h_d
-
Posts
1,472 -
Joined
-
Last visited
Posts posted by h_d
-
-
You can also double-click on the individual brushes in the Brushes Panel and edit a much wider range of parameters:
-
Hi @Dankzy and welcome! Just a possibility - click the More button in the Contextual Toolbar and make sure that Accumulation is set to 100%:
-
With a brush selected, try with different settings of the Controller:
I don't have my Wacom wired up right now, but I seem to remember that Brush Defaults works better than None.
Cheers,
H
-
Not easy if you want to edit the text afterwards, but if it's a short phrase you could:
Create each letter of the phrase as a separate layer of artistic text and adjust alignment and spacing as required'
Place the images in the document and then clip them to the individual letters:
(Cats from Unsplash).
IMO this makes it slightly easier to adjust the images to fit the letterforms, while retaining the ability to edit the individual letters of the text.
-
6 minutes ago, Lagarto said:
It can also be a table of an Excel file
I tried that without success - I'll give it another go. But generally it's pretty flexible - even without Excel (like me) you could do something similar with Numbers and export as .CSV/.TSV.
-
-
-
The link to the beta forum for Affinity Publisher is in my previous post, but here it is again. Don't visit any dubious websites! Click on the forum that corresponds to your OS and there are download links in the official Affinity posts. Cheers, H
-
3 minutes ago, TTB_FIRE said:
Is there any way to create my own lensprofile
Apparently so, here. Looks like it takes the 'fun' out of 'Lensfun'.
-
Hi @dwct8 and welcome! Might you have been using a second monitor at some point and dragged the panels off to the right? And then switched to a single monitor?
-
-
Hi @JamieL
0.2pt is approximately 0.07mm (seven hundredths of a millimetre) or 0.0028" (twenty eight thousands of an inch). You're talking about differences in rule weight that are practically imperceptible to the human eye, and I really don't understand how you can claim to be able to tell the difference between 0.1pt and 0.15pt.
Ink spread on your printer is probably influencing the weight of the output rules - it wouldn't surprise me if the difference (such as it is) is accounted for by the direction of printing and the weave of the paper. In practical terms, I seriously doubt if anyone reading the output document is going to notice the difference.
No offence meant,
H
-
I'd be happy to, but I don't think cell selection will be maintained when I share the document.
By all means send me a pm with your email address.
One thing I've noticed - if I hover the table tool over one of the cell borders, the tool cursor changes to the table icon (as opposed to the I-beam editing cursor), and if I then drag, it draws a new table as you described above. You need to click in the centre of a cell to select the existing table rather than draw a new one.
-
3 minutes ago, DianeF said:
Were you able to select a cell using this method with the file that I included with my post?
Yes, I was working on the file you uploaded.
I'm at a bit of a loss as to what to suggest, as I have no problem selecting the cells in your document using the method I described. -
Hi @stokerg
I've attached the .xlsx file I could place and the .afpub document I placed it into, but I should point out that I used Apple Numbers to do the unmerging and then exported as .xlsx, as I don't have Excel itself. I don't think it should make any difference.
Cells A2 and B2 (second row, first two cells) need to be unmerged as well as all the cells in the first row.
Cheers,
H
Student Enrollment By Ethnicity Fall 2011.xlsx student table.afpub
-
20 minutes ago, DianeF said:
when I print the page out, the first two columns are definitely darker than the other two.
Once you get the knack of selecting the cells, you'll see that all the 'grey' ones have the same fill: 3C3M3Y0K. The optical illusion persists on paper.
-
8 minutes ago, DianeF said:
So, how do I see those header rows that will allow me to select rows and columns?
Select the Table tool. Don't drag, but double-click into one of the cells. The cell will be selected and you'll see the row and column headers. You should have an I-beam cursor (as in my vid). You can then drag to select more cells.
-
49 minutes ago, DianeF said:
The second problem occurs when I try to change the colors of the narrow columns on the righthand side of the page. No matter how many times I select these columns (when I'm even able to do so), and change the color to 5% black, the color never changes. You can see that the first two shaded columns are lighter than the last two because of my inability to make a change.
The fill colour is again set in the Stroke and Fill section of theTable panel:
Double-click into the top cell, then drag down with the table tool to select the rest of the column.
The cells are currently a rather washed-out mix of CMY, but you can set the '3' values to zero and adjust the K (black) as required:
Hope this helps,
H
-
36 minutes ago, DianeF said:
What I'd like to be able to do is to automatically populate the dates throughout the planner by inserting a function on the master page similar to what I did by using the Page Number function after Week. Is this possible?
I don't think so, no. You could use other software (Excel, or Numbers on MacOS) to generate the tables and import them
-
34 minutes ago, DianeF said:
You can see that the first two shaded columns are lighter than the last two
I believe it's an optical illusion due to the absence of vertical rules around those cells. Again, change the border colour from white to black and the fill looks pretty much the same:
-
28 minutes ago, DianeF said:
First, one of the lines on the table does not go all the way across the page, and I can't figure out how to fix this.
The colour of the upper border of the lower cell has been set to white, so you can't see it against the white background:
Information from the Table panel (View-Studio-Table).]
-
Hi @farazijaz and welcome.
You access the Pantone colours through the Swatches panel (View-Studio-Swatches), not through the colour mixers:
-> Cheers, H
-
3 hours ago, giaco51 said:
If you look in Youtube for this "Data merge Setting up a data file in Excel to merge with InDesign (720p)", what you describe sounds very similar to what will work in Publisher. Please share any additional thoughts you might have.
I watched the video you referred and the process of setting up an Excel data file described there seems almost identical to what you do with Affinity Publisher. It requires a .csv or tab-delimited text file with a header row. The only major difference I can see is that you don't have to go through the shenanigans of typing an @ character in the header for linked images. If the data file is in the same directory as the images, then just the image name seems to work. Otherwise, as hinted at but not really explained in the video, you can include full paths, which could be quite cumbersome.
This is a grab of a dummy .csv file I've been using to try it out, created in a text editor but the principle is the same as in Excel:
(I would stress that this is dummy data, not real names and passwords
)
I wouldn't want to add more about the data merge process here as it's still in beta and it may change/improve before release. But generally speaking I've been pretty impressed.
-
FWIW I get the same crash on MacOS. Unmerging the cells as suggested by @GarryP, placing and re-merging in Publisher worked for me too.
-> 
)
1.9.0.203 : Styles only affect pattern layer
in [ARCHIVE] Photo beta on macOS threads
Posted
See screenshot - apply a style (or layer effect) to a Pattern layer and it isn't replicated in the replicants(?)
Cheers,
H