What, please, is the common sort of file in graphics field to give it to the printer, PNG, TIF? Thanks lars
  23. Now there comes Tiffen, one of two cards, they say this follows Kodak. It is the wide zoom with 55 mm with flash now (not 18 as before) and shown in 100%. The card stands in the images center. And it is from the JPG, not the RAF. Shown is the grey circle field between white and black, the same as the background: nearly RGB 128! Another question, my eyes are not so good: is it true, that a RAW/ RAF which is direct developed without any editing is not so sharp and light as the JPG? MUST a RAF be edited to use before developed? The colors of card two are very different as on the first cards I showed above. It makes no sense, I beleave now, to check the colors if the card lies not beside the printers computer. And the Tiffen is well known (in museums). The neutral grey is the main point. The JPG below is not edited, it is the image from the camera, but I set the dark and light in the camera to zero now (not both -1 to make the contrast later in the computer as it was set before). Thanks (it is 20 years ago that I worked with paintings and a big flash) lars
  24. Good morning, we try English again. AP is only used once a year, so I forget all... And greycard is not found. Please tell me how to change the whole image clicking the greycard in it; or another color. Thanks, regards lars
  25. Hi, you are right in all, I did not look at this and sent the wrong JPG. Only want to show, that it generally works with whitebalance to get grey: x, x, x. To get 128, 128, 128 in an image (!) the card must be lightened perfect, I think. It shall be neutral, that´s it. But the colors, as you see above in my rows, say: several ways give nearly the same values (some difference make the smartphone and the light). But in this card colors are all wrong. I will try a tiffen card next. It makes no sense to give a color card into the motiv of a painting, if the printer has not the same color values, isn´t? In former times in museums here they had a Kodak card to make the "Ektachromes" from paintings, as it is called till today. regards lars